Carpentry, Electrical Requirements | Frigidaire 318201534 specification

MICROWAVE/ WALL OVEN COMBINATION

INSTALLATION INSTRUCTIONS

Important Notes to the Installer

1.Read all instructions contained in these installation instructions before installing the combination oven.

2.Remove all packing material from the oven compartments before connecting the electrical supply to the wall oven.

3.Observe all governing codes and ordinances.

4.Be sure to leave these instructions with the consumer.

5.Oven door may be removed to facilitate installation.

6.THIS COMBINATION OVEN IS NOT APPROVED FOR STACKABLE OR SIDE-BY-SIDE INSTALLATION.

Important Note to the Consumer

Keep these instructions with your Owner's Guide for future reference. Do not discard oven removal tools found in the literature bag.

IMPORTANT SAFETY

INSTRUCTIONS

•Be sure your combination oven is installed and grounded properly by a qualified installer or service technician.

•This wall oven must be electrically grounded in accordance with local codes or, in their absence, with the National Electrical Code ANSI/NFPA No.70- latest edition in United Sates, or with CSA Standard C22.1, Canadian Electrical Code, Part 1, in Canada.

Stepping, leaning or sitting on the door of this wall oven can result in serious injuries and can also cause damage to the wall oven.

•Never use your wall oven for warming or heating the room. Prolonged use of the wall oven without adequate ventilation can be dangerous.

The electrical power to the oven must be shut off while line connections are being made. Failure to do so could result in serious injury or death.

1. Carpentry

Refer to page 1 for the dimensions applicable to your appliance, and the space necessary to receive the combination oven. The oven support surface may be solid plywood or similar material, however the surface must be leveled from side to side and from front to rear.

2. Electrical Requirements

This appliance must be supplied with the proper voltage and frequency, and connected to an individual, properly grounded branch circuit, protected by a circuit breaker or fuse. To know the circuit breaker or fuse required by your model, see the serial plate to find the wattage consumption and refer to table A to get the circuit breaker or fuse amperage.

Appliance	Protection	Appliance	Protection
Rating Watts	Circuit	Rating Watts	Circuit
240V	Recommended	208V	Recommended

Less than 4800W	20A	Less than 4100W	20A

4800W - 7200W	30A	4100W - 6200W	30A

7200W - 9600W	40A	6200W - 8300W	40A

9600W and +	50A	8300W and +	50A

Table A

Observe all governing codes and local ordinances

1.A 3-wire or 4-wire single phase 120/240 or 120/208 Volt, 60 Hz AC only electrical supply is required on a separate circuit fused on both sides of the line (red and black wires). A time-delay fuse or circuit breaker is recommended. DO NOT fuse neutral (white wire).

NOTE: Wire sizes and connections must conform with the fuse size and rating of the appliance in accordance with the American National Electrical Code ANSI/NFPA No. 70-latest edition, or with Canadian CSA Standard C22.1, Canadian Electrical Code, Part 1, and local codes and ordinances.

An extension cord should not be used with this appliance. Such use may result in a fire, electrical shock, or other personal injury. If you need a longer power cord you can purchase a 10' (3 m) power cord kit #903056-9010 by calling the Service Center.

2.These appliances should be connected to the fused disconnect (or circuit breaker) box through flexible armored or nonmetallic sheathed cable. The flexible armored cable extending from the appliance should be connected directly to the junction box. The junction box should be located as shown in Figure 1 and with as much slack as possible remaining in the cable between the box and the appliance, so it can be moved if servicing is ever necessary.

3.A suitable strain relief must be provided to attach the flexible armored cable to the junction box.

318201534 specifications

The Frigidaire 318201534 is a versatile and essential appliance component designed to enhance cooking efficiency in modern kitchens. This range touch control board is an integral part of many Frigidaire built-in and freestanding ranges, providing users with intuitive control over their cooking experience.

One of the standout features of the Frigidaire 318201534 is its user-friendly touch interface. The control board allows for precise temperature settings and cooking functions, giving users the ability to tailor their culinary endeavors to their liking. The digital display is easy to read, ensuring that users can effortlessly monitor cooking times, settings, and temperatures.

In terms of technology, the Frigidaire 318201534 is equipped with advanced electronic circuitry that facilitates optimal performance. This electronic control board works seamlessly with various heating elements and oven functions, ensuring that the appliance delivers consistent and reliable results. The integration of technology not only simplifies the cooking process but also enhances safety features, including timers and automated shutoff mechanisms.

The construction of the Frigidaire 318201534 reflects durability and reliability. Made with high-quality materials, it is designed to withstand the rigors of daily cooking while maintaining performance over time. This durability guarantees that users can depend on the control board for many meals to come, minimizing the need for frequent replacements and repairs.

Another characteristic of this control board is its compatibility with various Frigidaire range models. This universal aspect makes it a highly sought-after component for homeowners and appliance repair professionals alike. Installation is straightforward, making it accessible for those who prefer DIY repairs.

Maintenance of the Frigidaire 318201534 is relatively easy, as users can clean the touch surface with a damp cloth to keep it free from grease and residue. This feature ensures that the control board remains aesthetically pleasing while also functional.

In conclusion, the Frigidaire 318201534 range touch control board is a pivotal component that embodies modern cooking technology. With its user-friendly interface, robust construction, and compatibility with various range models, it enhances the cooking experience for users of all skill levels, making it a valuable addition to any kitchen.