Roksan Audio FR - 5 user manual Loudspeaker Spikes, Carpet, Locknut, Wood Screw

Page 8

LOUDSPEAKER SPIKES

In order to realise the full potential of your Caspian FR-5Loudspeaker system, it is necessary to locate each of the loudspeakers as rigidly as possible on the ground. Using the supplied set of spike feet, image stability, transparency, definition and attack of the sound will improve as the loudspeakers are rigidly coupled to ground. Three most common setups are described below.

Concrete Floor

If you have a carpeted floor on concrete, the spikes should be used with their pointed end facing downwards, piercing the carpet and making contact with the concrete surface. Adjust the spikes so that the loudspeaker is level with respect to the floor. (horizontally & vertically) Use the supplied spirit level for accurate levelling of the FR-5 loudspeakers. Try to ensure that both loudspeakers are aligned to more or less the same height. Check the loudspeaker is not ‘rocking’ by pushing down on opposite corners of the top of the loudspeaker. Adjust the corresponding spike on the bottom to prevent any ‘rocking’. Once you are satisfied with the rigidity and level, tighten up the lock-nuts.

NOTE:

Please note there are NO items such as electrical

cables, piping etc. immediately under the carpet/floor where the spike positions are.

LOCKNUT

SPIKE

CARPET

CONCRETE

Carpeted Floor Boards

The procedure for carpeted room with floor boards is the same as for concrete floor. However, a more rigid mounting can be achieved by the following procedure.

After the speaker has been on the carpet for a little while, the spikes would make an impression on the surface of the carpet. By carefully removing the loudspeaker from its position without disturbing the spike impression on the carpet, four ‘cross-head’ wood screws can be fitted, one in each of these impressions. Remember to use large enough size screws to ensure good final rigidity of the loudspeaker cabinet relative to the floor boards.

NOTE:

Please note the screws should NOT be too long as these could go through the floor board and cause serious damage to any cable, structure or piping under the floor boards. It is equally important to ensure there are NO other items, electrical cables etc. under the carpet where the spike positions are.

Adjust the spikes and level the speakers as outlined above.

LOCKNUT

SPIKE

WOOD SCREW

CARPET

FLOOR BOARD

Roksan Audio ltd

Caspian FR-5 Loudspeaker User Manual

CLASSIFICATION: General Use

Version: 1.07

All specifications are liable to change without notice. E&OE

Page 8 of 12

ENGLISH

Page 7 Page 9
Image 8
Page 7 Page 9
Contents S p i a n K S a N a U D I O L I M I T E DT R O D U C T I O N UnpackingMaintenance U T I O N SInstallation Roksan Caspian FR-5 Loudspeaker Front & Rear ViewEnglish Important Note Connecting Loudspeaker CablesT U P Bi-wiring Loudspeaker Spikes CarpetLocknut SpikeE R a T I O N  NoteSpike Shoe Final PositioningTroubleshooting Symptom Likely Cause Suggested RemedySpecifications A R a N T E EEmail info@roksan.co.uk

FR - 5 specifications

Roksan Audio FR - 5 is a high-end turntable that offers audiophiles a perfect blend of modern technology and classic design. This turntable is designed to deliver exceptional sound quality while providing an aesthetically pleasing experience.

One of the standout features of the FR - 5 is its precision engineering. The turntable is crafted with a heavy, rigid chassis that minimizes vibrations and enhances sound clarity. The weight of the turntable helps reduce unwanted resonance, allowing for a more accurate playback of vinyl records.

At the heart of the FR - 5 is a high-quality platter that is constructed from a special composite material. This innovative design contributes to the turntable's overall performance, as it ensures stable rotation and optimal speed accuracy. The platter's surface is also finely finished to minimize friction and enhance needle tracking, resulting in a smoother listening experience.

The tonearm is an essential component of any turntable, and the FR - 5 features a precision-engineered tonearm designed for optimal tracking. The tonearm is made from lightweight materials, which reduces inertia and allows for a more responsive performance. Additionally, the tonearm is equipped with a high-quality cartridge that captures the nuances of the recorded music, delivering an engaging and immersive experience.

Roksan has implemented advanced technologies in the FR - 5 to ensure exceptional sound reproduction. The turntable includes a sophisticated motor control system that provides smooth and stable rotation at both 33 1/3 and 45 RPM speeds. This level of control minimizes wow and flutter, contributing to a faithful representation of the original recording.

Another notable feature of the Roksan Audio FR - 5 is its user-friendly design. The turntable is equipped with a simple yet effective setup process, allowing users to easily adjust the tracking force and anti-skate settings. This accessibility makes the FR - 5 an excellent choice for both seasoned audiophiles and newcomers to the world of vinyl.

In summary, the Roksan Audio FR - 5 is a remarkable turntable that marries modern technology with classic design principles. With its heavy chassis, advanced platter technology, precision tonearm, and user-friendly features, the FR - 5 promises an exceptional vinyl listening experience that appeals to the discerning audio enthusiast. Whether you are rediscovering your favorite records or exploring new musical territories, the Roksan Audio FR - 5 delivers a sound that is both authentic and engaging.
Top Page Image Contents