Frigidaire 318200964 To Set or Change the Temperature for Baking, To Broil, Failure Modes

Page 10

Setting OVEN controls - Model A

To Set or Change the Temperature for Baking

The oven can be programmed to bake at any temperature from 170°F to 500°F (76°C to 260°C).

To Set the Controls for Baking:

1.Press BAKE pad. "— — —°" appears in the display.

2.Within 5 seconds, press the UP or DOWN ARROW pad. The display will show "350°F." By pressing and holding the UP or DOWN ARROW pad, the temperature can then be adjusted in 5°F increments.

3.When the UP or DOWN ARROW pad is released, the oven will begin heating to the selected temperature. When the displayed temperature reaches the desired baking temperature, the control will beep once (1 time).

4.To cancel the baking function, press CLEAR OFF pad.

To Change the Oven Temperature after Baking has Started:

1.Press BAKE pad and make sure the bake temperature is displayed.

2.Press the UP or DOWN ARROW pad to increase or decrease the set temperature.

To Broil

1.Arrange oven rack while oven is still cool.

2.Press BROIL pad.

3.Press and hold the UP or DOWN ARROW pad until the desired broil setting level appears in the display. Press the UP ARROW pad for HI broil or the DOWN ARROW pad for LO broil. Most foods can be broiled at the HI broil setting. Select the LO broil setting to avoid excess browning or drying of foods that should be broiled to the well-done stage.

4.Place the insert on the broiler pan, then place the food on the insert. DO NOT use the broiler pan without the insert or cover the insert with aluminum foil. The exposed grease could ignite.

5.Place the pan on the oven rack. Close the oven door when broiling.

6.Broil on one side until food is browned; turn and cook on the second side. Note: Always pull the rack out to the stop position before turning or removing food.

7.When broiling is finished, press CLEAR OFF pad.

CAUTION

Should an oven fire occur, close the oven door and turn off the oven. If the fire continues, use a fire extinguisher. DO NOT put water or flour on the fire. Flour may be explosive.

Adjusting Your Oven Temperature

Your new oven has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully. If you feel your oven is too hot or too cool from your baking experience, the oven temperature may be adjusted to your liking.

NOTE

DO NOT adjust your oven temperature based on oven thermometers, such as those found in grocery stores, they may not be accurate.

To Adjust the Oven Temperature (do not use Bake or Broil while adjusting the oven temperature): Note: Your oven control was factory set in the (Fahrenheit) °F Temperature Display Mode. To change for (Celsius) °C, see page 15.

1.Press & hold the BAKE key pad and release after the display shows the factory temperature setting of 00. Note: If the oven temperature has been previously adjusted from the factory setting, the current temperature adjusted value will appear in the display instead.

2.You may increase the oven temperature in 5°F (1°C) increments with each press of the UP ARROW pad to a maximum oven adjustment of +35°F (+18°C).

You may also adjust the oven temperature downward in 5°F (1°C) increments with each press of the DOWN ARROW pad (total range of -35°F to +35°F (-18°C to +18°C).

3.If you do not want to keep the display adjustment, press the CLEAR OFF pad before the oven control beeps. This will cancel the temperature adjustment procedure. To start this procedure over again begin with step 1 above OR;

4.If you want to keep the adjustment, wait until the oven control beeps once.

5.The oven temperature adjustment has be accepted by the oven control and the display will return to the time of day.

Failure Modes

All failure modes give a visual and audible alarm. When display shows F10 (temperature runaway), F30-F31 (oven sensor circuit fault) or any other F error codes, the electronic oven control has detected a fault condition. Note that code and push the CLEAR OFF pad to clean the display and stop the beeping. Reprogram the oven. If fault recurs, push CLEAR OFF pad, disconnect the appliance to prevent damage and contact an authorized servicer.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Use &Care Register Your Product Welcome & CongratulationsPlease Carefully read and save these instructions Important Safety Instructions DefinitionsImportant Safety Notice Oven Ignition Grounding instructionsConversion to liquefied petroleum gas or L.P. gas Features AT a Glance model a Your Gas Wall-Oven FeaturesFeatures AT a Glance Model B Air Circulation in the Oven Oven Vent LocationArranging Oven Racks To Set the Minute Timer Setting Oven controls Model aTo Change the Temperature Display Mode Press Timer ON/OFF padTo Broil To Set or Change the Temperature for BakingAdjusting Your Oven Temperature Failure ModesOven can be programmed to Setting Oven controls Model BTemperature Conversion Fahrenheit/Celsius For a silent control panelTo Set Control for Continuous Bake or 12 Hour Energy Saving Push Timer ON/OFF padTo Set Control for Oven Lockout feature To Set Control for Oven LockoutTo Set the Controls for Normal Baking To Set or Change the Temperature for Normal BakingSetting Broil Broiling TipsWhen the Set Bake Time Runs Out To Set the Bake time FeatureRecalibrating Your Oven Temperature Once the Controls are SetAdhere to the following cleaning precautions Self-cleaningWhat to Expect during Cleaning To Set the Controls for a Self-Clean Cycle To Start the Self-Clean CycleWhen the Self-Clean Cycle is Completed Care & Cleaning Cleaning Various Parts of Your RangeGeneral Cleaning Care & CleaningNon Self-Clean Oven Model a Cleaning the Oven BottomTo Remove and Replace Oven Bottom Broiler Drawer Model a or Storage Drawer Model BRemoving and replacing the lift-off oven door Care and cleaning of stainless steelChanging oven light Baking Problems and Solutions Chart Oven BakingSelf-Cleaning Cycle Error CodeFaulty Installation Cleaning Cycle isPage If You Exclusions This warranty does not cover the followingService Need

318200964 specifications

The Frigidaire 318200964 is a high-quality replacement part designed for a range of Frigidaire cooking appliances. Recognized for its reliability and efficiency, this component is essential in ensuring that your oven functions smoothly. The 318200964 is primarily known as a range surface burner control knob, which plays a critical role in regulating the flame intensity of the burners.

One of the main features of the Frigidaire 318200964 is its impressive compatibility. This part is not only designed for Frigidaire models but also fits various brands within the same appliance category. This versatility makes it an ideal choice for those looking to replace an old or malfunctioning burner control knob without the hassle of replacing the entire stovetop unit.

Durability is another characteristic that sets the 318200964 apart from other replacement parts. Constructed from high-quality materials, it is specifically designed to withstand the heat and demands of everyday cooking. This sturdy design helps maximize the lifespan of the product, ensuring that it can handle both casual cooking and more intense culinary endeavors.

In terms of operation, the Frigidaire 318200964 features easy-grip styling, which allows for precise control over burner settings. The intuitive design ensures that users can easily adjust the flame, helping to achieve the perfect cooking temperature for a variety of dishes. Whether you are simmering sauces, boiling pasta, or searing meats, this control knob provides an excellent user experience.

Technologically, the 318200964 is designed to be straightforward in its installation process. Homeowners can replace their malfunctioning knob with minimal tools, often requiring just a simple screwdriver. The straightforward design not only saves time but also allows for easy upkeep of your cooking appliance.

In conclusion, the Frigidaire 318200964 burner control knob combines compatibility, durability, ease of use, and simple installation. It is an essential component for anyone looking to maintain the functionality of their Frigidaire range or similar appliances, ensuring that culinary creativity can flourish without interruption. This replacement part makes everyday cooking a breeze, allowing home chefs to focus on creating delicious meals rather than worrying about appliance performance.
Top Page Image Contents