Frigidaire 318200929 Cleaning the Manual Clean Oven Regular oven models only, General Cleaning

Page 12

Care & Cleaning

Cleaning the Manual Clean Oven (Regular oven models only)

Porcelain has a smooth finish and is a type of glass fused to metal. Oven cleaners can be used on all interior oven surfaces.

REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE.

REGULAR CLEANINGS WILL REDUCE THE NUMBER OF MAJOR CLEANINGS LATER.

Adhere to the following cleaning precautions:

Allow the oven to cool before cleaning.

Wear rubber gloves when cleaning the appliance manually.

General Cleaning

Remove soils using hot, soapy water. Do not allow food spills with a high sugar or acid content (such as milk, tomatoes, saukerkraut, fruit juices or pie filling) to remain on the surface as they may cause a dull spot even after cleaning.

To Remove Heavy Soil

1.Allow a dish of ammonia to sit in the oven overnight or for several hours with the oven door closed. Clean softened spots using hot, soapy water. Rinse well with water and a clean cloth.

2.If soil remains, use a soap-filled scouring pad or a nonabrasive cleaner. If necessary, use an oven cleaner following manufacturer's instructionsDO. NOT mix ammonia with other cleaners.

Adhere to the following precautions when using oven cleaners:

1.DO NOT spray on the electrical controls or switches because it could cause a short circuit and result in sparking or fire.

2.DO NOT allow a film from the cleaner to build up on the temperature sensing bulb; it could cause the oven to heat improperly. (The bulb is located in the rear of the oven.) Carefully wipe the bulb clean after each oven cleaning, being careful not to move the bulb. A change in its position could affect how the oven bakes. Avoid bending the bulb and capillary tube.

3.DO NOT spray any cleaner on the oven door trim or gasket, handles or any exterior surfaces of the appliance, wood or painted surfaces. The cleaner can damage these surfaces.

To Clean the Oven Bottom

Clean using hot, soapy water, a mild abrasive cleanser, a soap-filled abrasive pad or oven cleaner following manufacturer's instructions.

Ammonia must be rinsed before operating the oven. Provide adequate ventilation.

DO NOT line the oven walls, bottom, racks or any other part of the appliance with aluminum foil. Doing so will destroy heat distribution, produce poor baking results and cause permanent damage to the oven interior (aluminum foil will melt to the interior surface of the oven).

Care and Cleaning of Stainless Steel (some models)

Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining the appearance of stainless steel parts. Please refer to chart provided at beginning of the Care & Cleaning section in this Use & Care Manual.

12

Image 12
Contents Before Setting Care & Cleaning 10-13 Adjusting YourWarranty WelcomeWelcome & Congratulations Product RegistrationSerial Plate Location Questions?Important Safety Instructions Important Instructions for Using Your Oven Important Instructions for Cleaning Your OvenSELF-CLEANING Oven Models Features At a Glance Your Electric Wall Oven Features At a GlanceBefore Setting Oven Controls Setting Oven ControlsAir Circulation in the Oven Arranging Oven RacksCooking Informations Oven BakingBroiling Convection Cooking some models Convection Roasting some modelsConvection notes Care & Cleaning Stainless Steel, Chrome Control Panel, Decorative TrimOven Racks Oven DoorSelf-Cleaning some models To Set the Self-Clean CycleSelf-Cleaning Oven Adhere to the following cleaning precautionsCleaning the Manual Clean Oven Regular oven models only Care and Cleaning of Stainless Steel some modelsGeneral Cleaning To Clean the Oven BottomRemoving and Replacing the Oven Door Special Door Care InstructionsChanging the Oven Light Adjusting Your Oven Temperature Occurrence Possible CAUSE/SOLUTIONBefore you call To remove the hidden bake coverOccurrence Possible Cause / Solution Oven light does not workLimited Warranty Your Wall Oven is protected by this warrantyRéglage des commandes Mesures de sécuritéCaractéristiques Avant l’utilisationEmplacement de la plaque de série Bienvenue et félicitationsEnregistrement de l’appareil Des questions?Voyez les instructions dinstallation Mesures de sécurité importantesInstructions Importantes Pour Lutilisation DE Votre Four Instructions Importantes Pour LE Nettoyage DE Votre FourCaractéristiques de lappareil Les caractéristiquesDe votre four encastré Réglage des commandes du four Installation des grillesAvant l’utilisation du four Circulation de l’air dans le fourInformations de cuisson Cuisson au fourCuisson au gril Cuisson par convection certains modèles Rôtissage par convection certains modèlesConseils sur la convection Entretien et nettoyage Grilles du fourPorte du four Réglage des commandes du four pour un cycle autonettoyant Préparation au cycle d’autonettoyageSuivez les précautions de nettoyage suivantes Nettoyage généralPour enlever la saleté accumulée Pour nettoyer le fond du fourEnlever et réinstaller la porte Remplacement de lampoule du fourInstructionsspécialespourl’entretiendelaporte Avant de faire appel au service après-vente Problème Cause Possible /SOLUTIONAjustement de la température du four Enlever le couvercle de lélément caché certains modèlesProblème Cause Possible / Solution Lampoule du four ne fonctionne pasGarantie Limitée Votre appareil est protégé par cette garantie