Roksan Audio M series 1 user manual E R a T I O N, MULTI-WIRING and MULTI-AMPING, Switching on

MULTI-WIRING AND MULTI-AMPING

Multi-Amping The Loudspeakers Operation

If the Loudspeakers utilise more than one drive unit with individual input terminals, for example a Tweeter and a Woofer, then the loudspeaker performance will benefit from Bi-Amping. Dedicating one amplifier to the Tweeter and another to the Woofer isolates them from each other hence reducing distortion and increasing reserved power. Speakers work far better with most amplifiers when Multi-Amped than using one yet more powerful amplifier. Note: Bi-Wiring reduces the impedance seen by the Woofer and the Tweeter and is a first step towards Bi-Amping.

O P E R A T I O N C a s p i a n Mono Power Amplifier

Please refer to the front and rear panel views on page 4.

SWITCHING ON

The Mains power switch (8) is located on the rear panel of the amplifier. This switch should be left ON for normal operation. If unattended for a long period, the Mains power should be switched OFF and the lead disconnected from the Mains socket on the wall.

When switched ON from the rear panel, after running a quick self-test your Caspian Mono Power Amplifier enters operational mode. The MODE Indicator Light (1) will glow RED.

Roksan Audio ltd		Caspian Mono Power Amplifier User Manual
CLASSIFICATION: General Use	Page 6	version 2.05
All specifications are liable to change without notice. E&OE		ENGLISH