When All Hookups are Complete

GAS COOKTOP INSTALLATION INSTRUCTIONS

4. Adjust the “LOW” setting for regular

surface burner valves (Figure 10)

a. Push in and turn control to LITE until burner ignites.

b.Quickly turn knob to LOWEST POSITION.

c.If burner goes out, reset control to OFF.

d.Remove the surface burner control knob.

e.Insert a thin-bladed screwdriver into the hollow valve stem and engage the slotted screw inside. Flame size can be increased or decreased with the turn of the screw. Turn counterclockwise to increase flame size. Turn clockwise to decrease flame size. Adjust flame until you can quickly turn knob from LITE to

LOWEST POSITION without extinguishing the flame. Flame should be as small as possible without going out.

Clockwise

Counterclockwise

Hollow

Valve

Stem B

Regular

Burner

ValveDual

Burner

Valve

Figure 10

Note: Air mixture adjustment is not required on surface burners.

5. Adjust the "LOW" setting of the dual burner surface valve (Figure 10) (some models):

Note: On the dual valve the low setting of each portion should be adjusted individually.

a. Push in and turn knob to LITE then continue to turn until only the inner portion of the dual burner stays on.

b. Quickly turn knob to LOWEST POSITION. c. If burner goes out, reset control to OFF. d. Remove the surface burner control knob. e. The inner portion of the dual burner flame

size can be increased or decreased with the turn of the screw B. Use screw A to adjust the low flame size of the outer portion of the dual burner. Turn the screw counterclockwise to increase flame size. Turn the screw clockwise to decrease flame size. Adjust flame until you can quickly turn knob from HIGH to LOWEST POSITION without extinguishing the flame. Flame should be as small as possible without going out.

Note: Air mixture adjustment is not required on surface burners.

Make sure all controls are left in the OFF position.

Make sure the flow of combustion and ventilation air to the cooktop is unobstructed.

Model and Serial Number Location

The serial plate is located on the underside of the cooktop.

When ordering parts for or making inquires about your range, always be sure to include the model and serial numbers and a lot number or letter from the serial plate of your cooktop.

Your serial plate also tells you the rating of the burners, the type of fuel and the pressure the cooktop was adjusted for when it left the factory.

Before You Call for Service

Read the Before You Call for Service Checklist and operating instructions in your Use and Care Guide. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance.

Refer to the warranty in your Use and Care Guide for our service phone number and address. Please call or write if you have inquiries about your product and/or need to order parts.

FPGC3087MS specifications

The Frigidaire FPGC3087MS is a versatile and efficient built-in gas cooktop designed to elevate your cooking experience. With its sleek stainless steel finish, this cooktop not only adds a modern aesthetic to your kitchen but also delivers outstanding performance.

One of the standout features of the FPGC3087MS is its four powerful burners, which provide a range of cooking options. The burners vary in size and capacity, including a high-output 18,000 BTU burner that allows for rapid boiling, perfect for quickly preparing pasta or searing meats. Additionally, the 5,000 BTU simmer burner is ideal for delicate tasks such as melting chocolate or simmering sauces, ensuring precision and control over low-temperature cooking.

Safety is also a priority with the Frigidaire FPGC3087MS. It comes equipped with a flame failure safety device, which automatically shuts off the gas flow if the flame goes out. This feature gives users peace of mind, especially in busy kitchen environments. Moreover, the continuous grates provide a stable cooking surface that allows for effortless movement of pots and pans across burners without the need to lift or reposition them.

The cooktop features a sleek and easy-to-clean design, highlighted by its stainless steel surface, which resists fingerprints and smudges. The removable grates and burner caps can also be washed easily, making maintenance a breeze.

Furthermore, the FPGC3087MS utilizes a precise control system with ergonomic knobs that allow for easy adjustments to flame levels. This level of control facilitates cooking techniques ranging from boiling to frying, giving home chefs the versatility to experiment with various recipes.

In addition, the sealed burners help contain spills, reducing the hassle of cleaning up after cooking. The cooktop's overall design promotes improved airflow, providing even heat distribution for consistent cooking results.

Overall, the Frigidaire FPGC3087MS is a top-tier choice for anyone looking to enhance their kitchen's functionality while enjoying modern design elements. Its combination of powerful burner options, safety features, ease of cleaning, and user-friendly controls make it an excellent addition to any culinary space. Whether you’re a novice cook or an experienced chef, this gas cooktop can help you create delicious meals with confidence and efficiency.