Frigidaire FPIC3095MS To Turn on one or more Cooking Zones, To Turn OFF the Cooking Zones

Page 10

SETTING COOKTOP CONTROLS

Setting Cooktop Controls Operating the Cooking Zones

The Induction cooktop has four or five Cooking Zones designed for cookware of various sizes. Be sure to place cookware that meets the minimum and maximum pan size requirements (see pages 7 & 8) for the Cooking Zone desired and is best for the amount of food being prepared. Place the cookware with the prepared food on the Cooking Zone BEFORE setting any of the Cooktop controls.

1.

Place the correct cookware containing prepared food

 

on the desired Cooking Zone.

 

 

 

 

 

 

 

 

 

 

 

 

2.

Touch the main

 

 

key pad for 2 seconds.

3.

Touch the

 

 

pad for the desired Cooking Zone.

 

 

 

 

 

 

 

 

 

 

 

 

4.

Set the desired power level using the

 

or

 

pads.

5.

 

 

 

 

 

When cooking is done, turn off the Cooking

Zone by

 

touching its

 

 

pad.

 

 

 

 

 

 

 

 

 

 

 

To Turn ON one or more Cooking Zones:

1.Place the prepared food using the correct type and size cookware on the desired Cooking Zone. Be sure to center the cookware on Cooking Zone completely covering the minimum ring marked on the Zone surface.

2.Touch and hold the key pad for 2 seconds (or until a long beep sounds). The Power LED located above the key pad will turn ON. NOTE: If no other key pad is touched within 10 seconds the request to Power ON the cooktop will clear.

3.To start a Cooking Zones lightly touch the key pad for the Cooking Zones needed. A beep will sound and the chosen Cooking Zone power level display will show “-” indicating no power level for the Zone has been set yet. NOTE: If no other key pad is touched within 10 seconds the request to Power ON the Cooktop Zone will clear.

4.Set the desired power level for the Cooking Zone by

touching either the or key pad. If the key pad is touched the Cooking Zone will start at a “Power Boost” maximum power level (the Cooking Zone display will indicate “P” and the control will beep once). If the key pad is touched once the Cooking Zone will start at low (the Cooking Zone display will show “1 ” and the control will beep once). PLEASE NOTE: If the cookware requirements for the Cooking Zone (See pages 7 & 8) are not met the sensors will detect a problem and the display will flash with the power level in the affected

Cooking Zone display. Any problems must be corrected before proceeding.

NOTE: Touch once, or repeatedly touch the or key pads to adjust or scroll through power levels at any time during the cooking process (To scroll through the power levels touch and hold the or key pads until the power level desired is reached). Once the Cooking Zone power level has been set the food will begin to heat at that level until the power level is manually changed or power sharing is activated.

To Turn OFF the Cooking Zones:

1.Once cooking is complete, touch the key pad to turn the Cooking Zone OFF.

2.The corresponding Cooking Zone ON/OFF LED located

above the key pad will turn OFF. A beep will sound and the chosen Cooking Zone power level display will turn off. If no other key pads are touched the Cooking Zone will shut OFF.

3.When any Cooking Zone is OFF, the corresponding Cooking Zone display may show H if the Cooking Zone temperature is HOT. The display will continue to show H, even if the Cooktop is switched OFF the display will continue to indicate H as long as the cooking zone remains HOT.

The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. But the glass surface may be HOT from residual heat transferred from the cookware and burns may occur.

Important operating notes:

•Fluids spilled or objects lying on the controls area of the cooktop may cause the cooktop to display an error code and turn OFF while cooking. Clean the spills or remove the objects from the cooktop. The zone that was affected has to be touched twice on the ON/OFF key. Once to clear the stuck key and once to turn the zone back on.

•Be sure the cooktop vent holes are NOT blocked. If the vent holes are blocked the cooktop internal sensor may shut OFF the cooktop to avoid overheating the appliance.

•If the cookware or pan is moved from the center of any active Cooking Zone for any reason, a sensor will detect the situation and the cookware will no longer heat. The affected

Cooking Zone display will flash the power level set for the

Cooking Zone. The Cooking Zone will remember the power level setting for up to 3 minutes before the Cooking Zone will automatically shut OFF.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Use &Care Serial Plate Location Welcome & CongratulationsProduct Registration  NoteImportant Safety Instructions DefinitionsDo not Touch Surface Units or Areas Near Important Safety Instructions for Using Your CooktopNever use your appliance for warming or heating the room Do Not Use Decorative Surface Element CoversCooktop Features Read these instructions carefully before using the cooktopQuick Instructions to SET Your Cooktop Controls Use the Correct Cookware Type Before Using the CooktopInduction Cooktop Characteristics Selecting Surface Cooking CookwareCookware Recommendations Use the Correct Cookware SizeSetting Cooktop Controls To Turn OFF the Cooking Zones To Turn on one or more Cooking ZonesImportant operating notes Locking the Controls Feature Keep Warm FeatureMinute Timer Feature Power SharingOperational Noises How to Clean Care & CleaningCleaning Various Parts of Your Cooktop Ceramic Glass Cooktop Cleaning & MaintenanceFor light to moderate soil Cleaning Recommendations for the Ceramic Glass CooktopCare and Cleaning of Stainless Steel For heavy, burned on soilPossible CAUSE/SOLUTION Before YOU Call Solutions to Common ProblemsOccurrence Error Codes Display Message Occurrence Possible CAUSE/SOLUTIONPage Exclusions This warranty does not cover the following Major Appliance WarrantyDisclaimer of Implies Warranties Limitation of Remedies

FPIC3695MS, FPIC3095MS, FGIC3067MB, FGIC3667MB specifications

Frigidaire, a trusted name in kitchen appliances, offers a range of induction cooktops that blend innovative technology with modern design. Four standout models in their lineup are the FGIC3667MB, FPIC3095MS, FGIC3067MB, and FPIC3695MS. Each model brings unique features aimed at enhancing cooking efficiency and user experience.

The FGIC3667MB is a 36-inch induction cooktop that boasts a sleek black finish, giving it a contemporary flair. With five induction elements, it is designed to offer exceptional versatility for various pot and pan sizes. The cooktop features an integrated timer, allowing users to ensure precision in their cooking. Additionally, it includes a powerful boost feature that provides maximum heat for rapid boiling, making it ideal for busy kitchens.

Next up is the FPIC3095MS, a 30-inch model designed for both performance and style. Its stainless steel finish complements modern kitchen aesthetics, while the five cooking zones deliver rapid heat. A notable feature of this model is the_sync feature, which allows users to connect two elements for even heat distribution when using larger cookware. The easy-to-use touch controls add convenience, making adjustments straightforward and hassle-free.

The FGIC3067MB is another impressive 30-inch induction cooktop with a black mirror finish that adds a touch of elegance to any kitchen. This model also features a powerful booster for quick temperature adjustments and a hot surface indicator that ensures safety by notifying users when the cooktop is still too hot to touch. Its compact design makes it suitable for smaller kitchens without sacrificing cooking capacity.

Lastly, the FPIC3695MS offers a generous 36-inch cooking surface with the unique feature of a removable magnetic control panel. This innovative design makes it incredibly easy to clean while ensuring that controls are always within reach. Similar to other models, it has five induction elements, including a powerful booster function, ensuring rapid heating and even cooking. It also includes an automatic shut-off feature, which enhances safety by turning off the burner if no cookware is detected.

In summary, the Frigidaire FGIC3667MB, FPIC3095MS, FGIC3067MB, and FPIC3695MS induction cooktops emphasize modern design while incorporating advanced cooking technologies. With features such as induction cooking efficiency, easy control interfaces, safety indicators, and versatile cooking options, these models are ideal for anyone looking to elevate their culinary experience. Frigidaire’s commitment to quality and innovation continues to shine through these exceptional cooktops.
Top Page Image Contents