Canning Tips & Information

Canning can generate large amounts of steam. Use extreme caution to prevent burns. Always raise the lid to vent steam away from you.

1.Use tested recipes and follow instructions carefully. Check with your local Cooperative Agricultural Extension Service or a manufacturer of glass jars for the latest canning information.

2.Use flat-bottomed canners only. Heat is spread more evenly when the bottom surface is flat.

3.Center canner on the burner grate.

4.Start with hot water and a high heat setting to reduce the time it takes to bring the water to a boil; then reduce the heat setting as low as possible to maintain a constant boil.

5.It is best to can small amounts and light loads.

Prevent damage to cooktop and burner grates:

1.Do not use water bath or pressure canners that extend more than one inch beyond the edge of the burner grate.

2.Do not leave water bath or pressure canners on high heat for an extended amount of time.

3.Alternate surface units between each batch to allow the units and surrounding surfaces to cool down. Try to avoid canning on the same burner unit all day.

Safe canning requires that harmful micro-organisms are destroyed and the jars are sealed completely. When canning in a water bath canner, a gentle but steady boil must be maintained continuously for the required time.

Grounding Instructions

For personal safety, the cooktop must be properly grounded. For maximum safety, the power cord must be plugged into an electrical outlet that is correctly polarized and properly grounded.

DO NOT Operate the cooktop using a 2-prong adapter or an extension cord. If a 2-prong wall receptacle is the only available outlet, it is the personal responsibility of the consumer to have it replaced with a properly grounded 3-prong wall receptacle installed by a qualified electrician.

See the INSTALLATION INSTRUCTIONS packaged with this cooktop for complete installation and grounding instructions.

This appliance is equipped with a 3-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from this plug.

Grounding
type wall	Do not, under any
receptacle	circumstances, cut,
	remove, or bypass
	the grounding prong.

Power supply cord with 3-prong grounding plug

Avoid fire hazard or electrical shock. DO NOT use an adapter plug, an extension cord, or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death.

Liquefied Petroleum (Propane) Gas Conversion

This appliance can be used with Natural Gas and Propane Gas. It is shipped from the factory for use with natural gas.

If you wish to convert your cooktop for use with propane gas, use the instructions in the envelope attached, marked “FOR LP/PROPANE GAS CONVERSION”.

The conversion must be performed by a qualified service technician in accordance with the manufacturer's instructions and all codes and requirements of the authority having jurisdiction. Failure to follow instructions could result in serious injury or property damage. The qualified agency performing this work assumes responsibility for the conversion.

Severe shock, or damage to the cooktop, may occur if the cooktop is not installed by a qualified installer or electrician.

Any additions, changes or conversions required in order for this appliance to satisfactorily meet the application needs must be made by an authorized Sears Service Center, Distributor or Qualified Agency.

318200563 specifications

The Frigidaire 318200563 is a highly regarded range oven part designed to enhance cooking performance and reliability. This component, specifically a surface burner, is an essential piece in many Frigidaire gas ranges, facilitating efficient heat distribution and temperature control for various cooking needs.

One of the standout features of the Frigidaire 318200563 is its robust construction, which ensures durability and longevity. Made from high-quality materials, this burner is designed to withstand the rigors of daily cooking while maintaining consistent performance. This durability translates into fewer replacements over time, making it a cost-effective investment for both home cooks and professional kitchens alike.

The technological design of the Frigidaire 318200563 focuses on optimizing heat output. It features precise engineering that allows for quick heating, ideal for searing meats or boiling water rapidly. The burner’s shape and size have been carefully crafted to ensure an even distribution of heat across pots and pans, eliminating cold spots and ensuring that food cooks evenly.

Another highlight of this surface burner is the ease of installation. The Frigidaire 318200563 is designed to fit a variety of Frigidaire models seamlessly. Whether replacing a worn-out burner or upgrading to enhance cooking capabilities, the installation process is straightforward, typically requiring no specialized tools. This feature saves both time and hassle, enabling users to get back to cooking quickly.

In addition to performance, safety considerations are integrated into the design of the Frigidaire 318200563 burner. It incorporates features that help prevent gas leaks, providing peace of mind during use. This safety aspect is particularly important in busy kitchens where multiple tasks are handled simultaneously.

Overall, the Frigidaire 318200563 combines durability, efficient heat distribution, and ease of installment, making it an essential component for any Frigidaire gas range. Whether you're an avid home cook or a culinary professional, this burner enhances your cooking experience by providing reliable and consistent performance. Investing in the Frigidaire 318200563 means investing in quality and efficiency, ensuring that meals are prepared to perfection every time.