Placement of Burner Grates, Surface | Frigidaire 318200563 specs

Placement of Burner Grates

Place grate over burner pans. Make sure that the groove under grate fits over the raised lip of the burner pan. The rounded corners of the

grates should be placed toward the front of the cooktop for the front Grate burners and the rear of the cooktop for the back burners.

Setting Surface Controls

Your cooktop may be equipped with any combination of the following burners:

Simmer Burner; this burner is best used for simmering delicate sauces, etc.

Standard Burner; can be used for most all surface cooking needs.

	Large Burner; the larger burner is best used when bringing large quantities	Burnerr pPan Lid
		lip
	of liquid to temperature and when preparing larger quantities of food.	lip
		Cooktop
		Cooktop
		Surface
		Surface

Regardless of size, always select a utensil that is suitable for the amount and type of food being prepared. Select a burner and flame size

appropriate to the pan. Never allow flames to extend beyond the outer edge of the pan.

Your cooktop is also equipped with 270° rotation valves. These valves provide enhanced control of the burner flame. Each burner lights automatically from an electric ignitor when its control knob is turned to the LITE position.

Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the cooktop when it is in use. These items could melt or ignite. Potholders, towels or wood spoons could catch fire if placed too close to a flame.

NOTE: White glass can appear green when it is hot, it is normal, and it will come back to white when it cools down.

To operate the surface burner:

1. Place cooking utensil on burner.

2. Push in and turn the Surface Control knob to LITE. Note: All electronic ignitors will click at the same time. However, only the burner you are turning on will ignite.

3. Visually check that the burner has lit.

4. Push in and turn the control knob to the desired flame size. The control knobs do not have to be set at a particular mark. Use the guides and adjust the flame as needed. DO NOT cook with the Surface Control knob in the LITE position. (The electronic ignitor will continue to click if left in the LITE position, causing premature wear.)

In the event of an electrical power outage, the surface burners can be lit manually. To light a surface burner, hold a lit match to the burner head, then slowly turn the Surface Control knob to LITE. Use caution when lighting surface burners manually.

Electric Ignition Models

In event of an electrical power outage, the surface burners can be lit manually. To light a surface burner, hold a lit match to the burner head, then slowly turn the surface control knob to LITE. Use caution when lighting surface burners manually.

Surface burner in use when an electrical power failure occurs will continue to operate normally.

Do not operate the burner for an extended period of time without cookware on the grate. The finish on

the grate may chip without cookware to absorb the heat.

318200563 specifications

The Frigidaire 318200563 is a highly regarded range oven part designed to enhance cooking performance and reliability. This component, specifically a surface burner, is an essential piece in many Frigidaire gas ranges, facilitating efficient heat distribution and temperature control for various cooking needs.

One of the standout features of the Frigidaire 318200563 is its robust construction, which ensures durability and longevity. Made from high-quality materials, this burner is designed to withstand the rigors of daily cooking while maintaining consistent performance. This durability translates into fewer replacements over time, making it a cost-effective investment for both home cooks and professional kitchens alike.

The technological design of the Frigidaire 318200563 focuses on optimizing heat output. It features precise engineering that allows for quick heating, ideal for searing meats or boiling water rapidly. The burner’s shape and size have been carefully crafted to ensure an even distribution of heat across pots and pans, eliminating cold spots and ensuring that food cooks evenly.

Another highlight of this surface burner is the ease of installation. The Frigidaire 318200563 is designed to fit a variety of Frigidaire models seamlessly. Whether replacing a worn-out burner or upgrading to enhance cooking capabilities, the installation process is straightforward, typically requiring no specialized tools. This feature saves both time and hassle, enabling users to get back to cooking quickly.

In addition to performance, safety considerations are integrated into the design of the Frigidaire 318200563 burner. It incorporates features that help prevent gas leaks, providing peace of mind during use. This safety aspect is particularly important in busy kitchens where multiple tasks are handled simultaneously.

Overall, the Frigidaire 318200563 combines durability, efficient heat distribution, and ease of installment, making it an essential component for any Frigidaire gas range. Whether you're an avid home cook or a culinary professional, this burner enhances your cooking experience by providing reliable and consistent performance. Investing in the Frigidaire 318200563 means investing in quality and efficiency, ensuring that meals are prepared to perfection every time.