Operating Instructions
Very Important
Information Read Before
Operating Your Dishwasher!
NormalOperating
Sounds
This dishwasher does not sound like most
Your Precision Wash Systerr_ dishwasher uses energy efficient motors for the wash and drain portions of the cycle you select. Each cycle has a series of water fills and drains for washing and rinsing dishes. As
each cycle begins, you
The next sound you will hear is the
splashing water as it enters the tub. Then the lower arm rotates and circulates water. This
is followed by a pause and a slightly different sound as the middle arm sprays water. If you
listen closely, you will hear the change in sound as the wash action switches from one
arm to the other.
PLEASE BE ADVISED: If you compare this dishwasher to previous models, you
may be surprised at what you DON'T hear!
Getting Started
1.Load dishwasher (See Preparing and Loading Dishes).
Appearance may vary from your model.
2.Add detergent (See Dishwasher Dispenser
&Detergents).
3.Add rinse aid, if needed (See Rinse Aid).
4.Turn dial clockwise to select cycle (See Cycle Chart) or number of hours for delay start.
5.Select desired energy OPTIONS (See Energy Options). The indicator will show red when selected.
6.If using DELAY START, go to step number 9.
7.For instructions on connecting the portable dishwasher, see "Connecting and
Disconnecting the Portable/Convertible Dishwasher"
8.Run hot water faucet nearest dishwasher until water is hot. Turn water off.
9.To start, close door to latch.
Delay Start
Allows you to delay starting the POTS & PANS cycle.
•Turn dial to select number of hours.
•Select
•Close door to latch. The DELAY START light (available select models) will come on.
Plate Warmer (availableselect
models)
For warming dishes and serving plates before serving hot foods:
•Load clean plates and dishes to be warmed.
•Turn dial to PLATE WARMER.
•Select HEAT DRY ON option.