Troubleshooting Guide

RX-4109(A) 2006.6.21 08:26 AM 페이지 16

If a fault occurs, run through the table below before taking your receiver for repair.

If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult with your dealer. Under no circumstances should you repair the receiver yourself as this could invalidate the warranty.

PROBLEM	POSSIBLE CAUSE	REMEDY
No power	• The AC input cord is disconnected.	• Connect the cord securely.
	• Poor connection at AC wall outlet or the	• Check the outlet using a lamp or another
	outlet is inactive.	appliance.

No sound	• The speaker cords are disconnected.	• Check the speaker connections.
	• The volume is adjusted too low.	• Adjust the volume.
	• The MUTE button on the remote control is	• Press the MUTE button to cancel the
	pressed to ON.	muting effect.
	• Speakers are not switched on.	• Press the SPEAKER A or B button to ON.
	• Incorrect selection of the input source.	• Select the desired input source correctly.
	• Incorrect connections between the	• Make connections correctly.
	components.

Stations cannot be	• No antenna is connected.	• Connect an antenna.
received	• The desired station frequency is not tuned	• Tune in the desired station frequency.
	in.
	• The antenna is in wrong position.	• Move the antenna and retry tuning.

Preset stations cannot be	• An incorrect station frequency has been	• Memorize the correct station frequency.
received	memorized.
	• The memorized stations are cleared.	• Memorize the stations again.

Poor FM reception	• No antenna is connected.	• Connect an antenna.
	• The antenna is not positioned for the best	• Change the position of the antenna.
	reception.

Continuous hissing noise	• Weak signals.	• Change the position of the antenna.
during FM reception,		• Install an outdoor antenna.
especially when a stereo
broadcast is received.

Continuous or intermittent	• Noise is caused by motors, fluorescent	• Keep the receiver away from noise
hissing noise during AM	lamps or lightning, etc.	sources.
reception, especially at		• Install an outdoor AM antenna.
night.

No recording	• Incorrect selection between the	• Make connections correctly.
	components.
	• Incorrect operation of each component for	• Operate each component correctly.
	playback and recording.

Remote control unit does	• Batteries are not loaded or exhausted.	• Replace the batteries.
not operate.	• The remote sensor is obstructed.	• Remove the obstacle.

RX-4109 specifications

The Sherwood RX-4109 is a well-regarded stereo receiver that caters to both audiophiles and casual listeners alike. Known for its blend of vintage aesthetics and modern features, this receiver packs a punch in terms of power and versatility, making it an ideal choice for anyone looking to enhance their home audio experience.

One of the standout features of the RX-4109 is its robust power output. It delivers a solid 100 watts per channel at 8 ohms, providing ample power to drive even the most demanding speakers. This significant wattage ensures that users can enjoy clear and distortion-free sound at any volume level, making it perfect for both quiet listening and lively gatherings.

The RX-4109 is equipped with a range of inputs and outputs, allowing for versatile connectivity. It includes multiple analog inputs for connecting devices like CD players, turntables, and more. Additionally, the receiver is outfitted with a dedicated phono input, an essential feature for vinyl enthusiasts. The presence of a headphone jack also enables private listening, enhancing its usability for late-night sessions.

The receiver incorporates several advanced technologies to improve sound quality. Its built-in digital signal processor (DSP) enhances audio clarity, providing a richer listening experience. The inclusion of an AM/FM tuner with 30 presets allows users to effortlessly access their favorite radio stations. This feature is complemented by a high-performance antenna, ensuring optimal reception quality.

A user-friendly interface is another hallmark of the RX-4109. The front panel is intuitively designed, featuring a clear display and straightforward controls, making it easy for users to navigate settings and adjust sound parameters. The remote control adds to the convenience, allowing users to operate the receiver from a distance.

In terms of design, the Sherwood RX-4109 boasts a classic look that appeals to traditionalists. The brushed aluminum front panel and rotary knobs give it an elegant touch, fitting seamlessly into any home audio setup.

In summary, the Sherwood RX-4109 stands out as a versatile and powerful stereo receiver, delivering high-quality sound and a range of connectivity options. Its combination of robust performance, user-friendly design, and essential features make it a worthy addition to any audio setup, whether for music, movies, or radio. The RX-4109 exemplifies Sherwood's commitment to quality sound and reliability, providing an excellent listening experience for enthusiasts and casual users alike.

Troubleshooting Guide

PROBLEM

POSSIBLE CAUSE

REMEDY

RX-4109 specifications