Sherwood RX-4109 manual Introduction, Read this Before Operating Your Unit

Page 3

RX-4109(A) 2006.6.21 08:25 AM 페이지 2

Introduction

READ THIS BEFORE OPERATING YOUR UNIT

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Caution regarding installation

Note : For heat dispersal, do not install this unit in a confined space such as a bookcase or similar enclosure.

Do not block ventilation openings or stack other equipment on the top.

Note to CATV System Installer :

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FOR YOUR SAFETY

U.S.A

CANADA

120 V

Units shipped to the U.S.A and CANADA are designed for operation on 120 V AC only. Safety precaution with use of a polarized AC plug.

However, some products may be supplied with a nonpolarized plug.

CAUTION : To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION : Pour éviter chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’ au fond.

CAUTION

•Leave a space around the unit for sufficient ventilation.

•Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct sunlight or heating equipment.

•Keep the unit free from moisture, water, and dust.

•Do not let foreign objects in the unit.

•The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

•No naked flame sources, such as lighted candles, should be placed on the unit.

•Please be care the environmental aspects of battery disposal.

•The unit shall not be exposed to dripping or splashing for use.

•No objects filled with liquids, such as vases, shall be placed on the unit.

•Do not let insecticides, benzene, and thinner come in contact with the set.

•Never disassemble or modify the unit in any way.

■Notes on the AC power cord and the wall outlet.

•The unit is not disconnected from the AC power source(mains) as long as it is connected to the wall outlet, even if the unit has been turned off.

•When disconnecting the power cord from the wall outlet, always pull the plug, not the power cord.

•Disconnect the plug from the wall outlet when not using the unit for long periods of time.

•The wall outlet shall be installed near the unit and shall be easily accessible.

2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents RX-4109A 2006.6.21 0825 AM 페이지 RX-4109 Read this Before Operating Your Unit IntroductionSafety Instructions Contents System Connections Connecting ANTENNAsAC Input Cord Front Panel Remote Controls Fluorescent Display Front Panel & Remote ControlsFM Mode Button Power ButtonStandby Indicator Speaker A, B Selector Buttons TUNING/PRESET Mode ButtonRemote Control Operation Range Loading Batteries Remove the coverLoad two batteries matching the polarity Listening to a Program Source Turn the power onSwitch the desired speakers on OperationsAdjusting the tonebass and treble Adjusting the sound volume balance Auto tuningListening to Radio Broadcasts Repeat the above steps 1 to 3 to memorize other stations Manual tuningPresetting radio stations Memory Backup FunctionSelect the desired preset number Tuning to preset stationsOther Functions RecordingProblem Possible Cause Remedy Troubleshooting GuideAmplifier Section Specifications
Related manuals
Manual 23 pages 61.33 Kb

RX-4109 specifications

The Sherwood RX-4109 is a well-regarded stereo receiver that caters to both audiophiles and casual listeners alike. Known for its blend of vintage aesthetics and modern features, this receiver packs a punch in terms of power and versatility, making it an ideal choice for anyone looking to enhance their home audio experience.

One of the standout features of the RX-4109 is its robust power output. It delivers a solid 100 watts per channel at 8 ohms, providing ample power to drive even the most demanding speakers. This significant wattage ensures that users can enjoy clear and distortion-free sound at any volume level, making it perfect for both quiet listening and lively gatherings.

The RX-4109 is equipped with a range of inputs and outputs, allowing for versatile connectivity. It includes multiple analog inputs for connecting devices like CD players, turntables, and more. Additionally, the receiver is outfitted with a dedicated phono input, an essential feature for vinyl enthusiasts. The presence of a headphone jack also enables private listening, enhancing its usability for late-night sessions.

The receiver incorporates several advanced technologies to improve sound quality. Its built-in digital signal processor (DSP) enhances audio clarity, providing a richer listening experience. The inclusion of an AM/FM tuner with 30 presets allows users to effortlessly access their favorite radio stations. This feature is complemented by a high-performance antenna, ensuring optimal reception quality.

A user-friendly interface is another hallmark of the RX-4109. The front panel is intuitively designed, featuring a clear display and straightforward controls, making it easy for users to navigate settings and adjust sound parameters. The remote control adds to the convenience, allowing users to operate the receiver from a distance.

In terms of design, the Sherwood RX-4109 boasts a classic look that appeals to traditionalists. The brushed aluminum front panel and rotary knobs give it an elegant touch, fitting seamlessly into any home audio setup.

In summary, the Sherwood RX-4109 stands out as a versatile and powerful stereo receiver, delivering high-quality sound and a range of connectivity options. Its combination of robust performance, user-friendly design, and essential features make it a worthy addition to any audio setup, whether for music, movies, or radio. The RX-4109 exemplifies Sherwood's commitment to quality sound and reliability, providing an excellent listening experience for enthusiasts and casual users alike.
Top Page Image Contents