Electrolux 318201761E30GF74GPS, E36GF76GPS, E36GF75GPS manual Grounding, Connect Range to GAS Supply

Page 17

Installation 17

GROUNDING

1The range is equipped with a three-prong power cord (grounding plug which mates with a standard three-prong grounding wall receptacle to minimize the possibility of electrical shock hazard from the range).

2Where a standard two-prong wall receptacle is encountered, it is the responsibility and obligation of the customer to have it replaced with a properly grounded three- prong wall receptacle. Do not cut or remove the grounding prong from the power cord.

CONNECT RANGE TO GAS SUPPLY

1Turn off gas.

2Install a male 1/2” flare union adapter to 1/2” NPT internal thread of regulator inlet.

3Connect flexible gas line connector to end union and regulator inlet.

4Install the male flare union adapter on the manual shut-off valve, taking care to support the shut-off valve . Do not allow the valve to move or turn.

5Position the range into the cabinet to allow connection of flexible connector at the shut-off valve.

6When all connections have been made, make sure all range controls are in the “OFF” position and turn on main gas supply valve.

7Use a leak detector at all joints and connections to check for leaks in the system. Do not use a flame to check for gas leaks.

The appliance must be isolated from the building’s gas supply piping system by closing it’s individual manual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5kPa).

NOTE

The gas pressure regulator is preset at the factory for natural gas to use with the appliance. To convert the range to LP gas, see instructions supplied in the LP conversion package.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents E30GF74GPS E36GF75GPS E36GF76GPS Questions Read and Save These InstructionsTable of Contents Important Safety Instructions Safety Precautions Safety GAS and Electric Requirement Table Verify Package ContentsElectrical Power Supply Requirements Locations GAS and Electrical ROUGH-INCabinet and Countertop Preparation E30GF74GPS, E36GF75GPS E36GF76GPS General DimensionsGeneral Dimensions WOOD/COMPOSITE Overlay Installation Installing the ANTI-TIP Bracket Installing the 36 Range Optional Backguard Removing the Oven Door RE-INSTALLING the Oven DoorConnect Range to GAS Supply GroundingMake sure the anti-tip bracket is installed as directed on Installing the RangeVerifying the Operation OperationRefer to the USE and Care Manual for Detailed Instructions To Ensure Proper and Safe OperationConversion To LP Gas Instructions for Converting Range from Natural GAS to LP GAS Convert the Pressure Regulator HOW to Convert the Range for USE with LP/PROPANE GASConvert TOP Burner for USE with LP/PROPANE GAS Remove the toe kick panel Convert Oven Burner Orifice to LP/PROPANE GASConvert Broil Burner Orifice for LP Propane GAS 16.500 BTU Convert Griddle Orifice for LP/PROPANE GAS 18,500 BTU Remove control knobs, bezel and control panel Convert GAS Valves for LP/PROPANE GASChecking for Manifold Gas Pressure Reconnect GAS and Electrical Supply to RangeAIR Shutter Oven Burner Installation of NEW LP/PROPANE RATING/SERIAL Plate

318201761E30GF74GPS, E36GF75GPS, E36GF76GPS specifications

Electrolux has made a significant mark in the home appliance sector, particularly with its advanced range of refrigerators designed for convenience, efficiency, and modern living. Among its notable models, the Electrolux 318201761E30GF74GPS, E36GF76GPS, and E36GF75GPS stand out due to their cutting-edge features and innovative technologies.

The Electrolux 318201761E30GF74GPS is designed with a focus on maximizing freshness and minimizing wastage. It includes advanced cooling technologies such as Dual Cooling, which uses independent cooling systems for the refrigerator and freezer compartments. This setup not only preserves food more effectively but also prevents the mingling of odors, ensuring that your food stays fresher for longer.

On the other hand, the E36GF76GPS and E36GF75GPS models boast a spacious interior, optimally designed for organizing groceries. Their custom features include adjustable shelving and ample door storage, allowing users to tailor the space according to their needs. The interior lighting is LED-based, providing bright illumination while utilizing less energy, which aligns with Electrolux's commitment to sustainability.

Another standout feature across these models is the Smart Refrigeration technology that integrates with mobile applications. This feature allows users to monitor and adjust temperature settings remotely, receive alerts regarding door status, and even track food inventories. This level of connectivity integrates seamlessly with today’s smart home setups, providing convenience at your fingertips.

Energy efficiency is a hallmark of Electrolux appliances. These models feature high energy efficiency ratings, which not only help in reducing electricity bills but also contribute to a lower environmental impact. The use of high-quality insulation materials ensures that the cooling system operates effectively while consuming minimal energy.

In terms of design, the sleek stainless steel finish adds a touch of elegance to any kitchen decor. The fingerprint-resistant coating ensures that the exterior remains clean and smudge-free, minimizing maintenance hassle.

In conclusion, the Electrolux 318201761E30GF74GPS, E36GF76GPS, and E36GF75GPS refrigerators are remarkable examples of modern appliance technology. With sophisticated cooling systems, user-friendly smart features, energy efficiency, and timeless design, these models exemplify Electrolux’s commitment to enhancing everyday living through innovation and quality.
Top Page Image Contents