Electrolux E36GF76GPS, E36GF75GPS, 318201761E30GF74GPS manual Installing the Range

Page 18

18Installation

CONNECT RANGE TO GAS SUPPLY

WARNING

Do not apply excessive pressure when tightening gas connections and fittings.

Do not use teflon tape or plumber’s putty on gas flex line connections.

Turn all control valves to the “OFF” position. Turn on gas supply and check all lines and connections with leak detector, such as soap and water solution. Do not use flame to check for leaks. After verifying that there are no gas leaks, turn off the gas supply to the range by turning the gas shut-off valve to the “OFF” position.

For LP installations, the LP gas tank must have its own high pressure regulator. This is in addition to the pressure regulator provided with the range.

The maximum gas supply pressure to the regulator must never exceed 1/2 pound per square

INSTALLING THE RANGE

WARNING

The 30” and 36” ranges require an Anti-Tip device. Before installing the range, you must locate and secure the Anti-Tip bracket to the floor.

Measure from the floor to the countertop and adjust the leveling legs as required to position the top frame at the desired height, based on the cabinet and countertop installation. Carefully slide the range into position in the cutout.

Make sure the anti-tip bracket is installed as directed on page 14.

1.Slide range forward.

2.Make sure the anti-tip bracket is securely attached to the wall behind the range.

3.Safely slide the range slightly and move back against wall, making sure the pin slides under bracket.

Installing the burner components

Remove the burner bases, burner heads, burner caps, and porcelain grates from their shipping packages. Place each burner onto its corresponding burner base, being certain that the burners align with the ignitor correctly. Set each burner cap on top of its corresponding burner head. Place each grate onto the top frame.

WARNING

Never attempt to operate the cooktop section of the range with any of the burner caps or grates removed.

Image 18
Contents E30GF74GPS E36GF75GPS E36GF76GPS Read and Save These Instructions QuestionsTable of Contents Important Safety Instructions Safety Precautions Safety Verify Package Contents GAS and Electric Requirement TableElectrical Power Supply Requirements GAS and Electrical ROUGH-IN LocationsCabinet and Countertop Preparation General Dimensions E30GF74GPS, E36GF75GPS E36GF76GPSGeneral Dimensions WOOD/COMPOSITE Overlay Installation Installing the ANTI-TIP Bracket Installing the 36 Range Optional Backguard RE-INSTALLING the Oven Door Removing the Oven DoorGrounding Connect Range to GAS SupplyInstalling the Range Make sure the anti-tip bracket is installed as directed onOperation Verifying the OperationTo Ensure Proper and Safe Operation Refer to the USE and Care Manual for Detailed InstructionsConversion To LP Gas Instructions for Converting Range from Natural GAS to LP GAS HOW to Convert the Range for USE with LP/PROPANE GAS Convert the Pressure RegulatorConvert TOP Burner for USE with LP/PROPANE GAS Convert Oven Burner Orifice to LP/PROPANE GAS Remove the toe kick panelConvert Broil Burner Orifice for LP Propane GAS 16.500 BTU Convert Griddle Orifice for LP/PROPANE GAS 18,500 BTU Convert GAS Valves for LP/PROPANE GAS Remove control knobs, bezel and control panelReconnect GAS and Electrical Supply to Range Checking for Manifold Gas PressureInstallation of NEW LP/PROPANE RATING/SERIAL Plate AIR Shutter Oven Burner

318201761E30GF74GPS, E36GF75GPS, E36GF76GPS specifications

Electrolux has made a significant mark in the home appliance sector, particularly with its advanced range of refrigerators designed for convenience, efficiency, and modern living. Among its notable models, the Electrolux 318201761E30GF74GPS, E36GF76GPS, and E36GF75GPS stand out due to their cutting-edge features and innovative technologies.

The Electrolux 318201761E30GF74GPS is designed with a focus on maximizing freshness and minimizing wastage. It includes advanced cooling technologies such as Dual Cooling, which uses independent cooling systems for the refrigerator and freezer compartments. This setup not only preserves food more effectively but also prevents the mingling of odors, ensuring that your food stays fresher for longer.

On the other hand, the E36GF76GPS and E36GF75GPS models boast a spacious interior, optimally designed for organizing groceries. Their custom features include adjustable shelving and ample door storage, allowing users to tailor the space according to their needs. The interior lighting is LED-based, providing bright illumination while utilizing less energy, which aligns with Electrolux's commitment to sustainability.

Another standout feature across these models is the Smart Refrigeration technology that integrates with mobile applications. This feature allows users to monitor and adjust temperature settings remotely, receive alerts regarding door status, and even track food inventories. This level of connectivity integrates seamlessly with today’s smart home setups, providing convenience at your fingertips.

Energy efficiency is a hallmark of Electrolux appliances. These models feature high energy efficiency ratings, which not only help in reducing electricity bills but also contribute to a lower environmental impact. The use of high-quality insulation materials ensures that the cooling system operates effectively while consuming minimal energy.

In terms of design, the sleek stainless steel finish adds a touch of elegance to any kitchen decor. The fingerprint-resistant coating ensures that the exterior remains clean and smudge-free, minimizing maintenance hassle.

In conclusion, the Electrolux 318201761E30GF74GPS, E36GF76GPS, and E36GF75GPS refrigerators are remarkable examples of modern appliance technology. With sophisticated cooling systems, user-friendly smart features, energy efficiency, and timeless design, these models exemplify Electrolux’s commitment to enhancing everyday living through innovation and quality.