Electrolux CSIG 223 W manual Connecting to Gas, Wall Face

Page 23

 

 

300 mm.

 

WALL FACE

 

 

 

 

 

BACK OF COOKER

480 mm.

mm.

 

ENGAGEMENT EDGE FOR

LEVELLING FEET

STABILITY BRACKET

 

100

 

 

 

 

 

 

BASE OF COOKER

 

 

 

A

 

PENCIL LINE ON THE FLOOR

 

 

 

 

245 mm.

 

 

PLAW VIEW OF THE COOKER

SIDE VIEW

FO 2434

OF THE COOKER

Fig. 2

Fitting the Stability Bracket (Not supplied)

If the cooker has to be installed with a flexible supply pipe, it is necessary that a stability device is fitted.

(See safety Requirements: Page 21).

If a stability bracket is to be fitted by the installer, these instructions should be read in conjunction with the leaflet packed with the stability bracket.

Place cooker in its intended position and level cooker.

Mark off 295mm (11 1/2") from the right hand side of the cooker as shown, this is the centre line of the bracket fixing.

Draw a line 100mm (4") from the front edge of the levelling feet (see Fig. 2) and remove cooker from its position. Mark off 480mm (19") back from this line on the centre line of the bracket to locate the front edge of the lower bracket.

Fix lower bracket (with two fixing holes) to the floor, then measure height from floor level to engagement edge on back of cooker, dimension 'A' of Fig. 2.

Assemble upper bracket to lower bracket so that underside of bracket is dimension 'A' +3mm (1/8") above floor level. Re-position cooker and check that top bracket engages into cooker back to a depth of 75mm (3"), as shown in Fig. 2.

Should the stability bracket currently installed not allow the cooker to stand correctly, ask the installer to replace it with the correct type.

Connecting to Gas

This cooker is designed to be installed with an appliance flexible connection. Connection is made to the RC 1/2 (1/2" B.S.P.) threaded entry pipe located just below the hotplate level on the rear right-hand side of the cooker. Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in the diagram. Take into account that it must be possible to pull the cooker forward sufficiently. The hose must not get caught on the stability bracket.

Note:

For certain types of gas bayonet connection used, it may not be possible for the appliance to be pushed fully back to the wall stops.

Important:

Flexible tubing MUST comply with BS.669 Current Edition.

 

600

450

 

130

 

FO 2435

Fig. 3

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Csig 223 W During Use Important Safety InformationChild Safety ServiceContents Description of the Cooker Control Panel Diameter OperationBurner Minimum Maximum Oven Function Control Knob Before the First Use of the CookerCookware Using the OvenFrom the oven when opening the oven door to Condensation and steamOven safety device Using the Gas ovenBefore using your oven Pastry Gas Oven Cooking ChartsPuddings Food Conventional Grill How to Use the GrillGrilling Burners Maintenance and CleaningHobTop Pan SupportsExternal cleaning Cleaning the OvenCleaning materials Oven Shelves Oven lamp replacementCleaning around the flame spreader Oven CavitySomething Not Working Symptom SolutionCustomer Care Service and Spare PartsGuarantee Conditions Parkinson Cowan Standard Guarantee ConditionsWales Channel IslandsScotland Northern IrelandSouth West MidlandsLondon & East Anglia South EastCsig 223 XW Instructions for the InstallerDimensions Oven HobPositioning the Cooker Important Safety RequirementsProvision forVentilation LocationInstallation Wall Face Connecting to GasThis Cooker Must be Earthed Electrical connectionsCommissioning ProcedurePressure Testing Method To Adjust the GAS RateMinimum level adjustment of gas oven burner

CSIG 223 W specifications

The Electrolux CSIG 223 W is a sophisticated combination of design and functionality, tailored to meet the demands of modern cooking enthusiasts. Featuring a stylish white exterior, this built-in electric oven is not only aesthetically pleasing but also rich in features that enhance culinary experiences.

One of the standout features of the CSIG 223 W is its advanced cooking technologies. It comes equipped with a multi-dimensional heat distribution system that ensures even cooking throughout the oven. This technology is particularly beneficial for baking, as it allows pastries and bread to rise perfectly without unexpected hot or cold spots.

Another impressive characteristic is the oven's versatile cooking modes, which include traditional bake, grill, defrost, and a specialized pizza setting. Each mode is designed to optimize cooking results for a variety of dishes, from succulent roasts to perfectly baked desserts. The oven also boasts a rapid preheat function, which significantly reduces waiting times, allowing you to get started with your recipes quickly.

The Electrolux CSIG 223 W is not just about performance, but also about convenience. The user-friendly control panel features intuitive knobs and digital displays, making it easy to select desired settings and monitor cooking progress. The oven offers a generous capacity, allowing you to cook multiple dishes at once, which is a great advantage for family meals or entertaining guests.

Cleaning is made simple with the CSIG 223 W thanks to its innovative enamel lining. This special coating prevents food residue from sticking to the surfaces, ensuring hassle-free cleaning after cooking. Additionally, the oven is designed with safety in mind, featuring a cool-touch door that minimizes the risk of burns, which is especially important in households with children.

In summary, the Electrolux CSIG 223 W is an excellent choice for those seeking an efficient, stylish, and technologically advanced oven. Its user-friendly features, innovative cooking technologies, and ease of maintenance make it a worthwhile investment for anyone passionate about cooking. Whether you're an experienced chef or a home cook, this oven can elevate your culinary creations and make cooking a pleasure.
Top Page Image Contents