Sherwood R-903R manual Connecting Audio Components

ENGLISH

2. CONNECTING DIGITAL INs and OUT

•The COAXIAL or the OPTICAL DIGITAL OUTs of the components that are connected to AUX and VIDEO 1~3 of this unit can be connected to these DIGITAL INs.

•If a digital recorder or other component with OPTICAL DIGI- TAL IN/OUT jacks is connected to the corresponding jacks of

this unit, you can playback and/or record the high quality						DIGITAL
						OUT
sound of CD’s, etc. without analog conversion or degradation.
• A digital input should be connected to the components such							Component such as
							an MD recorder, CD recorder
as a CD player, LD player, DVD player, etc. capable ofout-
	OPT	1	OPT	2	COAX	OPT	with OPTICAL DIGITAL IN
putting DTS Digital Surround, Dolby Digital or PCM format			DIGITAL IN
digital signals, etc.
								Component with
• For details, refer to the operating instructions of the compo-
								COAXIAL DIGITAL OUT
nent connected.
• When making the COAXIAL DIGITAL connection, be sure to								Component with
								OPTICAL DIGITAL OUT
use a 75Ω COAXIAL cord, not a conventional AUDIO cord.
• All of the commercially available optical fiber cords cannot be								Component with
used for the equipment. If there is an optical fiber cord which								OPTICAL DIGITAL OUT
cannot be connected to your equipment, consult your dealer
or nearest service organization.

3.CONNECTING AUDIO COMPONENTS

•The AUX jacks may be connected to an additional audio component such as a CD player, a tape deck, etc.

•The TAPE IN/OUT jacks can be connected to PLAY(OUT) / REC(IN) jacks of MD recorder.

AUX CD player, tape deck, etc.								L	AUDIO
								R	OUT
L							SUB W OOFER
								L	AUDIO
AUDIO
OUT								R	IN
R							TAPE	Tape deck, MD recorder, etc.
OUT	IN	IN	IN	IN	OUT	FRONT SURROUND SURR.BACK
VIDEO 1	VIDEO 2	VIDEO 3	AUX	TAPE		7CH DIRECT INPUT

4.CONNECTING VIDEO COMPONENTS

•This unit incorporates S-VIDEO and composite (normal) VIDEO jacks.

For your reference, the excellence in picture quality is as follows: “S-VIDEO” > composite(normal) “VIDEO”

•A signal input into the composite(normal) VIDEO IN jack will be output in the composite(normal) VIDEO OUT jacks and a signal input into the S-VIDEO IN jack will be output in the S-VIDEO OUT jacks and the composite (normal) MONITOR 1/2 VIDEO OUT jacks.

•The next picture is different from your real back pannel; just for helping your understnading. When you connecting the components on the real back pannel, refer to the sticker on top cover.

6