General Cleaning
Figure 1 |
Figure 2
To Remove and Replace Oven Bottom
To Remove Oven Bottom:
1.Remove the oven racks.
2.Remove the two
3.To lift out the bottom panel, place fingers in the slots in the bottom. Lift the rear of the panel up and back until it is clear of the lip at the front of the panel (Figure 2).
4.Lift the bottom up and out.
To Replace the Oven Bottom:
1.Place the oven bottom in the oven with the back raised about 6" or until you can insert the front of the oven bottom under the
2.Push the back of the oven bottom down fully into place on the metal flanges and insert the
General Cleaning
(continued)
The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.
To Remove and Replace Oven Door
To Remove Oven Door:
1.Open the door.
2.Remove screws located on the inside of the oven door near the hinges A (one on each side.)
3.Close the door to the
4.To clean oven door, follow the instructions provided in the cleaning chart under General Cleaning
To Replace Oven Door:
1.Be sure the hinge arms are in the
2.Hold the door at the sides near the top. Insert the hinge arms into slots at the bottom of the door.
3.Hinge arms must go into the range slots evenly. The hinge arms should be inserted into the bottom corners of the door as far as they can go.
4.If the door is not in line with the oven frame, remove it and repeat the above steps.
13