Frigidaire 316901301 manual Problem Solution, Care & Cleaning section

Page 33

 

Solutions to common problems • BEFORE YOU CALL

 

 

 

 

Problem

Solution

 

 

Poor baking results.

• Many factors affect baking results. Make sure the proper oven rack position is

 

used. Center food in the oven and space pans to allow air to circulate. Allow

 

the oven to preheat to the set temperature before placing food in the oven. Try

 

adjusting the recipe's recommended temperature or baking time. If you feel

 

the oven is too hot or cool, see “Adjusting Oven Temperature” section in this

 

Use & Care Guide.

 

 

Entire appliance does not operate.

• The time of day is not set. The time of day must first be set in order to

 

operate the oven. See “Setting the clock” in the Setting oven controls

 

section.

 

• Make sure cord/plug is plugged correctly into outlet.

 

• Service wiring is not complete. Contact your dealer, installing agent or

 

authorized service agent.

 

• Electrical power outage. Check house lights to be sure. Call your local

 

electric company for service.

 

 

Oven portion of appliance does not

• Be sure the oven controls are set properly for the desired cooking feature.

operate.

See Setting Oven Controls in this manual or see “Entire appliance does

 

not operate” in this checklist.

 

 

Surface burners do not ignite.

• Surface control knob was not completely turned to LITE. Push in & turn the

 

surface control knob to LITE until burner ignites and then turn control knob

 

to desired flame size.

 

• Burner ports are clogged. With the burner OFF, use a small-gauge wire or

 

needle to burner head slots and ignition ports. See “Cleaning the cooktop

 

and surface burners” in the Care & Cleaning section for additional

 

cleaning instructions.

 

• Range power cord is disconnected from outlet (electric ignition models

 

only). Be sure power cord is securely plugged into the power outlet.

 

• Electrical power outage (electric ignition models only). Burners can be lit

 

manually. See section on Setting Surface Controls.

 

 

Surface burner flame only part way

• Burner slots or ports are clogged. With the surface burner OFF, clean ports

around burner cap.

with a small-gauge wire or needle.

 

• Moisture is present after cleaning. Lightly fan the flame & allow burner to

 

operate until flame is full. Dry the surface burners thoroughly following the

 

instructions under “Cleaning the cooktop and surface burners” provided in

 

the Care & Cleaning section.

Surface burner flame is orange.

•Dust particles in main gas line. Allow the burner to operate a few minutes until flame turns blue. In coastal areas, a slightly orange flame is unavoidable due to salt air.

Self-cleaning cycle does not work.

•

Oven control not set properly. Follow instructions under Self-cleaning.

 

•

Self-Cleaning cycle was interrupted. Follow steps under "Stopping or

 

 

Interrupting a Self-cleaning cycle" under Self-cleaning.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Use&Care Product Record and Registration ContentsDefinitions Important Safety InstructionsImportant Safety Instructions Important Instructions for Using Your Cooktop Conversion to Liquefied Petroleum Gas Grounding InstructionsYour gas range features include Features AT a GlanceBefore Setting Oven Controls Effortless Oven Rack system To assemble the Effortless Oven Rack systemSpecial dark coating on the left and right rack Using proper cookware Before Setting Surface ControlsCorrect flame setting Incorrect flame setting Set proper burner flame sizeSetting Surface Controls Minimum & maximum control settings Feature Min. temp. /time Max. temp. /timeOven Control Functions Setting the clock Setting Oven ControlsSetting 12 or 24 hour display modes Changing oven temperature displaySetting oven lockout Setting a silent control panelSetting the minute timer Add a minute featureSetting bake Setting powerplus preheatSetting bake time When the set bake time runs outSetting Oven Controls Convect roast all models Convect bake all modelsSetting convect convection convert Broil Suggested broil settings table gas ovenTo set broil Step Press Close the oven doorSetting chicken nuggets feature Setting pizza featureSetting chicken nuggets feature cont’d Setting keep warmExample increase the oven temperature by 30F Step Press Adjusting the oven temperatureExample decrease the oven temperature by 30F Step Press Operating the oven lightMy Favorite Bake time and delay start pads If a bake time or delay start is neededSabbath Feature cont’d Keep Warm Drawer Keep warm drawer indicator lightOperating the keep warm drawer Operating keep warm drawerKeep warm drawer recommended settings Keep warm drawer recommended food settings FoodItem SettingArranging keep warm drawer rack positions SELF-CLEANING Self-cleaningAdhere to the following self-clean precautions Veryhot When the self-clean cycle has completedCleaning recommendations table Care & CleaningReplacing oven light Cleaning the cooktop and surface burnersRemoving and replacing the lift-off oven door To remove oven doorTo replace oven door Removing and replacing keep warm drawer To remove the keep warm drawerTo replace the keep warm drawer Care & Cleaning section Problem SolutionBefore YOU Call Solutions to common problems Exclusions Thi s wa rr anty doe s not cover the following Major Appliance Warranty

316901301 specifications

The Frigidaire 316901301 is a high-quality replacement oven range element designed to enhance cooking efficiency in your kitchen. Renowned for its durability and reliability, this product exemplifies Frigidaire's commitment to crafting premium appliances.

One of the standout features of the 316901301 is its compatibility with a wide range of Frigidaire models, which allows for easy replacement without needing extensive modifications. Built with premium materials, this heating element is designed to withstand high temperatures and regular use, ensuring longevity and consistent performance.

The 316901301 offers impressive heating efficiency, providing rapid temperature adjustments to help reduce cooking time significantly. This is particularly beneficial for busy households that require quick meal preparation. The element heats evenly across its surface, minimizing hotspots that can result in uneven cooking and improving overall culinary results.

Another notable characteristic is the ease of installation. The Frigidaire 316901301 typically comes with clear instructions, making it accessible for both professional technicians and DIY enthusiasts. This feature can save time and money, as replacing a faulty heating element is a straightforward task that does not require specialized skills.

In addition to its functional qualities, the Frigidaire 316901301 is engineered with safety in mind. The element is designed to minimize risks such as overheating and electrical faults. This safety focus is part of Frigidaire’s commitment to providing appliances that not only perform well but also prioritize user safety.

Furthermore, the sleek design of the 316901301 complements modern kitchen aesthetics, making it an appealing addition to any home. Its robust construction ensures it can withstand the everyday rigors of cooking without losing its visual appeal.

Overall, the Frigidaire 316901301 is an essential component for any Frigidaire oven, combining efficiency, durability, and safety in one robust product. For anyone seeking an efficient heating element, this model stands out as a reliable choice that does not compromise on performance or quality. With a proven track record, the Frigidaire 316901301 is an excellent investment for enhancing kitchen productivity and achieving culinary excellence.
Top Page Image Contents