Electrolux 116 K Instructions for the Installer, Important safety requirements, Location

Instructions for the Installer

Engineers technical data

OVERALL DIMENSIONS	Width:	580 mm
	Depth:	500 mm
	Height:	88 mm
CUT OUT DIMENSIONS	Width:	550 mm
	Depth:	470 mm
SUPPLY CONNECTIONS	Electric:
	230-240V 50Hz supply.
HEATING ELEMENTS RATING
Rapid Front Left Hotplate	Ø 180 mm.	2090 W
Rapid Back Left Hotplate	Ø 145 mm.	1570 W
Normal Back Right Hotplate	Ø 180 mm.	1570 W
Normal Front Right Hotplate	Ø 145 mm.	1040 W
Total Rating		6270 W

Important safety requirements

This hob must be installed in accordance with the IEE Wiring Regulations (Current Edition).

Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions.

Location

This hob has been registered as a "Class Y" appliance according to Fire Risk Regulations. Minimum distances detailed below must be observed.

The hob may be located in a kitchen, a kitchen/diner or bed sitting room, but not in a bathroom or shower room.

Before making the cut out in the worktop ensure that there is a minimum distance of 55 mm between the rear edge of the hob and the wall. A minimum distance of 100 mm must be left between the side edges of the hob and any adjacent cabinets or walls.

The minimum distance combustible material can be fitted above the hob in line with the edges of the hob is 400 mm. If it is fitted below 400 mm a space of 50 mm must be allowed from the edges of the hob. The minimum distance combustible material can be fitted directly above the hob is 700 mm.

14