Sherwood RD-8504 manual Using a punch-through function, Removing a punch-through function

Page 19

RD-8504(A)_ENG_091118:RD-8504(A)2009-11-18오￿6:41페이지19

Using a punch-through function

This remote control may be programmed to operate either the AUDIO volume punch-through or the TV volume and/or TV channel punch-through in conjunction with any of the 8 components controlled by this remote control.

For example, since this receiver will likely be used as the sound system while watching TV, you may want to adjust this receiver’s volume although this remote control is set to control the TV.

•When programming this remote control for the AUDIO volume punch-through, press and hold down both “AVR” button and “VOLUME +” button for more than 1 second.

•If programming is performed successfully, the SET LED will flicker twice.

•When you want either TV volume or TV channel

punch-through, press and hold down both “TV” button and either “VOLUME +” or “CH ∧” button for more than 1 second.

■Note :

•If you use one of AUDIO and TV volume punch- through functions, you cannot use the other.

■Removing a punch-through function

•When removing the AUDIO volume punch-through, press and hold down both “AVR” button and “VOLUME -” button for more than 1 second.

•If removing is performed successfully, the LED will flicker twice.

•When you want to remove either TV volume or TV

channel punch-through, press and hold down both “TV” button and either “VOLUME -” or “CH ∨” button for more than 1 second.

■Removing all punch-through functions

Press and hold down both “AVR” button and “AUDIO ASSIGN” button for more than 1 second.

•If removing all punch-through functions is performed successfully, the LED will flicker twice.

ENGLISH

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents RD-8504 Important Safety Instructions 120 IntroductionRead this Before Operating Your Unit Do not ExPOSE this Appliance to Rain or MoistureContents System Connections Connecting AntennasVideo conversion Connecting Video ComponentsCopyright protection system Connecting Audio ComponentsComponent video input default settings *2 Hdmi High Definition Multimedia Interface connection *1Optical Digital OUT Connecting ExTERNAL INSConnecting Digital INS and OUT Digital input default settingsSurround back speakers Connecting SPEAkERSFront Bi-Amp Connections Connecting Subwoofer PRE OUT Speaker placementPositioning the antenna Connecting for System ControlConnecting Sirius Connector only for North America SiriusConnect Home TunerAC Input Connecting Room 2 OutsRemote Sensor Front Panel ControlsFluorescent Display Bluetooth in Connector Setup MIC JACkFront AUx in JACk Universal Remote Controls Stop Function Table of the Numbered ButtonsReMote contRoL oPeRAtIon RAnGe Repeat the above steps 1 to 4 for each of your Components Entering a setup codeRemoving a punch-through function Using a punch-through functionRemoving all punch-through functions To change a macro program Programming a macro functionOperating a macro function To remove a macro programListening to a Program Source OperationsBefore operation Press the Audio Assign button Listening with headphonesAdjust the overall volume Muting the soundSurround modes Room TheaterHall StadiumDolby Truehd Enjoying Surround SoundTo cancel the surround mode for stereo operation Adjusting each channel level with test toneEnter the test tone mode Cancel the test tone functionPress the Channel Level button Adjusting the current channel levelAdjust the level of the selected channel as desired Repeat the above steps 2 and 3 to adjust each channel levelRecalling the memorized channel levels Memorizing the adjusted channel levelsListening to Radio Broadcasts Auto tuningManual tuning Auto presettingRepeat the above steps 1 to 3 to memorize other stations Manual presettingTuning to preset stations Memory BACkUP FunctionSigning up for Sirius Satellite Radio Press the Tuning UP+/DOWN- buttons repeatedly to select SRTo sign up, access the website at Sirius Satellite Radio only for North AmericaCategory search Presetting channelsPreset search Direct searchTune in the channel you want to lock or unlock Parental lockPress the Enter button Editing lock codeRecording To record audio signalsDubbing from video components onto Video Digital Audio Recording with MD Recorder Displaying the operation status Operating the sleep timerAdjusting the brightness of the fluorescent display Other FunctionsStart play on the component related to the Room 2 source When using the buttons on the front panelPress the Room 2 button to enter the Room 2 mode Set the selected mode as desiredSelect the desired input as a Room 2 source When using the buttons on the remote control unitAdjust the Room 2 volume Turn on the Room 2 functionSelect the desired menu using the Cursor UP/DOWN buttons OSD Menu SettingsTurn the menu screen on When selecting the Speaker/Room EQ Setup When selecting the System SetupWhen selecting the InputSetup When selecting the Sound ParameterBass Treble Setup menu flowRD-8504AENG091118RD-8504A2009-11-18오641페이지43 Amp Assign Setting the System SetupWhen selecting the Tone Control When selecting the AMP AssignWhen selecting the Subwoofer Mode When selecting the Hdmi Audio OutputWhen selecting the Momentary OSD When selecting the Cinema EQWhen selecting the Save/Recall Preparations When selecting the Auto SetupTo memorize the results, press the Cursor Right button When selecting the Room EQ Surround Surr Back Subwoofer When selecting the Speaker ConfigurationCenter Surround Surr Back When selecting the Speaker CrossoverAbout the speaker distance When selecting the Speaker DistanceWhen selecting the LFE When selecting the Channel LevelMemorizing the adjusted channel levels and recalling them When selecting the items other than Re-Name Setting the Input SetupWhen selecting the Video Mode When selecting the Hdmi AssignWhen selecting the Component Assign When selecting the Audio AssignWhen selecting the Video Scaling When selecting the Audio ModeWhen selecting the AV Sync When selecting the HD Audio When selecting the Re-NameTo resume its factory input source name To clear the name you entered When selecting the Volume Setting the Multi Room SetupWhen selecting the Room When selecting the InputWhen selecting the Dolby Pro Logic II Music Setting the Sound ParameterWhen selecting the Night Mode Setting the Advanced Video Problem Possible Cause Remedy Troubleshooting GuideSpecifications Setup Code Table CCE RCASSS TMKMEI KLHSTS NSC ABCHTS SATQED DKKMCS NSMRD-8504
Related manuals
Manual 68 pages 2.98 Kb

RD-8504 specifications

The Sherwood RD-8504 is a powerful and versatile audio receiver designed for audiophiles and casual listeners alike. This unit elegantly combines modern technology with essential features, making it an attractive option for those seeking an immersive audio experience for their home theater or music listening setup.

At the heart of the RD-8504 is a robust amplifier capable of delivering 100 watts per channel, ensuring that even the most demanding speakers can operate at their peak performance. This power output allows for high volume levels without distortion, making it ideal for movies, music, and gaming. The receiver supports a wide range of speaker configurations, including 7.1 surround sound, enabling users to create a rich and enveloping audio environment.

One of the standout features of the Sherwood RD-8504 is its advanced Digital Signal Processing (DSP). This technology allows the receiver to provide multiple sound modes tailored to various content types, including movies, music, and sports. The DSP ensures that audio quality is maintained while optimizing the listening experience for different environments. Additionally, the receiver provides a built-in equalizer, which allows users to fine-tune sound settings to suit their personal preferences.

Connectivity is another strong suit of the RD-8504. The receiver is equipped with multiple HDMI inputs, making it easy to connect various devices such as game consoles, Blu-ray players, and streaming devices. The HDMI ARC feature also enables seamless audio transmission from compatible televisions. Beyond HDMI, the receiver includes analog and digital inputs, as well as USB connectivity for direct playback from external devices.

The RD-8504 also shines in its support for modern audio formats, including Dolby Digital and DTS, providing immersive surround sound that enhances the overall experience of films and music. Furthermore, it supports high-resolution audio formats, allowing users to enjoy lossless music playback and taking full advantage of today’s high-quality audio sources.

In terms of user interface, Sherwood has designed the RD-8504 with an intuitive layout and clear display. The front panel features easy-to-navigate buttons and a large LCD screen that provides essential information at a glance. The remote control offers comprehensive access to all features, enabling users to customize their listening preferences effortlessly.

In summary, the Sherwood RD-8504 receiver combines powerful amplification, advanced DSP technology, and extensive connectivity options to deliver an outstanding audio experience. Its blend of modern features and user-friendly design makes it an excellent choice for anyone looking to enhance their home entertainment system. Whether for a casual movie night or an immersive music session, the RD-8504 is poised to satisfy and impress.
Top Page Image Contents