Sherwood RD-8504 manual When selecting the Audio Mode, When selecting the Video Scaling

Page 57

RD-8504(A)_ENG_091118:RD-8504(A)2009-11-18오￿6:41페이지57

Continued

■When selecting the Audio Mode

• You can select the desired audio input signal to be played.

■Notes :

•Be sure to set the Audio Mode to the audio input which is connected and assigned to the selected input source.

•When the HDMI Audio Output is set to HDMI Passthrough, no sound will be heard from the speakers connected to this receiver (except ROOM 2 speakers).

•When the Audio Mode is set to HDMI, you should connect the HDMI INs and set the HDMI Assign correctly. If not, the HDMI input flickers on the unit's display and no sound will be heard.

•When the Audio Mode is set to Digital, you should connect the DIGITAL INs and set the Audio Assign correctly. If not, the digital input flickers on the unit's display and no sound will be heard.

Auto : When there are multiple audio input signals, the audio input signals are detected and the audio input signal to be

↕played is selected automatically in the priority order of them : HDMI audio > DIGITAL audio > ANALOG audio

HDMI : The signal that is input into the HDMI IN is always played.

↕

Digital : The signal that is input into the OPTICAL or the COAXIAL DIGITAL IN is always played.

↕

Analog : The signal that is input into the analog AUDIO INs is always played.

■When selecting the Video Scaling

•You should set the resolution of video signals to be output from the HDMI MONITOR OUT to match that of your TV. (For details on the resolution compatible with your TV, refer to the operating instructions of your TV.)

•When the HDMI MONITOR OUT is connected to an HDMI-compatible TV, the TV reports to this unit what resolutions it supports. Therefore, if you set the Video Scaling to "Auto", this unit outputs the video signals of the optimum resolution acceptable for your TV.

■Notes :

•If the resolutions of the video signals which are output from the HDMI MONITOR OUT and your TV are not matched, the picture is not clear, natural or displayed.

•When 1080/24p video signals are input into the HDMI IN, the Video Scaling is automatically set to “HDMI Bypass”.

•When the Video Mode is set to “S-Video” or “Composite” and the Video Scaling is set to “HDMI Bypass”, the 480p video signals will be output from the HDMI MONITOR OUT.

•When the Video Scaling is set to “HDMI Bypass” and the video signals are input into the HDMI IN, the momentary OSD cannot be displayed via the HDMI MONITOR OUT.

Auto : To convert the video signals being input to the video signals of the highest resolution acceptable for TV and to

↕output them from the HDMI MONITOR OUT.

HDMI Bypass : To output the video signals at the same resolution that they are input, with no conversion.

↕

480p/576p : To convert the video signals to 480p(NTSC)(or 576p(PAL)) video signals and to output them.

↕

720p : To convert the video signals to 720p video signals and to output them.

↕

1080i : To convert the video signals to 1080i video signals and to output them.

↕

1080p : To convert the video signals to 1080p video signals and to output them.

■When selecting the AV Sync

•There may be a slight time delay between the video and audio signals in case that some video playback equipments may process the video signals later than the audio signals due to signal processing procedure, etc.. Should this happen, you can adjust the time delay of audio signals to synchronize the sound with the picture.

•The time delay can be adjusted within the range of 0 ~ 200 msec.

ENGLISH

57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents RD-8504 Important Safety Instructions Read this Before Operating Your Unit IntroductionDo not ExPOSE this Appliance to Rain or Moisture 120Contents System Connections Connecting AntennasVideo conversion Connecting Video ComponentsComponent video input default settings *2 Connecting Audio ComponentsHdmi High Definition Multimedia Interface connection *1 Copyright protection systemConnecting Digital INS and OUT Connecting ExTERNAL INSDigital input default settings Optical Digital OUTConnecting SPEAkERS Surround back speakersFront Bi-Amp Connections Connecting Subwoofer PRE OUT Speaker placementConnecting Sirius Connector only for North America Connecting for System ControlSiriusConnect Home Tuner Positioning the antennaAC Input Connecting Room 2 OutsFront Panel Controls Remote SensorFluorescent Display Setup MIC JACk Bluetooth in ConnectorFront AUx in JACk Universal Remote Controls Stop Function Table of the Numbered ButtonsReMote contRoL oPeRAtIon RAnGe Repeat the above steps 1 to 4 for each of your Components Entering a setup codeUsing a punch-through function Removing a punch-through functionRemoving all punch-through functions Operating a macro function Programming a macro functionTo remove a macro program To change a macro programOperations Listening to a Program SourceBefore operation Adjust the overall volume Listening with headphonesMuting the sound Press the Audio Assign buttonSurround modes Hall TheaterStadium RoomDolby Truehd Enjoying Surround SoundEnter the test tone mode Adjusting each channel level with test toneCancel the test tone function To cancel the surround mode for stereo operationAdjust the level of the selected channel as desired Adjusting the current channel levelRepeat the above steps 2 and 3 to adjust each channel level Press the Channel Level buttonRecalling the memorized channel levels Memorizing the adjusted channel levelsManual tuning Auto tuningAuto presetting Listening to Radio BroadcastsTuning to preset stations Manual presettingMemory BACkUP Function Repeat the above steps 1 to 3 to memorize other stationsTo sign up, access the website at Press the Tuning UP+/DOWN- buttons repeatedly to select SRSirius Satellite Radio only for North America Signing up for Sirius Satellite RadioPreset search Presetting channelsDirect search Category searchTune in the channel you want to lock or unlock Parental lockPress the Enter button Editing lock codeTo record audio signals RecordingDubbing from video components onto Video Digital Audio Recording with MD Recorder Adjusting the brightness of the fluorescent display Operating the sleep timerOther Functions Displaying the operation statusPress the Room 2 button to enter the Room 2 mode When using the buttons on the front panelSet the selected mode as desired Start play on the component related to the Room 2 sourceAdjust the Room 2 volume When using the buttons on the remote control unitTurn on the Room 2 function Select the desired input as a Room 2 sourceOSD Menu Settings Select the desired menu using the Cursor UP/DOWN buttonsTurn the menu screen on When selecting the InputSetup When selecting the System SetupWhen selecting the Sound Parameter When selecting the Speaker/Room EQ SetupBass Treble Setup menu flowRD-8504AENG091118RD-8504A2009-11-18오641페이지43 Amp Assign Setting the System SetupWhen selecting the Subwoofer Mode When selecting the AMP AssignWhen selecting the Hdmi Audio Output When selecting the Tone ControlWhen selecting the Cinema EQ When selecting the Momentary OSDWhen selecting the Save/Recall Preparations When selecting the Auto SetupTo memorize the results, press the Cursor Right button When selecting the Room EQ Surround Surr Back Subwoofer When selecting the Speaker ConfigurationCenter Surround Surr Back When selecting the Speaker CrossoverAbout the speaker distance When selecting the Speaker DistanceWhen selecting the LFE When selecting the Channel LevelMemorizing the adjusted channel levels and recalling them When selecting the items other than Re-Name Setting the Input SetupWhen selecting the Component Assign When selecting the Hdmi AssignWhen selecting the Audio Assign When selecting the Video ModeWhen selecting the Audio Mode When selecting the Video ScalingWhen selecting the AV Sync When selecting the Re-Name When selecting the HD AudioTo resume its factory input source name To clear the name you entered When selecting the Room Setting the Multi Room SetupWhen selecting the Input When selecting the VolumeSetting the Sound Parameter When selecting the Dolby Pro Logic II MusicWhen selecting the Night Mode Setting the Advanced Video Problem Possible Cause Remedy Troubleshooting GuideSpecifications Setup Code Table SSS RCATMK CCEKLH MEISTS NSC ABCHTS SATMCS DKKNSM QEDRD-8504
Related manuals
Manual 68 pages 2.98 Kb

RD-8504 specifications

The Sherwood RD-8504 is a powerful and versatile audio receiver designed for audiophiles and casual listeners alike. This unit elegantly combines modern technology with essential features, making it an attractive option for those seeking an immersive audio experience for their home theater or music listening setup.

At the heart of the RD-8504 is a robust amplifier capable of delivering 100 watts per channel, ensuring that even the most demanding speakers can operate at their peak performance. This power output allows for high volume levels without distortion, making it ideal for movies, music, and gaming. The receiver supports a wide range of speaker configurations, including 7.1 surround sound, enabling users to create a rich and enveloping audio environment.

One of the standout features of the Sherwood RD-8504 is its advanced Digital Signal Processing (DSP). This technology allows the receiver to provide multiple sound modes tailored to various content types, including movies, music, and sports. The DSP ensures that audio quality is maintained while optimizing the listening experience for different environments. Additionally, the receiver provides a built-in equalizer, which allows users to fine-tune sound settings to suit their personal preferences.

Connectivity is another strong suit of the RD-8504. The receiver is equipped with multiple HDMI inputs, making it easy to connect various devices such as game consoles, Blu-ray players, and streaming devices. The HDMI ARC feature also enables seamless audio transmission from compatible televisions. Beyond HDMI, the receiver includes analog and digital inputs, as well as USB connectivity for direct playback from external devices.

The RD-8504 also shines in its support for modern audio formats, including Dolby Digital and DTS, providing immersive surround sound that enhances the overall experience of films and music. Furthermore, it supports high-resolution audio formats, allowing users to enjoy lossless music playback and taking full advantage of today’s high-quality audio sources.

In terms of user interface, Sherwood has designed the RD-8504 with an intuitive layout and clear display. The front panel features easy-to-navigate buttons and a large LCD screen that provides essential information at a glance. The remote control offers comprehensive access to all features, enabling users to customize their listening preferences effortlessly.

In summary, the Sherwood RD-8504 receiver combines powerful amplification, advanced DSP technology, and extensive connectivity options to deliver an outstanding audio experience. Its blend of modern features and user-friendly design makes it an excellent choice for anyone looking to enhance their home entertainment system. Whether for a casual movie night or an immersive music session, the RD-8504 is poised to satisfy and impress.
Top Page Image Contents