Frigidaire FGEF3042KF manual To assemble the Effortless Oven Rack system

Page 8

BEFORE SETTING OVEN CONTROLS

Effortless™ Oven Rack system

Some models are equipped with a special oven rack system that automatically partially extends the oven rack from the interior oven glides to assist in easier access to your food items. This feature works whenever the oven door is opened or closed.

To assemble the Effortless™ Oven Rack system:

1.

Locate all required parts. You will need the supplied

 

oven rack (Effortless™ Oven Rack is a flat rack with a

 

special dark coating on the left and right rack

 

sides) and the 2 supplied chrome connector arms.

2.

Open the oven door. Be sure the oven is completely

 

cool before proceeding.

3.

Place the oven rack in positions 2, 3 or 4 only (see

 

previous page to verify positions).Be sure the rack

 

connector brackets are at the rear of the range and

 

pointing towards oven bottom (See Fig. 2).

4.

Assemble one connector arm at a time. With the oven

 

door open and the oven rack in place, install one end of

IMPORTANT

•Only the Effortless™ Oven Rack system should be used in oven rack position 2. Placing ANY other rack in oven rack position 2 will prevent the oven door from fully closing and may damage the oven door, oven cavity or the door connector brackets.

•If the rack system is not assembled with the connector arms the Effortless™ Oven rack may be used in oven rack positions 2 thru 7. Do not attempt to use the Effortless™ Oven rack in rack position 1.

door

rack connector

connector

bracket

bracket

 

 

the connector arm to the hole in the door connector

 

bracket (Fig. 1) and the other end in the hole in the

 

rack connector bracket (Fig. 2 and as in Fig. 3). The

 

oven rack may need to be adjusted in or out in the rack

 

position to match the length of the connector arm.

5.

While holding the connector arm in place, twist the

 

connector arm so the ends of the connector arm point

 

upwards (See Figs. 4 & 5). The connector arm should

 

now be locked into position.

6.

Repeat steps 4 and 5 for the other connector arm.

7.

Once both connector arms are properly in place, be

 

sure to test the oven rack operation by gently closing

Fig. 1

connector

arm

Fig. 3 - assembly of the Effortless™ Oven Rack

Fig. 2

oven rack

the oven door. The oven rack should move in and out of

the oven freely when the door is opened or closed.

open oven

connector

door

arm

CAUTION

Never pick up hot oven rack parts. Make sure the oven and oven racks are COMPLETLY cool and safe to touch before attempting to assemble or disassemble the Effortless™ Oven Rack.

IMPORTANT

REMOVE ALL OVEN RACKS and accessories before starting a self-clean cycle. If the oven racks are left in the oven during the self-clean cycle, the glide ability of the Effortless™ Oven Rack system will be damaged and will cause oven racks to loose their shiny finish. Remove ALL oven racks and clean according to instructions provided in the Care & Cleaning section of this manual.

connector

arm

Fig. 4

connector

arm

Fig. 5

left and right door connector brackets

with connector arm ends shown in locked position (pointing upwards)

8

Fig. 6 - Effortless™ Oven Rack after assembly

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Use&Care Contents Product Record and RegistrationImportant Safety Instructions DefinitionsImportant Instructions for Using Your Oven Important Safety Notice When flaming foods under a ventilating hood, turn the fan onAppliance Features Your electric range features includeBefore Setting Oven Controls Oven vent locationTypes of oven racks Removing, replacing & arranging racksSpecial dark coating on the left and right rack Effortless Oven Rack systemTo assemble the Effortless Oven Rack system Before Setting Surface Controls Cookware material types Using proper cookwareTypes of cooktop elements Setting Surface Controls Suggested radiant surface element settingsSingle radiant surface elements all models To operate the single radiant elementDual radiant surface elements some models To operate a dual radiant elementMed Home Canning Read the Instructions Carefully Before Using the Oven Oven Control FunctionsSetting Oven Controls Setting the clockChanging temperature display F or C Setting a silent control panelSetting oven lockout Setting the minute timerTo set the oven lockout feature for models with Quick Bake To change the timer while it is in useSetting bake Setting timed bake and delayed timed bake featuresTo change the oven temperature after bake has started To set bakeSetting timed bake and delayed timed bake features cont’d When the set bake time runs outSuggestions for Quick Bake Setting Quick BakeHow Quick Bake works To set Broil Setting broilSuggested broil settings table Operating the oven light Adjusting the oven temperatureTo adjust oven temperature Read before starting self-clean SELF-CLEANINGSelf-Cleaning When the self-clean cycle has completed Stopping or interrupting a self-clean cycleSetting a self-clean cycle Care & Cleaning Cleaning recommendation tableCooktop maintenance Cooktop cleaning To maintain the cooktop appearance do notCooktop cleaning cont’d Aluminum foil and oven linersAluminum foil and oven liners cont’d Replacing interior oven lightTo replace oven door Removing and replacing the lift-off oven doorTo remove oven door Controls section Problem SolutionSetting Oven Controls section Before YOU Call Solutions to common problems Cleaningsection Major Appliance Warranty Disclaimer of Implied Warranties Limitation of Remedies

FGEF3042KF specifications

The Frigidaire FGEF3042KF is a versatile and user-friendly electric range designed for modern kitchens. Combining efficient technology with an elegant design, this range meets the needs of both everyday cooking and special culinary endeavors.

One of the standout features of the FGEF3042KF is its smooth glass cooktop, providing four radiant elements that deliver various heating power levels. This cooktop ensures even heating and easy cleaning, making it convenient for busy home chefs. The top also features a convenient oven light that illuminates the interior, allowing you to monitor your dishes without opening the door.

Equipped with a spacious 5.0 cubic foot capacity oven, the FGEF3042KF can comfortably accommodate large meals, whether you're roasting a holiday turkey or baking multiple trays of cookies. The oven is designed with a sleek, self-cleaning feature, which uses high-heat steam to burn off food residue, significantly simplifying cleanup.

For baking enthusiasts, this range includes the Even Baking Technology, which ensures consistent and even cooking results. This is particularly beneficial for pastries and layered cakes that require precise baking conditions. Additionally, it offers a built-in timer and a temperature probe that allows you to monitor your meal's progress without needing to constantly check the oven's interior.

The Frigidaire FGEF3042KF also emphasizes safety and efficiency. It comes with an array of safety features such as the oven lock-out option, preventing accidental changes while cooking. Furthermore, the range adheres to energy efficiency standards, which not only helps reduce your carbon footprint but also cuts down on utility costs.

Aesthetically, the FGEF3042KF is designed to complement any kitchen decor. Its stainless steel finish adds a touch of modern elegance, while the intuitive control knobs and backlit LED indicators make operation straightforward.

In summary, the Frigidaire FGEF3042KF is more than just an electric range; it is a cooking partner that brings convenience and functionality to your kitchen. With its advanced features such as a self-cleaning oven, Even Baking Technology, and user-friendly design, it sets a new standard for reliability and performance in cooking appliances. Whether you're a novice home cook or an experienced chef, this range is equipped to enhance your culinary creations.
Top Page Image Contents