Sherwood RD-5503 When selecting the Distance, When selecting the desired unit

Page 34

When selecting the DISTANCE

1. Press the CURSOR UP( )/DOWN( ) buttons to select the DISTANCE, then press the ENTER button.

ENGLISH

2. Press the CURSOR UP( )/DOWN( ) buttons to

3. Press the CURSOR LEFT( )/RIGHT( ) buttons to

select the desired item.

 

set the selected item as desired.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note :

When selecting the desired unit

• You cannot select the speakers set to "N (None or No)".

• You can select either "M (Meter)" or "FT (Feet)".

 

• Once a unit is selected, the distances are automatically

 

changed in the selected unit.

When setting the distance

• You can set the distance within the range of 0.0 ~ 9.0 meters in 0.3 meter intervals (or 0 ~ 30 feet in 1 feet intervals).

4. Repeat the above steps 2 and 3 until the distances are all set as desired.

About the speaker distance

When enjoying multi-channel surround playback with Dolby Digital sources, etc., it is ideal that the center, surround and subwoofer speakers should be the same distance from the main listening position as the front speakers. By entering the distance between the listening position and each speaker, the delay times of center, surround and subwoofer speakers are automatically adjusted to create an ideal listening environment virtually as if the center, surround and subwoofer speakers were at their ideal locations respectively.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents
RD-5503 Read this Before Operating Your Unit PAN-EUROPEAN Unified VoltageContents Connecting Antennas System ConnectionsConnecting AUDIO/VIDEO Components Connecting Subwoofer PRE OUT Surround left and right speakers Speaker placementFront left and right speakers and center speaker SubwooferFluorescent Display Surround Mode UP/DOWNFront Panel Controls Fluorescent DisplayRemote Controls Remote Control Operation Range Loading BatteriesBefore operation OperationsListening to a Program Source Tuner CD Tape Video 1 VideoWhen CD, Video 1 is selected as an input source Bass Adjusting the tone bass and trebleTone on Surround Sound 2CH downmix mode Select the desired surround modeTo cancel the surround mode for stereo operation Enjoying Surround SoundWhen adjusting the sound parameters Night Pano Width DimenAdjusting each channel level with test tone Adjusting the current channel level Memorizing the adjusted channel levels Recalling the memorized channel levelsAuto presetting Auto tuningManual tuning FM ST FM MonoMemory Backup Function Manual presettingTuning to preset stations TP search Listening to RDS Broadcastsfm onlyRDS search RDS Srch TP Srch PTY Srch OFFPTY search DisplayRecording with Tape RecordingRecording with Video Other Functions Operating the sleep timerAdjusting the brightness of the fluorescent display Displaying the operation statusUsing Different Functions on the Front Panel Preset Tune CH Level OFF Tone SETSystem Setup Setup menu flow Setting the System When selecting the Subwoofer mode When selecting the Tone When selecting the Digital Setting the InputWhen selecting the Auto Surround Setting the Speaker Setup When selecting the Configuration About the speaker sizeWhen setting the distance When selecting the DistanceWhen selecting the desired unit About the speaker distanceWhen selecting the Crossover About the crossover frequencySetting the CH Level Memorizing the adjusted channel levels Setting the Parameter When selecting the Night ModeWhen selecting the C. Width Center width control When selecting the Dolby Plii MusicWhen selecting the Pano Panorama mode When selecting the Dimen Dimension controlProblem Troubleshooting GuidePossible Cause Remedy Specifications RD-5503
Top Page Image Contents