Sherwood RD-5503 Speaker placement, Front left and right speakers and center speaker, Subwoofer

Page 7

ENGLISH

Speaker placement

Ideal speaker placement varies depending on the size of your room and the wall coverings, etc. The typical example of speaker placement and recommendations are as follows :

Front left and right speakers and center speaker

Place the front speakers with their front surfaces as flush with TV or monitor screen as possible.

Place the center speaker between the front left and right speakers and no further from the listening position than the front speakers.

Place each speaker so that sound is aimed at the location of the listener’s ears when at the main listening position.

Surround left and right speakers

Place the surround speakers approximately 1 meter (40 inches) above the ear level of a seated listener on the direct left and right of them or slightly behind.

Subwoofer

The subwoofer reproduces powerful deep bass sounds. Place a subwoofer anywhere in the front as

desired.

Notes :

When using a conventional TV, to avoid interference with the TV picture, use only magnetically shielded front left and right and center speakers.

To obtain the best surround effects, the speakers except the subwoofer should be full range speakers.

1.TV or screen

2.Front left speaker

3.Front right speaker

4.Center speaker

5.Subwoofer

6.Surround left speaker

7.Surround right speaker

7

Image 7 Contents
RD-5503 PAN-EUROPEAN Unified Voltage Read this Before Operating Your Unit Contents System Connections Connecting AntennasConnecting AUDIO/VIDEO Components Connecting Subwoofer PRE OUT Subwoofer Speaker placementFront left and right speakers and center speaker Surround left and right speakersFluorescent Display Surround Mode UP/DOWNFront Panel Controls Fluorescent DisplayRemote Controls Loading Batteries Remote Control Operation RangeTuner CD Tape Video 1 Video OperationsListening to a Program Source Before operationWhen CD, Video 1 is selected as an input source Bass Adjusting the tone bass and trebleTone on Surround Sound Enjoying Surround Sound Select the desired surround modeTo cancel the surround mode for stereo operation 2CH downmix modeNight Pano Width Dimen When adjusting the sound parametersAdjusting each channel level with test tone Adjusting the current channel level Recalling the memorized channel levels Memorizing the adjusted channel levelsFM ST FM Mono Auto tuningManual tuning Auto presettingMemory Backup Function Manual presettingTuning to preset stations RDS Srch TP Srch PTY Srch OFF Listening to RDS Broadcastsfm onlyRDS search TP searchDisplay PTY searchRecording with Tape RecordingRecording with Video Displaying the operation status Operating the sleep timerAdjusting the brightness of the fluorescent display Other FunctionsPreset Tune CH Level OFF Tone SET Using Different Functions on the Front PanelSystem Setup Setup menu flow When selecting the Subwoofer mode Setting the SystemWhen selecting the Tone When selecting the Digital Setting the InputWhen selecting the Auto Surround Setting the Speaker Setup About the speaker size When selecting the ConfigurationAbout the speaker distance When selecting the DistanceWhen selecting the desired unit When setting the distanceAbout the crossover frequency When selecting the CrossoverSetting the CH Level Memorizing the adjusted channel levels When selecting the Night Mode Setting the ParameterWhen selecting the Dimen Dimension control When selecting the Dolby Plii MusicWhen selecting the Pano Panorama mode When selecting the C. Width Center width controlProblem Troubleshooting GuidePossible Cause Remedy Specifications RD-5503