Frigidaire 316902300 important safety instructions To assemble the Effortless Oven Rack system

Page 8

BEFORE SETTING OVEN CONTROLS

Effortless™ Oven Rack system

Some models are equipped with a special oven rack system that automatically partially extends the oven rack from the interior oven glides to assist in easier access to your food items. This feature works whenever the oven door is opened or closed.

To assemble the Effortless™ Oven Rack system:

1.

Locate all required parts. You will need the supplied

 

oven rack (Effortless™ Oven Rack is a flat rack with a

 

special dark coating on the left and right rack

 

sides) and the 2 supplied chrome connector arms.

2.

Open the oven door. Be sure the oven is completely

 

cool before proceeding.

3.

Place the oven rack in positions 2, 3 or 4 only (see

 

previous page to verify positions).Be sure the rack

 

connector brackets are at the rear of the range and

 

pointing towards oven bottom (See Fig. 2).

4.

Assemble one connector arm at a time. With the oven

IMPORTANT

Only the Effortless™ Oven Rack system should be used in oven rack position 2. Placing ANY other rack in oven rack position 2 will prevent the oven door from fully closing and may damage the oven door, oven cavity or the door connector brackets.

If the rack system is not assembled with the connector arms the Effortless™ Oven rack may be used in oven rack positions 2 thru 6. Do not attempt to use the Effortless™ Oven rack in rack position 1.

door

rack connector

connector

bracket

bracket

 

 

door open and the oven rack in place, install one end of

 

the connector arm to the hole in the door connector

 

bracket (Fig. 1) and the other end in the hole in the

 

rack connector bracket (Fig. 2 and as in Fig. 3). The

 

oven rack may need to be adjusted in or out in the rack

 

position to match the length of the connector arm.

5.

While holding the connector arm in place, twist the

 

connector arm so the ends of the connector arm point

 

upwards (See Figs. 4 & 5). The connector arm should

 

now be locked into position.

6.

Repeat steps 4 and 5 for the other connector arm.

7.

Once both connector arms are properly in place, be

Fig. 1

connector

arm

Fig. 3 - assembly of the Effortless™ Oven Rack

Fig. 2

oven rack

sure to test the oven rack operation by gently closing

the oven door. The oven rack should move in and out of

the oven freely when the door is opened or closed.

open oven

connector

door

arm

CAUTION

REMOVE ALL OVEN RACKS and accessories before starting a self-clean cycle. If the oven racks are left in the oven during the self-clean cycle, the glide ability of the Effortless™ Oven Rack system will be damaged and will cause oven racks to loose their shiny finish and or turn blue. Remove ALL oven racks and clean according to instructions provided in the Care & Cleaning section of this manual.

Make sure the oven and oven racks are COMPLETLY cool and safe to touch before attempting to assemble or disassemble the Effortless™ Oven Rack system. Never pick up hot oven rack parts.

connector arm

Fig. 4

connector

arm

Fig. 5

left and right

door connector

brackets

with connector arm ends shown in locked position (pointing upwards)

Fig. 6 - Effortless™ Oven Rack after assembly

8

Image 8
Contents Use&Care Contents Product Record and RegistrationImportant Safety Instructions DefinitionsImportant Instructions for Using Your Oven SELF-CLEANING Ovens Features AT a Glance Your electric range features includeBefore Setting Oven Controls Oven vent locationRemoving, replacing & arranging racks Types of oven racksSpecial dark coating on the left and right rack Effortless Oven Rack systemTo assemble the Effortless Oven Rack system Before Setting Surface Controls Power plus feature some modelsAir circulation in the oven Baking layer cakes with 1 or 2 oven racksUsing proper cookware Cookware material typesCooktop element power level display windows Available power level settingsSabbath Day feature Sb message Lockout window messageTo operate a single radiant surface element Step Press Setting Surface ControlsSingle radiant surface elements Bridge cooking zone Step PressPress on-off Keep warm zone temperature selectionKeep warm zone Home Canning Oven Control Functions Minimum & maximum control settingsFeature Min. temp. /time Max. temp. /time Setting Oven Controls Setting the clockSetting 12 or 24 hour display modes Changing oven temperature displaySetting a silent control panel Setting lockoutSetting the minute timer Add a minute featureSetting powerplus preheat Setting bakeSetting bake time When the set bake time runs outSetting Oven Controls Benefits of the convect feature Convect roast all modelsSuggestions for convect baking Press convectSuggestions for convect broil Setting convect convection convertConvect broil some models Suggested broil settings table electric oven BroilTo set broil Step Press Leave the oven door openSetting pizza feature Setting chicken nuggets featureSetting chicken nuggets feature cont’d Setting keep warmAdjusting the oven temperature Example increase the oven temperature by 30F Step PressExample decrease the oven temperature by 30F Step Press Operating the oven lightMy Favorite Bake time and delay start pads To Set the Sabbath Feature for use onIf a timed bake or delayed timed bake is needed To Set the Sabbath Feature cont’d Keep warm drawer indicator light Keep Warm DrawerOperating the keep warm drawer Operating keep warm drawerArranging keep warm drawer rack positions Keep warm drawer recommended settingsKeep warm drawer recommended food settings FoodItem Setting Adhere to the following self-clean precautions SELF-CLEANINGSelf-cleaning Press delay start When the self-clean cycle has completedCare & Cleaning Cleaning recommendation tableCooktop maintenance Cooktop cleaning Do notFor light to moderate soil For heavy, burned on soilReplacing the oven interior light bulb Cooktop cleaning cont’dReplacing the oven interior light To replace oven door Removing and replacing the lift-off oven doorTo remove oven door Problem Solution Used. See Cooktop Cleaning and Maintenance in the Care CleaningsectionMajor Appliance Warranty Exclusions This warranty does not cover the following

316902300 specifications

The Frigidaire 316902300 is an essential component for any kitchen, designed to enhance cooking efficiency and foster culinary creativity. This replacement oven range igniter is particularly notable for its durability and easy installation, making it a popular choice among DIY enthusiasts and professional chefs alike.

One of the standout features of the Frigidaire 316902300 is its compatibility. This igniter works with a variety of Frigidaire and Electrolux stove models, providing a reliable solution for those who need to replace a worn or malfunctioning igniter. Homeowners can rest assured that it is a compatible and trusted option for their cooking appliances, ensuring a seamless fit and operation.

From a technological standpoint, the igniter utilizes advanced ceramic materials that are designed to withstand high temperatures, making it highly resistant to wear and tear. This durability extends the life of the component, ensuring it can perform its functions effectively over time. The Frigidaire 316902300 operates on a 120-volt system, providing sufficient power to ignite gas burners swiftly and securely.

Installation is both straightforward and user-friendly, catering to those who might not have extensive experience with appliance repairs. The igniter comes with clear instructions, allowing customers to replace the old igniter without the need for professional assistance. This not only saves on repair costs but also empowers individuals to take charge of their appliance maintenance.

Safety is another key characteristic integrated into the design of the Frigidaire 316902300. The igniter effectively reduces the risk of gas leaks by ensuring a reliable ignition every time. In an environment where gas is involved, having a dependable igniter is crucial for safe cooking.

In terms of performance, the igniter provides a consistent and powerful flame. This not only ensures that food cooks evenly but also adds to the overall cooking experience. With the Frigidaire 316902300, users can expect improved ignition reliability, which translates into faster cooking times and enhanced culinary results.

Overall, the Frigidaire 316902300 is an excellent choice for anyone seeking to maintain or improve their kitchen’s performance. With its compatibility, durability, user-friendly installation, and safety features, it stands out as a necessary component for modern cooking appliances. Whether you are a seasoned chef or a home cook, this igniter promises to deliver reliability and efficiency, making it a worthwhile investment for your kitchen.