Frigidaire BS100 manual Before You Call, Solutions to Common Problems

Page 17

Before You Call

Solutions to Common Problems

Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance.

OCCURRENCE

POSSIBLE CAUSE / SOLUTION

 

 

Range is not level.

Poor installation. Place oven rack in center of oven. Place a level on the oven rack. Adjust

 

leveling legs at base of range until the oven rack is level.

 

 

 

Be sure floor is level and is strong and stable enough to adequately support range.

 

 

 

If floor is sagging or sloping, contact a carpenter to correct the situation.

 

 

 

Kitchen cabinet alignment may make range appear unlevel. Be sure cabinets are square

 

and have sufficient room for range clearance.

Cannot move appliance easily. Appliance must be accessible for service.

Cabinets not square or are built in too tightly. Contact builder or installer to make appliance accessible.

Carpet interferes with range. Provide sufficient space so range can be lifted over carpet.

Surface element too hot or not hot enough. Incorrect control setting. Be sure the correct control is on for the element to be used.

Surface element does not heat.

Lightweight or warped pans used. Use only flat, evenly balanced, medium or heavyweight cookware. Flat pans heat better than warped pans. Cookware materials and weight of the material affect heating. Heavy and medium-weight pans heat evenly. Because lightweight pans heat unevenly, foods may burn easily.

No power to the appliance. Check steps under "Entire Appliance Does Not Operate" in this Before You Call checklist.

Incorrect control setting. Make sure the correct control is on for the surface unit to be used.

Entire appliance does not operate.

Make sure cord/plug is plugged tightly into outlet.

Service wiring is not complete. Contact your dealer, installing agent or authorized servicer.

Power outage. Check house lights to be sure. Call your local electric company for service.

Oven light (some models) does not work. Replace or tighten bulb. See Changing Interior Oven Light (some models) in this Use & Care Manual for instructions.

Oven control beeps continuously with no indicator lights flashing. (If model is equipped with a display F1 or F3 will show.)

This oven is equipped with a state of the art electronic oven control. Among its many features is a full time oven circuit diagnostics system. The control constantly monitors its internal circuitry as well as several crucial oven circuits to insure they are all operating correctly. If at any time one of these systems fails, the control will immediately stop operation, and beep continuously (flashing an error code of F1 or F3 in the display window, if equipped). Electronic control has detected a fault condition. Press CLEAR/OFF to clear the display and stop the beeping. Reprogram oven. If fault recurs, record fault number, press CLEAR/OFF and contact an authorized servicer.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 316257128 Register Your Product Welcome & CongratulationsImportant Safety Instructions Important Instructions for Usingyour Cooktop Features At a Glance Ceramic Glass Cooktop Element On and Hot Surface Indicator Lights Before Setting Oven ControlsArranging Oven Racks Removing & Replacing Oven RacksSuggested Surface Control Settings all models Setting Surface ControlsSetting Type of Cooking To Operate the Surface Elements Coil Cooktop models onlyTo Set the Minute Timer Setting Oven ControlsTo Change the Minute Timer while it is in use Oven Control FunctionsTo Set the Controls for Baking To Set or Change the Temperature for BakingTo Change the Oven Temperature after Baking has Started Rack Position From Top Food To BroilPainted Control Panel, Decorative Trim Care & CleaningStainless Steel some models Oven Racks Oven DoorFor heavy, burned on soil Plastic or foods with a high sugar contentFor light to moderate soil Care & Cleaning of Stainless Steel some models Cleaning the Oven Bottom all modelsChanging the Interior Oven Light some models Do not use the following on the ceramic glass cooktopNever immerse a surface element in water Raising the Top for Cleaning Coil Cooktop models onlyTo Replace Oven Door Removing and Replacing the Oven Door all modelsTo Remove Oven Door Before You Call Solutions to Common ProblemsDripbowlsarepittingorrustingCoilelement Page Limitedwarranty

BS100 specifications

The Frigidaire BS100 is a remarkable appliance that embodies innovation and efficiency in the realm of home cooking. Designed with the modern kitchen in mind, this appliance offers a range of features and technologies that cater to various culinary needs, making it a versatile choice for home chefs.

One of the standout features of the Frigidaire BS100 is its advanced cooking technologies. The device is equipped with a powerful cooking system that ensures even heat distribution for perfectly cooked meals every time. This feature is particularly beneficial for baking and roasting, as it eliminates the risk of hot spots that can lead to uneven cooking.

The BS100 also boasts a user-friendly digital interface that simplifies the cooking process. With easy-to-navigate touch controls, users can effortlessly select cooking modes, adjust temperatures, and set timers. This intuitive design makes it accessible for individuals of all skill levels, from beginner cooks to seasoned chefs.

In terms of capacity, the Frigidaire BS100 does not disappoint. With a spacious interior, it provides ample room to prepare multiple dishes simultaneously – an essential feature for families or those who enjoy hosting gatherings. The appliance is designed to accommodate various cooking vessels, ensuring flexibility for recipes that require different sizes and types of cookware.

Energy efficiency is another key characteristic of the BS100. This model is engineered to consume less energy without compromising performance, making it an environmentally friendly choice. Users can enjoy peace of mind knowing that they are reducing their energy consumption while still achieving excellent cooking results.

Safety features are also prioritized in the Frigidaire BS100. This appliance is equipped with an automatic shut-off function, which provides added security by preventing overheating and potential fire hazards. Additionally, the cool-touch exterior allows for safe handling, minimizing the risk of burns during use.

In conclusion, the Frigidaire BS100 is a well-rounded appliance that combines advanced cooking technologies with user-friendly features. Its spacious capacity, energy-efficient performance, and safety-centric design make it an ideal choice for anyone looking to elevate their cooking experience. Whether you are preparing a family meal or experimenting with new recipes, the Frigidaire BS100 is equipped to meet your culinary needs with ease.
Top Page Image Contents