Sherwood RV-4060R manual Surround Mode Control, Dolby PRO Logic, Dolby 3 Stereo, Test Tone

Page 9

DOLBY 3 STEREO : Choose this setting to play back movies and music (especially Laser Discs, video cassettes and TV broadcasts with DOLBY SURROUND sound) when not using the rear speakers. You get a clear perception of the position and direction of the sound.

DOLBY 3 STEREO combines the front and rear signals so that you can enjoy a regenerated sound field, which has comparatively more lively presence and a more expansive feeling from the three front channels (front left, front right and center speakers) than that of ordinary stereo regeneration.

OFF : Turns off the center and rear speakers for normal stereo operation.

Note : Dolby Pro Logic and Dolby 3 Stereo will not work properly if the signal passes through a graphic equalizer. Please refer to your equalizer operating instructions for guidance on switching off (or defeating) the equalizer.

SURROUND MODE CONTROL

Each surround mode has programmed values for center- mode, center and rear levels and/or for rear channel time delay (as appropriate).

These values will then be kept in the memory until they are changed again.

The various values that can be adapted in the different surround modes are described next:

DOLBY PRO LOGIC

Use the SURROUND MODE or press PRO LOGIC button on the remote control.

Press the CENTER MODE button to select the required center channel mode :

NORMAL – If the center speaker is a smaller model, which means it will not reproduce bass as deep or as loud as the left and right speakers.

WIDE – If all three front speakers are identical and capable of reproducing low bass information and if equal power is available in the left, center and right amplifiers. PHANTOM – If no center speaker is installed.

Use the REAR LEVEL buttons to adjust the rear level (related to the front level).

SUR lights up on the display.

The level will be indicated on the display : VOL SUR

Use the DELAY TIME button to adjust the delay time of the rear channel.

The delay time of the rear channel is changed to 15, 20, 25, 30 milli seconds.

Use the CENTER LEVEL buttons to adjust the center level.

CEN lights up on the display.

The level will be indicated on the display : SUR

VOL

DOLBY 3 STEREO

Use the SURROUND MODE or press the 3 STEREO button on the remote control.

CENTER MODE : In Dolby 3 Stereo mode, you can only select NORMAL and WIDE.

CENTER LEVEL : Use the CENTER LEVEL buttons to adjust the center level as described above.

REAR LEVEL : Adjusting the rear level is not available in Dolby 3 Stereo mode.

DELAY TIME : Adjusting the delay time of the rear

AMPLIFIER

channel is not available in Dolby 3 stereo mode

TEST TONE

Use TEST TONE button on the remote control to obtain the correct balance between the levels of the left, right, center and rear speakers in the DOLBY PRO LOGIC and DOLBY 3 STEREO mode.

DOLBY PRO LOGIC

Press the TEST TONE button on your remote control. You will hear a test tone from the left (FL), center (C), right (FR) and rear (R) speakers in turn, in repeating a cycle.

While sitting in the usual listening position, adjust the level of the center and the surround channels to get the same sound level with the front channel.

The levels will be indicated on the display.

When you are satisfied with the levels, press the TEST TONE button on your remote control again to turn off the test tone.

DOLBY 3 STEREO

In the Dolby 3 Stereo mode you can adjust only the levels of the left, right and center speakers.

Manufactured under license from Dolby Laboratories

Licensing Corpration. "Dolby", and "PRO LOGIC" are trademarks of Dolby Laboratories Licensing Corporation.

ENGLISH

9

Image 9
Contents RV-4060R Introduction For Your SafetyConnections Speaker Positioning InstallationFron Function OverviewVOLUME/TONE/BALANCE Level Indicators AM/FM IndicatorMemory Indicator Auto IndicatorRemote Function Overview Amplifier Dolby PRO Logic Surround Mode ControlDolby 3 Stereo Test ToneTuner Additional Information Troubleshooting RV-4060R

RV-4060R specifications

The Sherwood RV-4060R is a remarkable addition to the world of high-fidelity audio receivers, designed to deliver an immersive listening experience. Known for its versatility and numerous features, the RV-4060R is an ideal choice for audiophiles and casual listeners alike.

One of the standout features of the Sherwood RV-4060R is its power output. The receiver is capable of delivering 60 watts per channel across a wide range of audio frequencies, ensuring that it can handle various speaker configurations while providing clear and powerful sound. Whether you're hosting a gathering or enjoying a quiet evening at home, the RV-4060R ensures that every note and beat is heard with clarity.

In terms of connectivity, the RV-4060R is equipped with multiple input options, including HDMI, optical, and coaxial inputs. This extensive range of connectivity allows users to easily link up a variety of devices, from gaming consoles to streaming devices and Blu-ray players. The inclusion of Bluetooth technology further enhances this model's versatility, allowing users to wirelessly stream their favorite music directly from smartphones, tablets, or computers.

The RV-4060R also supports various audio formats, including Dolby Digital and DTS, making it suitable for both movies and music. With built-in decoding capabilities, this receiver can effectively deliver cinematic sound quality, perfect for home theatre setups. The advanced signal processing ensures that dialogue is clear, while ambient sounds are represented with precision.

Additionally, the Sherwood RV-4060R comes with a user-friendly interface and a remote control, simplifying the navigation through different audio settings and sources. The sleek design and modern aesthetics blend seamlessly with any home décor, making it not just a functional device but also an attractive part of your entertainment center.

The receiver is built with durable and high-quality components, contributing to its long-lasting performance. It also incorporates protective circuitry to safeguard against overloads and short circuits, ensuring reliable operation.

In summary, the Sherwood RV-4060R stands out for its powerful performance, comprehensive connectivity options, support for surround sound formats, and user-friendly design. Whether you're a movie buff or a music lover, the RV-4060R is well-equipped to elevate your audio experience to new heights, proving to be a worthwhile investment for any home audio system.