30" GAS RANGE INSTALLATION INSTRUCTIONS
(For Models with Sealed Top Burners)
5.Read these electrical connection details first then connect electricity to range.
Before servicing, disconnect electrical supply at circuit breaker, fuse or power cord.
Electric Requirements: A dedicated, properly grounded and polarized branch circuit protected by a 15 amp. circuit breaker or time delay fuse. See serial plate for proper voltage.
Extension Cord Precautions:
Because of potential safety hazards under certain conditions, we strongly recommend against the use of any extension cord. However, if you still elect to use an extension cord, it is absolutely necessary that it be a UL listed
PLEASE READ CAREFULLY! For personal safety, this product must be properly grounded.
Where a standard
DONOT,UNDERANYCIRCUMSTANCES,CUTORREMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.
Grounding Instructions
The power cord of this appliance is equipped with a
6.Assembly of the Burner Caps and Burner Grates:
It is very important to makes sure that all of the Surface Burner Caps and Surface Burner Grates are installed correctly and in the correct locations.
Please Note: The burner heads are secured to the cooktop. THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop.
REMEMBER — DO NOT ALLOW SPILLS, FOOD,
CLEANING AGENTS OR ANY OTHER MATERIAL TO ENTER THE GAS ORIFICE HOLDER OPENING. Always keep the Burner Caps and Burner Heads in place whenever the surface burners are in use.
6