Danby DR299BLSGLP Installation Instructions, Leveling a Free Standing Range, GAS Connections

Page 6

INSTALLATION INSTRUCTIONS

Be sure the appliance is properly installed and grounded by a qualified technician. It is the responsibility of the technician to be certain that your range is properly installed. Situations caused by improper installation are not covered under the warranty. Any expenses incurred due to such situations will not be paid by the manufacturer of the appliance.

WARNING: To reduce the risk of tipping the appliance by abnormal usage or improper door loading, the appliance must be secured by properly installing the anti-tip device packed with the appliance. To check if the device is installed and engaged properly, carefully tip the range forward. The anti-tip device should engage and prevent the range from tipping over.

If this range is removed for any reason, service or cleaning etc,. it must be replaced as outlined in the installation instructions, before placing the range back in operation.

LEVELING A FREE

STANDING RANGE

All free-standing ranges must be level to obtain proper cooking results. The leveling legs should be screwed into the corner brackets. Place a level, or a pan or measuring cup partially filled with water, level on oven rack. Adjust leveling legs until the range is level. The top of the side panels should be level with countertop or work surface.

IMPORTANT: Be sure to keep the leg levelers. Leveling of the range is very important.

GAS CONNECTIONS

Have the dealer where you purchased your new range install or recommend a qualified installer. Installation must conform with local codes. The range should be connected to a supply line with 1/2-inch black iron pipe or a certified flexible type stove connector. To prevent gas leaks, put an approved sealing compound, which is resistant to liquefied gases, on all threaded connections.

IMPORTANT: Do not apply pressure directly to the range manifold pipe when tightening supply connections. The manifold pipe should be held securely at the pressure regulator to prevent twisting. Hold the pressure regulator with a wrench during the tightening of the connection, or the manifold pipe may be twisted and split, causing a dangerous leak.

Note: The installation of ranges designed for manufactured (mobile) homes must conform to specific standards and local codes.Check all piping connections in the unit for leaks. Never use an open flame to check for gas leaks. It is possible for connections made at the factory to leak due to vibrations encountered in transportation. Have any suspected leaks repaired before use by a qualified service personnel.

ELECTRICAL

Your range is grounded with a three-conductor (three-prong plug) supply cord which

CONNECTIONS

will ground the range when plugged into a similar grounded wall receptacle.

 

 

If the backgaurd of the range has a clock or light, connect the cord from the backgaurd into the special terminal block located at the top of the main back directly under the backgaurd supply cord.The appliance must be electrically grounded when installed in accordance with local codes.

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents DR299BLSGLP Welcome Please do this NOWResulting in property damage, personal injury, or death What to do if YOU Smell GAS Important Safety InformationProper Installation Before First USEImportant Safety Information cont’d Important SafegaurdsEnergy Saving Tips Surface CookingOven Cooking GAS Connections Installation InstructionsLeveling a Free Standing Range ElectricalUsing Your Range Operating InstructionsFlame Size Type of Cooking Using Your Operating Instructions cont’dNO. of Pans Position on Rack Care and Cleaning Setting Clock & TimerCare and Cleaning cont’d Troubleshooting Problem Possible Cause SolutionLimited Warranty GAS Range Bienvenida Sírvase Realizar LO Siguiente AhoraQUÉ Hacer SI Huele a GAS InstallaciónInformacion Importantes DE Seguridad Antes DE Utiliza PrimeroInformacion Importantes DE Seguridad cont’d Medidas DE Protección ImportantesConsejos Para Ahorrar Energía Cocción en las hornillasCocción en el horno Conexiones DE GAS Instrucciones DE InstalaciónCómo Nivelar UNA Cocina Independiente ConexionesInstrucciones Operadoras Cómo Usar LA CocinaPosición EN LA Bandeja Instrucciones Operadoras cont’dCómo Usar LA Centro del bandejaPara ajustar el temporizador de minutos de 4 botones Cuidados Y LimpiezaAjuste DEL Reloj Y EL NotasCuidados Y Limpieza cont’d Problema Posible Causa Solución Antes DE Llamar AL Servicio TécnicoCocinas DE GAS Garantía Limitada Bienvenue Installation Appropriée Consignes DE Sécurité ImportantesAvant Première Utilisation Consignes DE Sécurité Importantes suite DE SécuritéSuggestions Économiser Dénergie Cuisson au dessus de la cuisinièreCuisson au four Instructions Dinstallation Mise À Niveau D’UNE Cuisinière AutostableRaccords DE GAZ Choix de la température Consignes D’UTILISATIONExploitation du brûleur supérieur CuireDisposer SUR Grilles Consignes D’UTILISATION suiteUtiilisation DE Votre CasserolesSoins ET Entretien Réglage DE L’HORLOGE ET DE LA MinuteriePorte de four de décollage Surface de fourCavité de four Nettoyage de la porte intérieureDépannage Les brûleurs du dessus deGarantie Limitée DE Cuisinière À GAZ GAS Range Cuisinière DE GAZCocina DE GAS
Related manuals
Manual 35 pages 22.29 Kb

DR299BLSGLP specifications

The Danby DR299BLSGLP is a standout compact refrigerator designed to meet the needs of modern consumers looking for efficiency, style, and functionality in their kitchen appliances. This model is particularly well-suited for apartments, dorm rooms, or office break rooms, combining a stylish exterior with advanced features to enhance convenience and utility.

One of the main features of the Danby DR299BLSGLP is its generous 2.9 cubic feet of storage space. This compact design allows users to store a substantial amount of food and beverages without taking up excessive floor space. The refrigerator includes a full-width cooling shelf, adjustable shelves, and a built-in can dispenser, making it easy to organize and access items. The reversible door allows for versatile placement in various living situations, accommodating different room layouts and personal preferences.

This model employs advanced cooling technologies, ensuring that your food and drinks stay fresh and at the optimum temperature. The mechanical thermostat provides precise temperature control, enabling users to customize their cooling environment according to their requirements. Additionally, the energy efficiency of the Danby DR299BLSGLP is noteworthy; it is ENERGY STAR rated, which means it consumes less energy compared to standard models, helping to reduce your carbon footprint and save on electricity bills.

Another highlight of the Danby DR299BLSGLP is its sleek black stainless steel finish, which not only enhances the aesthetic appeal but also provides a durable exterior that is resistant to fingerprints and scratches. Its modern design makes it a perfect fit for contemporary kitchens or offices, seamlessly blending with existing decor. The integrated door handle adds to its streamlined appearance, making it not just an appliance but a stylish addition to your space.

Safety features are also a priority with this model. The refrigerator is equipped with a child safety lock, ensuring that curious hands cannot easily access the contents inside. Moreover, the interior LED lighting brightens up the storage area, making it easier to locate items even in low-light conditions.

In conclusion, the Danby DR299BLSGLP packs a multitude of features into a compact design, making it a practical choice for those needing space-saving solutions without sacrificing style. With its robust cooling capabilities, energy efficiency, and elegant design, this refrigerator is an excellent investment for anyone looking to enhance their living or working environment.
Top Page Image Contents