Sherwood RD-7103 manual Input source

ENGLISH

When CD or VIDEO1~3 is selected as an		7	To compensate for edgy or shrill movie
input source			sound tracks.
4	Select the digital or analog input		CINEMA EQ
	connected as desired.
	DIGITAL
	INPUTS

		Then “CINEMA EQ ON” is displayed.
Each time this button is pressed, the corresponding		Press it again to cancel, the “CINEMA EQ OFF”
input is selected as follows ;		is displayed.
Optical 1 Coaxial 1 Coaxial 2
	No display(ANALOG)
To listen to a DTS or Dolby Digital program source		To mute the sound.
		8
in the 2-CH downmix mode(the stereo mode), the
corresponding digital input must be selected. (For
details, refer to “Downmixing into 2 front channels”
on page 18.)
Notes :		MUTE
When the selected optical or coaxial digital input is
not connected, the selected digital input display
flickers, indicating the lack of sound. (Refer to
“ENJOYING SURROUND SOUND” on page 15.)
The sound from the component connected to the		“MUTE” will flicker.
selected digital input can be heard regardless of the		To resume the previous sound level, press it again.
selected input source.
5	Operate the selected component for	To listen with the headphones.
	playback.	9
		PHONES

To playback the program sources in surround sound, refer to “ENJOYING SURROUND SOUND” on page 15.

6	Adjust the (overall) volume.
			Press the SPEAKER button to off.
			When listening to a DTS or Dolby Digital program
	MASTER VOLUME		source, if the headphones are plugged in and the
			SPEAKER button is set to off, the 2-CH downmix
	or		mode will be selected automatically. (For details,
		MASTER	refer to “Downmixing into 2 front channels”on page
			18.)
DOWN	UP

12