Sherwood RD-7103 manual Introduction, Unpacking and Installation

Page 2

ENGLISH

Introduction

UNPACKING AND INSTALLATION

Congratulations on Your Purchase!

Your new high fidelity receiver is designed to deliver maximum enjoyment and years of trouble free service. Please take a few moments to read this manual thoroughly. It will explain the features and operation of your unit and help ensure a trouble free installation. Please unpack your unit carefully. We recommend that you save the carton and packing material. They will be helpful if you ever need to move your unit and may be required if you ever need to return it for service. Your unit is designed to be placed in a horizontal position and it is important to allow at least two inches of space behind your unit for adequate ventilation and cabling convenience.

To avoid damage, never place the unit near radiators, in front of heating vents, in direct sunlight, or in excessively humid or dusty locations. Connect your complementary components as illustrated in the following section.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

Caution : Do not block ventilation openings or stack other equipment on the top.

FOR U.S.A.

Note to CATV System Installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Caution regarding placement (Except for U.S.A. and Canada)

To maintain proper ventilation, be sure to leave a space around the unit (from

the largest outer dimensions including projections) equal to, or greater than, shown below.

Left and right panels: 5 cm

Rear panel: 10 cm

Top panel: 20 cm

2

Image 2
Contents RD-7103 Unpacking and Installation IntroductionRead this Before Operating Your Unit Contents Connecting Antennas System ConnectionsConnecting Digital Inputs Connecting Speakers Connecting System Control Digital Input Button Indicator Power Switch Stereo Button Front Panel ControlsTest Tone Button Stereo Button Remote Control Operation Range Loading BatteriesOperations Before operationInput source Adjusting the tonebass and treble Surround modes Delay timeSurround Sound Speaker placement Enjoying Surround SoundAdjusting the speaker settings Adjusting each channel level Dolby Digital or Dolby Pro LogicDownmixing into 2 front channels Presetting radio stations Auto tuningManual tuning Listening to Radio BroadcastsTuning to preset stations Memory Backup FunctionRecording with Tape Monitor Dubbing the audio and video signalsRecording Dubbing from video components ontoOther Functions Operating the sleep timerAdjusting the brightness of the fluorescent displays Troubleshooting Guide Problem Possible Cause RemedySpecifications Amplifier SectionRD-7103

RD-7103 specifications

The Sherwood RD-7103 is a versatile and highly regarded audio receiver that brings a blend of classic design, cutting-edge technologies, and robust performance to the home audio experience. As a part of Sherwood's longstanding heritage in high-fidelity audio equipment, the RD-7103 has garnered attention for its rich sound reproduction and user-friendly functionalities.

At the heart of the RD-7103 lies its powerful amplification system, delivering 100 watts per channel, which ensures that it can easily fill a room with crisp and clear sound. This receiver is equipped with a high-quality AM/FM tuner that provides a wide array of radio options, ensuring that users can enjoy their favorite local and national channels with exceptional clarity.

One of the standout features of the RD-7103 is its compatibility with a range of audio sources. It offers multiple input options, including standard stereo RCA inputs, as well as dedicated inputs for CD players, turntables, and tape decks. This versatility makes it a suitable choice for different audio setups, catering to both modern devices and vintage equipment.

The RD-7103 also incorporates advanced sound processing technologies to enhance the listening experience. With built-in Equalization controls, users have the ability to customize the audio output to better suit their acoustic environment or personal preferences. Furthermore, the receiver includes a headphone output, allowing for private listening without disturbing others.

In terms of build quality, the Sherwood RD-7103 features a robust construction that not only contributes to its durability but also minimizes resonance and distortion. The classic design, highlighted by a user-friendly front panel and clear display, complements any audio setup and makes it easy to navigate through various functions.

Another important aspect of this receiver is its energy efficiency. The RD-7103 is designed to reduce power consumption while still delivering optimal performance, making it an environmentally friendly choice in the realm of audio equipment.

In summary, the Sherwood RD-7103 stands out as a well-rounded audio receiver, perfect for both casual listeners and audiophiles alike. With its powerful amplification, versatile connectivity options, and user-friendly features, it is an excellent addition to any home audio system. Whether listening to vinyl records, streaming music, or enjoying a favorite radio station, the RD-7103 ensures that the listening experience is immersive and enjoyable.