Sherwood RX-4100 manual Troubleshooting Guide, Problem Possible Cause Remedy

Page 15

Troubleshooting Guide

If a fault occurs, run through the table below before taking your receiver for repair.

If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you repair the receiver yourself as this could invalidate the warranty.

PROBLEM

POSSIBLE CAUSE

REMEDY

No power

• The AC input cord is disconnected.

• Connect the cord securely.

 

• Poor connection at AC wall outlet or the

• Check the outlet using a lamp or another

 

outlet is inactive.

appliance.

 

 

 

No sound

• The speaker cords are disconnected.

• Check the speaker connections.

 

• The volume is adjusted too low.

• Adjust the volume.

 

• The MUTE button on the remote control

• Press the MUTE button to cancel the

 

is pressed to ON.

muting effect.

 

• Speakers are not switched on.

• Press the SPEAKER A or B button to ON.

 

• Incorrect selection of the input source.

• Select the desired input source correctly.

 

• Incorrect connections between the

• Make connections correctly.

 

components.

 

 

 

 

Stations cannot be received

• No antenna is connected.

• Connect an antenna.

 

• The desired station frequency is not tuned

• Tune in the desired station frequency.

 

in.

• Move the antenna and retry tuning.

 

• The antenna is in wrong position.

 

 

 

Preset stations cannot be

• An incorrect station frequency has been

• Memorize the correct station frequency.

received

memorized.

• Memorize the stations again.

 

• The memorized stations are cleared.

 

 

 

Poor FM reception

• No antenna is connected.

• Connect an antenna.

 

• The antenna is not positioned for the best

• Change the position of the antenna.

 

reception.

 

 

 

 

Continuous hissing noise

• Weak signals.

• Change the position of the antenna.

during FM reception,

 

• Install an outdoor antenna.

especially when a stereo

 

 

broadcast is received.

 

 

 

 

 

Continuous or intermittent

• Noise is caused by motors, fluorescent

• Keep the receiver away from noise

hissing noise during AM

lamps or lightning, etc.

sources.

reception, especially at night.

 

• Install an outdoor AM antenna.

 

 

 

No recording

• Incorrect selection between the

• Make connections correctly.

 

components.

 

 

• Incorrect operation of each component

• Operate each component correctly.

 

for playback and recording.

 

 

 

 

Remote control unit does

• Batteries are not loaded or exhausted.

• Replace the batteries.

not operate.

• The remote sensor is obstructed.

• Remove the obstacle.

 

 

 

ENGLISH

1 5

Page 14 Page 16
Image 15
Page 14 Page 16
Contents RX-4100 FCC Information IntroductionAC Voltage Selection Read this Before OperatingContents System Connections Connecting AUDIO/VIDEO Components Connecting AntennasAC Input Cord Connecting SpeakersFront Panel & Remote Controls For details, see the next Press this button to store preset stationsThis receives the signals from the remote control unit Press the button to select the desired input sourceLoad two batteries matching the polarity Remove the coverOperations Listening to a ProgramEach time the FM/AM button on the front panel or Adjusting the sound volume balance Adjusting the tonebass and trebleListening to Radio Auto tuningManual tuning Presetting radio stationsTuning to preset stations Other Functions Operating the sleep timerAdjusting the brightness of the unit’s fluorescent display RecordingProblem Possible Cause Remedy Troubleshooting GuideSpecifications RX-4100

RX-4100 specifications

The Sherwood RX-4100 is a remarkable receiver designed to offer both performance and versatility for audio enthusiasts. Featuring a sleek design and an intuitive layout, this receiver is perfect for home theater setups, as well as for those who simply appreciate high-quality sound.

One of the standout features of the RX-4100 is its impressive power output. With a robust 100 watts per channel, this receiver ensures that users can enjoy audio at significant volumes without sacrificing sound quality. The RX-4100 also offers a dynamic range that enhances the listening experience, making it ideal for everything from movies to music.

The RX-4100 incorporates advanced audio technologies, including Dolby Digital and DTS support, which are essential for delivering an enhanced surround sound experience. These formats help to create a multi-dimensional audio environment, allowing sound to come from all directions, immersing the listener in the action.

Connectivity is another highlight of the RX-4100. The unit comes equipped with multiple HDMI inputs, which allow for easy connection of various devices such as Blu-ray players, gaming consoles, and streaming devices. The HDMI input also supports Audio Return Channel (ARC), enabling seamless audio streaming from your TV back to the receiver.

In addition to HDMI, the RX-4100 features a range of other inputs, including optical and coaxial digital audio inputs, as well as traditional RCA inputs for connecting legacy devices. This versatility ensures that users have plenty of options when it comes to connecting their audio sources.

The RX-4100 also includes a built-in AM/FM tuner, providing access to a multitude of radio stations. Users can save their favorite stations for easy access, making it convenient to switch between music sources.

Furthermore, the unit is designed with an easy-to-navigate user interface. The remote control is well laid out, allowing users to access settings and features without frustration.

Finally, the RX-4100 is equipped with protection circuitry that helps prevent damage to the receiver and connected speakers, ensuring longevity and reliable performance over time.

In summary, the Sherwood RX-4100 offers powerful sound, advanced audio technologies, and extensive connectivity options, making it a great choice for anyone looking to elevate their home audio experience.
Top Page Image Contents