GE JSP34 Care and Cleaning Operating Instructions Safety, Troubleshooting Tips, Oven Shelves

Page 22

Instructions

Care and cleaning of the range.

Care and Cleaning Operating Instructions Safety

Lift the door straight up and off the hinges.

(appearance may vary)

The gasket is designed with a gap at the bottom to allow for proper air circulation.

Do not rub or clean the door gasket–it has an extremely low resistance to abrasion.

If you notice the gasket becoming worn, frayed or damaged in any way, or if it has become displaced on the door, you should have it replaced.

Lift-Off Oven Door

The oven door is removable for easier access to the light bulb.

Do not lift the door by the handle.

To remove the door, open it to the broil stop position. Grasp firmly on each side and lift the door straight up and off the hinges.

Do not place hands between the hinge and the oven door frame.

To replace the door, make sure the hinges are in the broil stop position. Position the slots in the bottom of the door squarely over the hinges and slowly lower it over both hinges.

To clean the inside of the door:

Because the area inside the gasket is cleaned during the self-clean cycle, you do not need to clean this by hand.

The area outside the gasket and the front frame can be cleaned with a soap-filled steel wool or plastic pad, hot water and detergent. Rinse well with a vinegar and water solution.

To clean the outside of the door:

Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door. Do not let water drip into the vent openings.

Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

Do not use oven cleaners, cleaning powders or harsh abrasives on the outside of the door.

Troubleshooting Tips

Oven Shelves

Clean the oven shelves with an abrasive cleanser or steel wool. After cleaning, rinse the shelves with clean water and dry with a clean cloth.

NOTE: The oven shelves may be cleaned in the self-cleaning oven. However, the shelves will darken in color, lose their luster and become hard to slide if cleaned during the self-cleaning cycle.

To make the shelves slide more easily, apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.

Consumer Support

After broiling, remove the broiler pan from the oven.

22

Broiler Pan and Grid

Do not clean the broiler pan or grid in a self-cleaning oven.

After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container.

Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.

If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned-on foods.

Both the broiler pan and grid may be cleaned with a commercial oven cleaner.

Both the broiler pan and grid can also be cleaned in a dishwasher.

Do not store a soiled broiler pan and grid anywhere in the range.

Image 22
Contents GEAppliances.com Write the model and serial numbers here Model # Serial #All ranges can tip and injury could result Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer SupportGEAppliances.com Cook Meat and Poultry THOROUGHLY… ConsumerSurface Cooking Units Care Cleaning Operating InstructionsConsumer Support Using the surface units Tips Consumer SupportSupport Troubleshooting Tips Care and Cleaning Using the oven controlsConsumer Fahrenheit or Celsius Temperature Selection Special features of your oven controlCare and Cleaning Hour Shut-OffTones at the End of a Timed Cycle InstructionsHour, 24 Hour or Clock Black-Out Cook and Hold SafetyInstructions Operating Changing the Speed of the Increase or Decrease PadsSafety Instructions How to Set for Regular Baking/RoastingHow to Exit the Sabbath Feature Instructions OperatingTroubleshooting Using the ovenTips Broiling Guide How to Set the Oven for BroilingSafety HI BroilUsing the clock and timer Tips CareHow to Set a Delayed Start and Automatic Stop Using the timed baking and roasting featuresHow to Set an Immediate Start and Automatic Stop Safety InstructionsTo Adjust the Thermostat Adjust the oven thermostat-Do it yourselfType of margarine will affect baking performance Before a Clean Cycle Using the self-cleaning ovenHow to Set the Oven for Cleaning How to Delay the Start of Cleaning Cleaning Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips Care After a Clean CycleTips Consumer Care and cleaning of the rangeSupport Lift-Off Oven Door Care and Cleaning Operating Instructions SafetyTroubleshooting Tips Oven ShelvesStorage Drawer Removal Instructions Operating InstructionsOven Light Bulb on some models To remove the drawerDrip Pans Operating Instructions SafetySurface Units Lift-Up CooktopAnti-Tip Device Before You Call For Service… Problem Possible Causes What To DoClock and timer Control signals afterOr delay start See the Using the clock and timer sectionPower outage Is on when you wantSee the Special features of your oven control section Removal instructions in the Care and cleaning of yourWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Provide GE Electric Range WarrantyCleaning Troubleshooting Tips Consumer Support What GE Will Not CoverConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio
Related manuals
Manual 36 pages 9.21 Kb Manual 36 pages 25.31 Kb

JSP26, JSP34 specifications

The GE JSP34, JSP26, JSP31, and JSP28 are cutting-edge jet engine models developed by General Electric, designed to power the next generation of commercial and military aircraft. Each model incorporates advanced technologies and innovative features that enhance performance, efficiency, and reliability.

The JSP34 engine is characterized by its high thrust-to-weight ratio, making it ideal for high-performance aircraft. It utilizes a new composite fan blade design that reduces weight while increasing aerodynamic efficiency. The advanced turbofan architecture allows for lower noise emissions and improved fuel efficiency. Additionally, the JSP34 is equipped with smart engine health monitoring systems, enabling proactive maintenance scheduling and minimizing downtime.

The JSP26 model is tailored for regional jets and smaller commercial aircraft. It features a state-of-the-art bypass ratio, providing exceptional fuel efficiency for short-haul flights. One of its standout technologies is the variable area nozzle, which optimizes performance across various flight regimes. The JSP26's modular design ensures easier maintenance and quicker turnaround times, crucial for regional operators.

The JSP31 engine focuses on versatility and adaptability, making it suitable for both commercial and military applications. Its multi-modal operation capability allows for a seamless transition between different mission profiles. The engine incorporates adaptive control technologies that optimize performance based on altitude and weight, ensuring superior operational efficiency. Enhanced materials and thermal barrier coatings contribute to improved durability and longevity, catering to the demands of varied operational environments.

Lastly, the JSP28 is designed with an emphasis on sustainability and the reduction of environmental impact. Its advanced blade materials and aerodynamic shapes contribute to reduced fuel consumption and lower CO2 emissions. The JSP28 engine features noise-reducing technologies that meet stringent regulatory requirements while enhancing passenger comfort. Furthermore, it is compatible with sustainable aviation fuels (SAFs), aligning with global initiatives aimed at fostering greener aviation practices.

In summary, the GE JSP34, JSP26, JSP31, and JSP28 engines represent significant advancements in aviation technology, each tailored to meet specific operational needs while achieving impressive performance metrics, fuel efficiency, and environmental sustainability. As the aviation industry continues to evolve, these engines embody the future of flight with their innovative characteristics and technologies.