Roland VS-CDRII owner manual 4$9,79, Ulwlqjdq$Xglr, 6HWXS, Dfnxswr

PTSVNWU®
*'￿￿￿&;;			￿%:7-4$9,79
56￿ID;F;@9￿EKEF7?
8AD￿F:7￿*'￿￿￿￿￿
,W•V￿D￿)DFWw		:ULWLQJ￿DQ￿$XGLR￿&'
The VS-CDRII CD Recorder System is a complete		Use the following procedure to write an audio CD
hardware solution that provides users the ability to
		with the VS-1680:
burn audio CDs and perform data backups directly
		1. Insert a blank CD-R disc into the VS-CDRII.
from the VS-1680. You can now record, edit, mix,
	2.		Hold SHIFT and press F1 [SONG] to display the
apply effects, and master to CD entirely in the digital
			Song menu. Press PAGE to display “CD Wt”
domain. The VS-CDRII also functions as a CD-ROM
			above the F3 key, then press F3 [CD Wt].
player and writer for Macintosh and IBM compatible
	3.		“CD-R Write Ready?” is displayed. Press YES.
computers. Features include:
		4. “STORE Current?” is displayed, Press NO if the
• Burn CDs directly from selected VS-Workstations
			current song is a demo song or if the Song
• CD archiving of song data provides an inexpensive
			Protect feature is active, otherwise press YES.
backup medium
		5. Tracks 15-16 and 16-16 are the default tracks to
• Includes Adaptec ToastTM CD-R software for
			be written to CD-R. If you wish to change these,
Macintosh and Easy CD CreatorTM CD-R software
			CURSOR to the “L-ch source track” and “R-ch
for PC platforms
			source track” boxes and use the VALUE dial to
*All trademarks are the property of their respective owners.			select the desired tracks to be written to the CD.
		6. CURSOR to Write Method and use the VALUE
			dial to select “Disk at Once.”
6HWXS		7. CURSOR to CD Speed and use the VALUE dial
Use the following procedure to set up the VS-1680			to select the desired speed.
		8. Press F4 [EXEC], then press YES/ENTER three
for use with the VS-CDRII:			times to begin writing the song.

1.	With all equipment turned off, connect either
	SCSI port of the VS-CDRII to the SCSI port of the		Note: When you select “Disk at Once,“ the finalize
	VS-1680.		option is automatically turned on. For more
2.	If you are connecting only the VS-CDRII to your		information on using the “Track at Once” feature, see
	VS-1680, make sure the termination switch on		pages 120-127 in the VS-1680 Owner’s Manual.
	the back of the VS-CDRII is set to the “on”
	position (switch to the left) and the mode switch		%DFNXS￿WR￿&'
	is set to the “off” position (switch to the right). If
	you are using multiple SCSI devices, connect		Use the following procedure to perform a data
	them to the CD-R drive and only terminate the
			backup on the VS-1680:
	last device in the chain.
			1. Insert a blank CD-R disk into the VS-CDRII.
3.	Set the ID numbers of each SCSI device so that
			2. Hold SHIFT and press F6 [UTILITY]. Press PAGE
	they do not conflict (VS-series workstations
				to display “CDRBk” above the F2 key. Press F2.
	default to SCSI ID #7).
			3. CURSOR to highlight a song title, and press F3
4.	Turn on the power in the following order:
				[MARK] to select that song to backup.
	VS-CDRII, VS-1680, then audio equipment.
			4. CURSOR to +Verify and use the TIME/VALUE
Note: The current VS-CDRII requires the VS-1680 to				dial to select “ON.”
			5. CURSOR to CD Speed and use the
have at least the system version v2.010. If you need
				TIME/VALUE dial to select the backup speed.
to update your VS-workstation, you can obtain these
			6.	Press F4 [EXEC]. “Backup to CD-R <SCSIx>
files along with updating instructions from the Roland
				Sure?” is displayed. Press YES.
7%6￿￿￿
		À￿￿￿￿5RODQG&RUSRUDWLRQ8￿6￿￿￿￿￿￿6￿(DVWHUQ$YH￿￿/RVfor $aQJHOHVrewritable&$￿￿￿￿￿CD (CD-RW).			)D[EDFN￿￿￿￿￿￿3DJH￿
US Website (www.rolandus.com) or by calling our			7.	“Store Current?” is displayed. Press NO if the
Product Support department at 323-890-3741.				current song is a demo song or if the Song Protect

feature is active, otherwise press YES.

NOTE: Backup can only be performed at the x2 rate