Using the oven, Oven Temperature Control

Instructions

Using the oven.

The OVEN TEMP knob is located on the control panel on the front of the range.

Safety

Operating	Instructions

OVEN TEMP

OFF

			B
			R
			OI
			L
0				50
0				0
2
2			04	5
50
0	0		40
0		3	0
			350
			350

Oven Temperature Control

To use the oven, simply turn the knob to the desired cooking temperatures, which are marked in 25°F increments on the dial. OVEN TEMP maintains the temperature you set, from 200°F to BROIL.

The Oven Cycling Light glows until the oven reaches your selected temperature, then goes off and on with the oven unit(s) during cooking.

Oven Shelves

Care and Cleaning

The shelves are designed with stop-locks so when placed correctly on the shelf supports, they will stop before coming completely out of the oven and will not tilt when you are removing food from them or placing food on them.

When placing cookware on a shelf, pull the shelf out to the bump on the shelf support. Place the cookware on the shelf, then slide the shelf back into the oven. This will eliminate reaching into the hot oven.

To remove the shelves from the oven, pull them toward you, tilt front end upward and pull them out.

To replace, place shelf on shelf support with stop-locks (curved extension of shelf) facing up and toward back of oven. Tilt up front and push shelf toward back of oven until it goes past the bump on the shelf support. Then lower front of shelf and push it all the way back.

Installation	Instructions
Troubleshooting Tips
Consumer Support

The oven has 4 shelf positions.

Oven Shelf Positions

The oven has four shelf supports—A(bottom), B, C and D (top).

Shelf positions for cooking are suggested on Baking and Roasting pages.

Use of Aluminum Foil

If desired, a sheet of aluminum foil may be used on the floor of the oven under the bake element.

Be certain foil does not touch bake

element. Aluminum foil used in this way may slightly affect the browning of some foods. Change foil when it becomes soiled.

DO NOT place a sheet of aluminum foil on the shelf. To do so may result in improperly cooked foods, damage to oven finish and increase in heat on outside surfaces of the oven.

You may use aluminum foil to line the broiler pan and broiler grid. However, you must mold the foil tightly to the grid and cut slits in it just like the grid.

JCAS 730 specifications

The GE JCAS 730 is an advanced jet engine specifically designed for modern commercial aircraft. Renowned for its efficiency and reliability, the JCAS 730 is a product of General Electric's extensive expertise in aerospace technology, catering to the growing demand for greener and more economical aviation solutions.

One of the main features of the GE JCAS 730 is its high bypass ratio, which significantly enhances fuel efficiency. The engine’s design allows for a larger volume of air to bypass the core engine, reducing the overall fuel consumption while maintaining optimal thrust levels. This characteristic makes the JCAS 730 an ideal choice for airlines focused on lowering operational costs and minimizing their carbon footprint.

Incorporating the latest in materials technology, the GE JCAS 730 utilizes carbon fiber reinforced polymers and high-temperature superalloys in its construction. These lightweight materials contribute to the engine's performance by reducing weight and improving thermal efficiency. The innovative design also aids in improving the longevity of the engine components, leading to lower maintenance costs and extended intervals between overhauls.

The JCAS 730 is equipped with state-of-the-art digital engine control systems, allowing for precise monitoring and management of engine performance. This digital architecture not only optimizes thrust during various flight phases but also enhances safety through real-time data analysis. Operators can access vital information that assists in predictive maintenance, further enhancing reliability and operational efficiency.

Another distinguishing feature of the GE JCAS 730 is its noise-reduction technology. The engine is designed with advanced acoustic liners and chevron nozzles that significantly decrease noise levels during takeoff and landing. This capability not only helps airlines comply with increasingly stringent noise regulations but also contributes to community acceptance of airport operations.

Furthermore, the JCAS 730 integrates seamlessly with advanced aircraft systems, providing pilots with enhanced situational awareness. Its compatibility with modern avionics ensures that airlines can adapt to future technological advancements without the need for major overhauls.

In conclusion, the GE JCAS 730 stands out in the competitive landscape of aviation engines due to its high efficiency, cutting-edge materials, smart digital controls, and noise-reduction capabilities. With its commitment to sustainability and performance, the JCAS 730 is positioned to meet the needs of a rapidly evolving aviation industry while setting new standards for jet engine technology.