GE 164D4290P076 owner manual Cleaning the glass cooktop, Instructions Operating Instructions

Page 25

Cleaning the glass cooktop.

GEAppliances.com

Safety

Clean your cooktop after each spill. Use CERAMA BRYTE® Ceramic Cooktop Cleaner.

Normal Daily Use Cleaning

ONLY use CERAMA BRYTE® Ceramic Cooktop Cleaner on the glass cooktop. Other creams may not be as effective.

To maintain and protect the surface of your glass cooktop, follow these steps:

Before using the cooktop for the first time, clean it with CERAMA BRYTE® Ceramic Cooktop Cleaner. This helps protect the top and makes clean-up easier.

Daily use of CERAMA BRYTE® Ceramic Cooktop Cleaner will help keep the cooktop looking new.

Shake the cleaning cream well. Apply a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner directly to the cooktop.

Use a paper towel or CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops to clean the entire cooktop surface.

Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse.

NOTE: It is very important that you DO NOT heat the cooktop until it has been cleaned thoroughly.

Instructions Operating Instructions

Use a CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops.

Burned-On Residue

WARNING: DAMAGE to your glass surface may occur if you use scrub pads other than the pad included with your range.

Allow the cooktop to cool.

Spread a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner on the entire burned residue area.

Using the included CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops, rub the residue area, applying pressure as needed.

If any residue remains, repeat the steps listed above as needed.

For additional protection, after all residue has been removed, polish the entire surface with CERAMA BRYTE® Ceramic Cooktop Cleaner and a paper towel.

Care and Cleaning

The CERAMA BRYTE® Ceramic Cooktop Scraper is available through our Parts Center. See instructions under “To Order Parts” section on next page.

NOTE: Do not use a dull or nicked blade.

Heavy, Burned-On Residue

Allow the cooktop to cool.

Use a single-edge razor blade scraper at approximately a 45° angle against the glass surface and scrape the soil. It will be necessary to apply pressure to the razor scraper in order to remove the residue.

After scraping with the razor scraper, spread a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner on the entire burned residue area. Use the CERAMA BRYTE® Cleaning Pad to remove any remaining residue.

For additional protection, after all residue has been removed, polish the entire surface with CERAMA BRYTE® Ceramic Cooktop Cleaner and a paper towel.

Troubleshooting Tips Consumer Support

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Write the model and serial numbers here Model # Serial # RangesSelf-Cleaning RadiantAll ranges can tip and injury could result GEAppliances.com Safety Instructions OperatingConsumer Safety InstructionsRadiant Surface Units Tips Care TroubleshootingConsumer Support Safety Using the surface unitsInstructions Care and Cleaning Troubleshooting Tips Consumer SupportCleaning Operating Instructions Safety InstructionsConsumer Support About the radiant surface units… Instructions Selecting types of cookwareSafety Instructions Operating Instructions Care Using the oven controlsCleaning Troubleshooting Tips Consumer Support Safety Instructions Special features of your oven controlFahrenheit or Celsius Temperature Selection Hour Shut-OffInstructions Cleaning TroubleshootingCare Troubleshooting Care and CleaningTips Before you begin…How to Set the Oven for Broiling SafetyBroiling Guide Broiling GuideConsumer Support Troubleshooting Using the clock and timerTroubleshooting Tips Consumer Support Using the timed baking and roasting featuresHow to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic StopHow to Set for Regular Baking/Roasting Consumer Support Troubleshooting TipsCleaning Troubleshooting Tips Adjust the oven thermostat-Do it yourselfTo Adjust the Thermostat SafetyOperating Instructions Safety Using the self-cleaning ovenConsumer Support Troubleshooting Tips Care and Cleaning Before a Clean CycleHow to Delay the Start of Cleaning Care and Cleaning Troubleshooting Tips Consumer SupportAfter a Clean Cycle Tips Care and Cleaning Care and cleaning of the rangeConsumer Support Painted Surfaces Safety Instructions OperatingControl Panel Lift-Off Oven DoorSupport Troubleshooting Tips Care and CleaningOperating ConsumerNormal Daily Use Cleaning Cleaning the glass cooktopInstructions Operating Instructions Burned-On ResidueMetal Marks and Scratches Instructions SafetyCooktop Seal Damage from Sugary Spills and Melted PlasticProblem Possible Causes What To Do Before You Call For Service…Before You Call For Service … During a clean cycle Cleaning of your range sectionOpen after a Clean cycle Oven not clean after See the Using the self-cleaning oven sectionDisplay goes blank Power outageDisplay flashes Unable to getSafety Instructions Operating Instructions GE Electric Range WarrantyGE Will Provide What GE Will Not CoverParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

164D4290P076 specifications

The GE 164D4290P076 is a sophisticated and highly efficient component designed for aviation applications, specifically for use in aircraft systems. This product is a part of General Electric's broad portfolio of advanced technologies that cater to the needs of modern aviation, ensuring reliability and performance under varying operational conditions.

One of the primary features of the GE 164D4290P076 is its exceptional durability. Constructed from high-quality materials, this component is capable of withstanding extreme temperatures and pressures, making it ideal for the demanding environments encountered in flight operations. This emphasis on reliability translates into reduced maintenance costs and improved safety for aircraft operators.

In terms of technology, the GE 164D4290P076 incorporates advanced electronic controls and integration capabilities. This allows for seamless communication and interoperability with other avionics systems and components within the aircraft. The design leverages cutting-edge software and hardware to ensure real-time data processing, leading to enhanced system responsiveness and performance optimization.

Another significant characteristic of the GE 164D4290P076 is its energy efficiency. The design focuses on minimizing power consumption while maximizing output, a critical consideration in today’s aviation landscape where fuel efficiency is paramount. By reducing energy waste, this component not only supports sustainability initiatives within the industry but also lowers operational costs for airline operators.

Moreover, the GE 164D4290P076 is engineered to meet stringent regulatory and safety standards prevalent in the aviation sector. Its design and performance specifications adhere to guidelines established by aviation authorities, ensuring that it qualifies for certification and can be integrated into a wide variety of aircraft models.

Lastly, support and service are integral to the GE 164D4290P076’s value proposition. General Electric provides comprehensive maintenance and technical support for this component, helping operators manage their equipment efficiently throughout its lifecycle. This availability of support not only enhances user confidence but also contributes to the component's overall reliability and effectiveness in the field.

In summary, the GE 164D4290P076 stands out as a remarkable component in the aviation sector, combining durability, advanced technology, energy efficiency, regulatory compliance, and robust support services, making it an invaluable asset for modern aircraft systems.
Top Page Image Contents