Maytag W10269529A, W10269526A warranty Range Care, Self-Cleaning Cycle

Page 10

RANGE CARE

Self-Cleaning Cycle

WARNING

Burn Hazard

Do not touch the oven during the Self-Cleaning cycle.

Keep children away from oven during

Self-Cleaning cycle.

Failure to follow these instructions can result in burns.

How the Cycle Works

IMPORTANT: The heating and cooling of porcelain on steel in the oven may result in discoloring, loss of gloss, hairline cracks and popping sounds.

Before self-cleaning, make sure the door is completely closed or the door will not lock and the self-cleaning cycle will not begin.

Once the oven has completely cooled, remove ash with a damp cloth. To avoid breaking the glass, do not apply a cool damp cloth to the inner door glass before it has completely cooled.

To stop the self-cleaning cycle at anytime, press the Cancel keypad. If the temperature is too high, the oven door will remain locked and “cool” and “locked” will be displayed.

The oven light will not function during the self-cleaning cycle.

Electronic Oven Control with Adjustable Clean Time (on some models)

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the Self-Cleaning cycle. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well-ventilated room.

Do not block the oven vent(s) during the Self-Cleaning cycle. Air must be able to move freely. Depending on your model, see “Oven Vent” section.

Do not clean, rub, damage or move the oven door gasket.

Prepare Range

Remove the broiler pan, grid, cookware and bakeware, all cooking utensils, oven racks and aluminum foil and, on some models, the temperature probe from the oven.

Use a damp cloth to clean inside door edge and the

1½" (3.8 cm) area around the inside oven cavity frame, being certain not to move or bend the gasket.

Remove plastic items from the cooktop because they may melt.

Remove all items from the storage drawer.

The SELF CLEAN self-cleaning cycle is time adjustable between 2 hours 30 minutes and 4 hours 30 minutes in 15-minute increments. Suggested clean times are 2 hours 30 minutes for light soil, and 4 hours 30 minutes for heavy soil. The last 30 minutes of the cycle is for cool down.

To Self-Clean:

1.Press SELF CLEAN.

2.Press the TEMP/TIME “+” or “-” keypads to enter the desired self-clean cycle time.

3.Press START.

The oven door will automatically lock. The DOOR LOCKED and CLEAN indicator lights will be displayed. The time remaining will also be displayed.

4.When the self-clean cycle is complete and the oven cools, the DOOR LOCKED and CLEAN indicator lights will turn off.

5.When the oven is completely cooled, remove ash with a damp cloth.

Steam Clean (on some models)

The Steam Clean feature is designed for light oven cavity bottom cleaning. Use the Steam Clean feature as soon as possible after spills occur. The longer a spill sits and dries in the oven, the more difficult it may be to remove.

Allow the range to cool to room temperature before using the Steam Clean feature. If your oven cavity is above 170°F (77°C), “HOT” will appear in the display and the Steam Clean feature will not activate until it cools down.

Remove all racks and accessories from the oven cavity.

For best results, pour 10 oz (295 mL) of distilled or filtered water onto the oven bottom.

The Steam Clean feature will take a total of 20 minutes. “End” will appear in the display at the end of the cycle.

IMPORTANT: Since the water in the oven bottom is hot, do not open the oven door during the Steam Clean cycle.

Press CANCEL at any time to end the cycle. The display will return to the time of day.

Helpful Hints

Once the Steam Clean cycle is complete, remove all remaining water and debris in the bottom of the oven with a sponge or cloth.

Wipe any remaining moisture from the oven door interior, oven cavity interior sides, and cooktop.

Use a soft brush or nylon scrubber to wipe the oven interior. This may help with more stubborn stains.

If any soil remains, run a second Steam Clean cycle to help loosen debris for easier removal.

Use the Steam Clean on small spills such as cheese or sauce from pizza or snacks, or drips from casseroles.

Food spills containing sugar, proteins or starches may require vigorous scrubbing to remove most of the debris.

It is recommended to use distilled or filtered water, as tap water may leave mineral deposits on the oven bottom. Use a cloth soaked with vinegar or lemon juice to remove any mineral deposits that may be left after the Steam Clean cycle.

If the oven is heavily soiled, use the Self-Clean cycle. The Steam Clean cycle may be used first to eliminate most of the debris, resulting in a more effective self-clean.

10

Image 10
Contents Electric Range User Instructions Range Safety Anti-Tip BracketImportant Safety Instructions Feature Guide Time, and/or shut off automatically Convection Press Convect BakeTimed cooking Bake properlyCooktop USE Cooktop On Indicator LightHot Surface Indicator Light Ceramic GlassElectronic Oven Controls Oven USEAluminum Foil Oven Vent Positioning Racks and BakewareBaking and Roasting Convection Baking and Roasting To Set a Timed Cook To Set a Delayed Timed CookBroiling Timed CookingSelf-Cleaning Cycle Range CareGeneral Cleaning Oven LightTroubleshooting Cooktop Care Kit Cooktop Scraper AccessoriesStainless Steel Cleaner and Polish Broiler PanMaytag Major Appliance Warranty This limited warranty does not coverPage W10269526A SP PN W10269529A

W10269526A, W10269529A specifications

The Maytag W10269529A and W10269526A are two high-quality replacement refrigerator water filters designed to deliver great tasting water while removing harmful contaminants. These filters are compatible with a wide range of refrigerator models, ensuring that consumers can enjoy clean water without the hassle of purchasing a new appliance.

One of the standout features of the W10269529A and W10269526A filters is their advanced filtration technology. They utilize a carbon-based method that effectively reduces common impurities such as chlorine, sediment, and various heavy metals. This is critical not just for taste but also for safety, as it ensures that the water dispensed from the refrigerator is free from substances that could potentially cause health problems.

Installation of these filters is a breeze, attributed to their user-friendly design. Typically, it involves a simple twist-and-lock mechanism, meaning that homeowners can replace filters without needing professional assistance or additional tools. This easy access encourages regular maintenance and filter changes, which are crucial for consistent water quality.

These filters also boast a considerable lifespan, with each filter capable of purifying up to 200 gallons of water before needing replacement. This longevity not only offers convenience but also translates to cost savings over time. For households that consume significant amounts of water, the ability to extend the interval between replacements is both practical and economical.

Another characteristic of both the W10269529A and W10269526A filters is their NSF certification. This certification is critical as it indicates that the filters meet rigorous standards set by the National Sanitation Foundation for public health protection, ensuring the water filtered is safe to drink.

Moreover, the design of these filters is compact, allowing them to fit seamlessly into most refrigerator models without occupying unnecessary space. This can be particularly beneficial in smaller kitchens where maximizing space is a priority.

In summary, the Maytag W10269529A and W10269526A filters combine advanced filtration technology, ease of installation, long filter life, and NSF certification to provide a reliable solution for families seeking clean, great-tasting water from their refrigerators. These features make them an excellent choice for anyone looking to improve their drinking water quality conveniently and affordably.