Troubleshooting

First try the solutions suggested here or visit our website and reference Frequently Asked Questions (FAQs)

to possibly avoid the cost of a service call.

www.maytag.com

Nothing will operate

■Is the power supply cord unplugged? Plug into a grounded outlet.

■Has a household fuse blown, or has a circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Cooktop will not operate

■Is the control knob set correctly? Push in knob before turning to a setting.

■Has a self-clean cycle been selected?

On some ceramic glass models, the cooktop will not operate during a self-clean cycle.

Excessive heat around cookware on cooktop

■Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than ½" (1.3 cm) outside the cooking area.

Cooktop cooking results not what expected

■Is the control knob set to the proper heat level? See “Cooktop Use” section.

■Is the range level?

Level the range. See the Installation Instructions.

Oven will not operate

■Is the electronic oven control set correctly? See “Electronic Oven Controls” section.

■Has a delay start been set? See “Timed Cooking” section.

■On some models, is the oven control lockout set?

See the control lock keypad feature in the “Feature Guide” section.

Oven temperature too high or too low

■Does the oven temperature calibration need adjustment? See “Oven Temperature Control” section of the “Electronic Oven Controls” section.

Oven indicator lights flash

■Do the oven indicator lights flash?

See “Control Display” in the “Electronic Oven Controls” section. If the indicator light(s) keeps flashing, call for service. See cover for contact information.

Display shows messages

■Is the display showing a flashing time?

There has been a power failure. Clear the display. On some models, reset the clock, if needed. See “Clock” keypad feature in the “Feature Guide” section.

■Is the display showing a letter followed by a number? Press the CANCEL keypad to clear the display. See “Control Display” in the “Electronic Oven Controls” section. If it reappears, call for service. See cover for contact information.

Self-Cleaning cycle will not operate

■Is the oven door open?

Close the oven door all the way.

■Has the function been entered? See “Self-Cleaning Cycle” section.

■Has a delay start been set? See “Timed Cooking” section.

Oven cooking results not what expected

■Is the range level?

Level the range. See the Installation Instructions.

■Is the proper temperature set? Double-check the recipe in a reliable cookbook.

■Is the proper oven temperature calibration set?

See “Oven Temperature Control” section of the “Electronic Oven Controls” section.

■Was the oven preheated?

See “Baking and Roasting” section.

■Are the racks positioned properly?

See “Positioning Racks and Bakeware” section.

■Is there proper air circulation around bakeware? See “Positioning Racks and Bakeware” section.

■Is the batter evenly distributed in the pan? Check that batter is level in the pan.

■Is the proper length of time being used? Adjust cooking time.

■Has the oven door been opened while cooking? Oven peeking releases oven heat and can result in longer cooking times.

■Are baked items too brown on the bottom? Move rack to higher position in the oven.

■Are pie crust edges browning early?

Use aluminum foil to cover the edge of the crust and/or reduce baking temperature.

W10239459A, W10249694A specifications

The Maytag W10249694A and W10239459A are two significant components designed to enhance the performance and efficiency of your Maytag appliances. These parts primarily serve as replacements for crucial components in various models of Maytag dishwashers and are engineered to meet high-quality standards, ensuring longevity and reliability.

The W10249694A is commonly used as a dishwasher control board. This component is essential for regulating the various functions of the dishwasher, including wash cycles, drying options, and overall operation. One of its main features is its user-friendly interface which allows for intuitive control. Additionally, it integrates advanced technology that enhances energy efficiency, making it more environmentally friendly while still delivering powerful cleaning performance. The board is meticulously designed for easy installation, minimizing downtime for users.

On the other hand, the W10239459A serves as a crucial part of the dishwasher's water inlet system. It acts as a water valve and is essential for controlling the flow of water into the dishwasher. This part ensures a consistent and adequate water supply during the washing cycle, contributing to optimal cleaning results. One of the standout characteristics of the W10239459A is its robust construction, which helps prevent leaks and ensures durability over time. This not only enhances the lifespan of the dishwasher but also improves water efficiency, preventing wastage and contributing to lower utility bills.

Both parts embody Maytag's commitment to quality, featuring materials that withstand wear and tear. They are designed to align perfectly with existing systems, ensuring seamless compatibility with various Maytag dishwasher models. In addition, these components undergo strict testing protocols to guarantee performance and reliability, further establishing Maytag's reputation for producing appliances that customers can trust.

In conclusion, the Maytag W10249694A and W10239459A are vital components that play essential roles in the operation and efficiency of Maytag dishwashers. Their advanced technologies, combined with robust construction, promote energy efficiency and reliability, making them excellent choices for anyone looking to maintain or repair their Maytag appliance. Investing in these components ensures that users will continue to enjoy exceptional cleaning performance for years to come.