Maytag W10234649A, W10239844A warranty Range Care, Timed Cooking, Self-Cleaning Cycle

Page 8

Timed Cooking

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

To Set a Timed Cook:

1.Press BAKE. The bake indicator light will light up.

2.Press the TEMP/TIME “+” or “-” keypads to enter a temperature other than the one displayed.

3.Press COOK TIME. The cook time oven indicator light will light up.

4.Press the TEMP/TIME “+” or “-” keypads to enter the length of time to cook.

5.Press START. The display will count down the time. When the time ends, the oven will shut off automatically and “End” will appear on the display.

6.Press CANCEL to clear the display.

To Set a Delayed Timed Cook:

Before setting, make sure the clock is set to the correct time of day. See the “Clock” keypad feature in the “Feature Guide” section.

1.Press BAKE.

2.Press the TEMP/TIME “+” or “-” keypads to enter a temperature other than the one displayed.

3.Press COOK TIME. The cook time oven indicator light will light up.

4.Press TEMP/TIME “+” or “-” keypads to enter the length of time to cook.

5.Press DELAY START. The delay oven indicator light will light up.

6.Press TEMP/TIME “+” or “-” keypads to enter the time of day to start.

7.Press START.

When the start time is reached, the oven will automatically turn on. The temperature and/or time settings can be changed anytime after pressing Start by repeating steps 1-7. When the set cook time ends, the oven will shut off automatically and “End” will appear on the display.

8.Press CANCEL to clear the display.

RANGE CARE

Self-Cleaning Cycle

WARNING

Burn Hazard

Do not touch the oven during the Self-Cleaning cycle.

Keep children away from oven during

Self-Cleaning cycle.

Failure to follow these instructions can result in burns.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the Self-Cleaning cycle. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well-ventilated room.

Do not block the oven vent(s) during the Self-Cleaning cycle. Air must be able to move freely. Depending on your model, see “Oven Vent” section.

Do not clean, rub, damage or move the oven door gasket.

Prepare Range

Remove the broiler pan, grid, cookware and bakeware, all cooking utensils, oven racks and aluminum foil and, on some models, the temperature probe from the oven.

Use a damp cloth to clean inside door edge and the

1½" (3.8 cm) area around the inside oven cavity frame, being certain not to move or bend the gasket.

Remove plastic items from the cooktop because they may melt.

Remove all items from the storage drawer.

How the Cycle Works

IMPORTANT: The heating and cooling of porcelain on steel in the oven may result in discoloring, loss of gloss, hairline cracks and popping sounds.

Before self-cleaning, make sure the door is completely closed or the door will not lock and the self-cleaning cycle will not begin.

Once the oven has completely cooled, remove ash with a damp cloth. To avoid breaking the glass, do not apply a cool damp cloth to the inner door glass before it has completely cooled.

To stop the self-cleaning cycle at anytime, press the Cancel keypad. If the temperature is too high the oven door will remain locked and “cool” and “locked” will be displayed. The cooling fan may continue to run.

Once the cleaning temperature has been reached, the electronic control requires a 12-hour delay before another self-clean cycle can be started.

The oven light will not function during the self-cleaning cycle.

Electronic Oven Control with Adjustable Clean Time

The SELF CLEAN self-cleaning cycle is time adjustable between 2 hours 30 minutes and 4 hours 30 minutes in 15-minute increments. Suggested clean times are 2 hours 30 minutes for light soil, and 4 hours 30 minutes for heavy soil. The last 30 minutes of the cycle is for cool down.

To Self-Clean:

1.Press SELF CLEAN.

2.Press the TEMP/TIME “+” or “-” arrow pads to enter the desired self-clean cycle time.

3.Press START.

The oven door will automatically lock. The DOOR LOCKED and CLEAN indicator lights will be displayed. The time remaining will also be displayed.

4.When the self-clean cycle is complete and the oven cools, the DOOR LOCKED and CLEAN indicator lights will turn off.

5.When the oven is completely cooled, remove ash with a damp cloth.

8

Image 8
Contents GAS Range User Instructions Range Safety Your safety and the safety of others are very importantFor self-cleaning ranges Anti-Tip BracketFeature Guide Power Failure Cooktop USESealed Surface Burners To SetAluminum Foil Oven USEElectronic Oven Controls Positioning Racks and Bakeware Oven VentBaking and Roasting BroilingTimed Cooking Self-Cleaning CycleRange Care General Cleaning Oven LightExterior Porcelain Enamel Surfaces on some Stainless Steel on some modelsTroubleshooting Accessories Maytag Major Appliance Warranty Limited WarrantyItems Excluded from Warranty This limited warranty does not coverPage Instructions Dutilisation DE LA Cuisinière À GAZ Sécurité DE LA Cuisinière Votre sécurité et celle des autres est très importanteLa bride antibasculement Cuisinière autonettoyanteGuide DES Caractéristiques Clavier Caractéristique Instructions Oven LightLampe de la cavité Lampe du four Du fourUtilisation DE LA Table DE Cuisson RéglagePanne de courant Clavier Caractéristique Instructions Keep WarmBrûleurs de surface scellés NettoyageCommandes électroniques du four Utilisation DU FourPapier d’aluminium Positionnement des grilles et des ustensiles de cuissonÉvent du four Cuisson au four et rôtissageCuisson au gril Système de gestion de la température Precise BakeProgramme d’autonettoyage Entretien DE LA CuisinièreCuisson minutée Nettoyage général AutonettoyageSurfaces EN Émail Vitrifié Uniquement sur certains Méthode de nettoyageDépannage Lampe du fourLe four ne fonctionne pas Les flammes du brûleur du four sont jaunes ou bruyantesLa température du four est trop élevée ou trop basse Des messages saffichentAccessoires Nettoyant et poli pour acier inoxydableLèchefrite Nettoyant tout-usage pour appareils ménagersPage W10234649A SP PN W10239844A

W10239844A, W10234649A specifications

The Maytag W10234649A and W10239844A are two prominent appliance components that represent advanced engineering and design in modern home kitchen technology. These models primarily serve as essential parts in the user experience, ensuring reliability and efficiency in daily tasks.

The Maytag W10234649A is primarily recognized as a high-quality dishwasher spray arm. This part is specifically designed to enhance the performance of dishwashing units by distributing water effectively throughout the dishwasher interior. One of its notable features is its robust construction, aimed at withstanding high-pressure water flows while preventing clogs and leaks. The spray arm utilizes a unique design that rotates smoothly, ensuring thorough cleaning of dishes from multiple angles, thus maximizing the washing coverage and minimizing the need for pre-rinsing.

On the other hand, the W10239844A is renowned as a dishwasher door latch assembly. This vital component plays a significant role in ensuring the safe operation of the dishwasher. It secures the door during washing cycles, preventing any leaks and maintaining the unit’s efficiency. The door latch features a user-friendly design that allows for easy installation and replacement. Constructed from durable materials, it guarantees longevity and reliability, even with frequent use. The W10239844A is designed to comply with safety standards, providing peace of mind and ensuring that the dishwasher operates effectively without interruptions.

Both the W10234649A and W10239844A reflect Maytag's commitment to innovation and quality. They are engineered for compatibility with a variety of Maytag dishwasher models, making them versatile choices for users looking to replace worn parts or improve their kitchen appliance's performance. Their ease of installation and strong build quality not only enhance the functionality of the dishwashers but also contribute to Maytag's reputation for producing long-lasting, reliable home appliances.

In conclusion, whether you're looking at the W10234649A spray arm or the W10239844A door latch assembly, both parts exemplify the spirit of Maytag's design philosophy, prioritizing efficiency, durability, and user satisfaction in every home. These components ensure that your dishwashing experience is seamless and effective, allowing you to focus on what truly matters—enjoying time with family and friends.