Maytag W10234650A General Cleaning, Oven Light, Exterior Porcelain Enamel Surfaces on some

Page 9

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Always follow label instructions on cleaning products. For additional information, you can visit the Customer Service section of our website at www.maytag.com.

Soap, water and a soft cloth or sponge are suggested first unless otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES (on some

models)

Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the entire range is cool. These spills may affect the finish.

Cleaning Method:

Glass cleaner, mild liquid cleaner or nonabrasive scrubbing pad:

Gently clean around the model and serial number plate because scrubbing may remove numbers.

All-Purpose Appliance Cleaner Part Number 31682 (not included):

See cover for contact information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner, steel-wool pads, gritty washcloths or abrasive paper towels.

Damage may occur to stainless steel surfaces, even with one-time or limited use.

Cleaning Method:

Rub in direction of grain to avoid damaging.

Stainless Steel Cleaner and Polish Part Number 31462: See cover for contact information.

Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust removers, ammonia or sodium hydroxide (lye) because paint surface may stain.

PORCELAIN-COATED GRATES AND CAPS

Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the cooktop, grates and caps are cool. These spills may affect the finish.

To avoid chipping, do not bang grates and caps against each other or hard surfaces such as cast iron cookware.

Do not reassemble caps on burners while wet. Do not clean in the Self-Cleaning cycle.

Cleaning Method:

Nonabrasive plastic scrubbing pad and mildly abrasive cleanser:

Clean as soon as cooktop, grates and caps are cool.

Dishwasher (grates only, not caps):

Use the most aggressive cycle. Cooked-on soils should be soaked or scrubbed before going into a dishwasher.

Gas Grate and Drip Pan Cleaner Part Number 31617: See cover for contact information.

SURFACE BURNERS

See “Sealed Surface Burners” section.

COOKTOP CONTROLS

To avoid damage to the cooktop controls, do not use steel wool, abrasive cleansers or oven cleaner.

Do not soak knobs. When replacing knobs, make sure knobs are in the OFF position.

On some models, do not remove seals under knobs.

Cleaning Method:

Soap and water:

Pull knobs straight away from control panel to remove.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive cleaners, steel-wool pads, gritty washcloths or abrasive paper towels.

Cleaning Method:

Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on panel.

All-Purpose Appliance Cleaner Part Number 31682 (not included):

See cover for contact information.

OVEN RACKS

Cleaning Method:

Steel-wool pad

For racks that have discolored and are harder to slide, a light coating of vegetable oil applied to the rack guides will help them slide.

STORAGE DRAWER

Check that storage drawer is cool and empty before cleaning.

Cleaning Method:

Mild detergent

The oven light is a standard 40-watt appliance bulb. Before replacing, make sure the oven and cooktop are cool and the control knobs are in the off position.

To Replace:

1.Unplug range or disconnect power.

Oven Light

2.Turn the glass bulb cover in the back of the oven counterclockwise to remove.

3.Turn bulb counterclockwise to remove from socket.

4.Replace bulb, then bulb cover by turning clockwise.

5.Plug in range or reconnect power.

9

Image 9
Contents GAS Range User Instructions Your safety and the safety of others are very important Range SafetyAnti-Tip Bracket Important Safety InstructionsFeature Guide Cooktop USE Power FailureSealed Surface Burners To SetElectronic Oven Controls Oven USEPositioning Racks and Bakeware Aluminum FoilOven Vent Baking and RoastingSelf-Cleaning Cycle Range CareTimed Cooking Oven Light General CleaningExterior Porcelain Enamel Surfaces on some Stainless Steel on some modelsTroubleshooting Accessories Limited Warranty Maytag Major Appliance WarrantyItems Excluded from Warranty Disclaimer of Implied Warranties Limitation of Remedies

W10234650A specifications

The Maytag W10234650A is a highly sought-after appliance part, primarily known as a dishwasher upper spray arm. This essential component plays a critical role in ensuring the efficient operation of a dishwasher, delivering powerful water jets that rinse dishes, pots, and pans thoroughly for optimal cleaning performance.

One of the standout features of the Maytag W10234650A is its durability. Constructed with high-quality materials, this upper spray arm is designed to withstand the rigors of regular use in a busy kitchen environment. Its robust design helps prevent wear and tear, allowing it to function effectively over an extended period.

The technology behind the W10234650A spray arm focuses on maximizing water distribution. With multiple strategically positioned spray nozzles, this component ensures that water reaches every corner of the dishwasher. This design promotes a more consistent and thorough cleaning experience, minimizing the chances of food residues being left behind on dishes.

Another important characteristic of the Maytag W10234650A is its compatibility with various models of Maytag and some Whirlpool dishwashers. This versatility makes it a practical choice for homeowners looking to maintain the longevity of their appliances without having to purchase a new dishwasher. When replacing an old or damaged spray arm, users can rest assured that the W10234650A will integrate seamlessly, restoring the dishwasher's performance.

Installation of the Maytag W10234650A is straightforward, allowing users to easily replace the part without the need for professional assistance. This user-friendly aspect empowers homeowners to take charge of their appliance maintenance, ensuring their dishwasher operates efficiently.

In summary, the Maytag W10234650A upper spray arm stands out for its durable build, advanced water distribution technology, and compatibility with various dishwasher models. It serves as an excellent solution for improving dishwasher performance, making it an invaluable component for anyone seeking to enhance their dishwashing experience. With its combination of quality and efficiency, the W10234650A is a reliable choice for maintaining the effectiveness of Maytag dishwashers over time.