RH oven

SERVICING - WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

4. To Remove a Side Panel

Disconnect from electricity supply.

Remove control panel (see 2). Pull the cooker forward. Remove the 4 retaining screws for each panel (2 at the front and 2 at the rear). The lower front retaining screws (one each side) are situated beneath the lower edge at the front corners of the side panels

Reassemble in reverse order.

5. To Remove Oven Light Switch

Remove control panel (see 2).

NB The old switch may be destroyed during removal.

Remove switch button and old switch from its bezel by gripping the switch body behind the control panel and twisting sharply.

The switch bezel can then be removed by folding back its locking wings and pushing forward. Fit the new bezel to the control panel by first lining up the raised key on its body with the cutout in the control panel and pushing it in from the front. Assemble the new switch to the bezel by lining up the key sections and pushing home. Fit the new button by pushing in from the front.

Replace control panel in reverse order and test for correct operation.

6. To Remove Electronic Timer

Disconnect from electricity supply.

Pull off the timer control buttons and remove the control panel (See 2). Remove the timer/ mounting bracket assembly from the control panel by removing the two fixing screws. Remove the timer from its mounting bracket by depressing the plastic lugs on the timer case, at the same time pulling the unit forward.

Reassemble in reverse order. When replacing leads refer to the wiring diagram. Check operation of timer.

7. To Remove A Thermostat

Remove control panel (see 2) and cooktop (see 3). Open the appropriate oven door and remove the oven shelves.

Remove oven roof. Remove the two fixings that secure the thermostat phial cover. Unclip the thermostat phial from the clips in the oven back panel & remove from the top rear of the oven.

LH oven

Remove the two screws holding the thermostat phial to the oven fan cover at the rear of the oven. Pull the unit forward to access the rear of the cooker. Remove both rear cover boxes by removing the fixing screws and lifting clear. Feed the thermostat capillary clear of the oven. Disconnect the wires from the thermostat and undo the two fixings that secure the control to the mounting plate. Fit the replacement and re- assemble in reverse order. Ensure that the phial is clipped to the oven rear, positioned centrally between the clips. Check that the thermostat functions correctly.

8. To Change Broiler Controller

Remove the control panel (see 2) and cooktop (see 3). Disconnect wiring from controller. Remove 2 screws holding switch/controller to mounting panel. Fit new controller and reassemble in reverse order. Check for correct operation.

BEFORE SERVICING ANY GAS CARRYING COMPONENTS TURN OFF GAS SUPPLY.

9. To Change Cooktop Control Valve

Remove the cooktop top, see 3. Undo the nut at rear of the valve and remove the screw(s) securing valve to gas rail. Remove old valve, discard old gasket/seal. Fit new gasket/seal to new valve.

Reassemble in reverse order. Check valve is adjusted for correct gas. Check range is gas sound.

F104010-01 specifications

The Aga Ranges F104010-01 is a culinary masterpiece designed to blend traditional craftsmanship with modern technology, offering both functionality and aesthetic appeal. With its robust construction and timeless design, this range is the centerpiece of any professional or home kitchen.

One of the standout features of the F104010-01 is its powerful cooking capabilities. Equipped with a high-performance gas burner system, it delivers precise heat control, allowing chefs to perfect their culinary creations. The oven section boasts a spacious capacity, accommodating multiple dishes simultaneously. With a true European convection system, heat is evenly distributed, resulting in perfectly roasted meats and baked goods.

The F104010-01 incorporates advanced technology, such as an intuitive digital display and programmable settings. This user-friendly interface allows for effortless navigation through various cooking modes, including bake, broil, and roasting. The built-in temperature probe is another notable feature, ensuring that your meats are cooked to perfection without the need for constant monitoring.

Durability is a key characteristic of this range. Constructed from high-quality stainless steel, it is not only resilient to the rigors of everyday use but also easy to maintain. The porcelain-coated cast iron grates provide excellent heat retention, while the heavy-duty oven door ensures a secure seal, improving heat retention and energy efficiency.

Another important aspect of the F104010-01 is its versatility. The range includes multiple burner configurations, catering to various cooking styles and preferences. Additionally, its modular design allows for customization, enabling users to select options that best suit their kitchen layout and needs.

Safety features are also a priority in the design of the F104010-01. With flame failure devices and a child lock system, it ensures peace of mind for families and professional kitchens alike.

In terms of design, the Aga Ranges F104010-01 exemplifies a classic aesthetic while incorporating modern elements. Available in several elegant finishes, it seamlessly integrates into any kitchen décor, making it as visually appealing as it is functional.

In summary, the Aga Ranges F104010-01 combines powerful cooking performance, innovative technology, and enduring design, making it an excellent choice for both home cooks and professional chefs seeking to elevate their culinary experience.