Broan QS242SS warranty For Domestic Cooking only, Table of Contents

Page 1

ALLURE® QS2 SERIES RANGE HOOD

ALLURE® QS2 SERIES RANGE HOOD

Page 1

Patent No.:

US D450, 829 S

READ AND SAVE THESE INSTRUCTIONS

! FOR DOMESTIC COOKING ONLY !

WARNING

 

CAUTION !

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1.Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty.

2.Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

3.Installation work and electrical wiring must be done by a qualified person(s) in accordance with all applicable codes and standards, includ- ing fire-rated construction codes and standards.

4.Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent backdraft- ing. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection As- sociation (NFPA), and the American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

5.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

6.To reduce the risk of fire or electric shock, do not use this range hood with an additional speed control device.

7.Ducted fans must always be vented to the outdoors.

8.To reduce the risk of fire, use only metal ductwork.

9.Use with approved cord-connection kit only.

10.This unit must be grounded.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1.Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.

2.Always turn hood ON when cooking at high heat or when cooking flaming foods.

3.Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.

4.Use proper pan size. Always use cookware appropriate for the size of the surface element.

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:*

1.SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.

2.NEVER PICK UP A FLAMING PAN — You may be burned.

3.DO NOT USE WATER, including wet dishcloths or towels - violent steam explosion will result.

4.Use an extinguisher ONLY if:

A.You know you have a Class ABC extinguisher and you already know how to operate it.

B.The fire is small and contained in the area where it started.

C.The fire department is being called.

D.You can fight the fire with your back to an exit.

*Based on “Kitchen Fire Safety Tips” published by NFPA.

1.For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

2.To avoid motor bearing damage and noisy and/or unbalanced impellers, keep drywall spray, construction dust, etc. off power unit.

3.For best capture of cooking impurities, your range hood should be mounted so that the top of the hood is 24-30” above the cooking surface.

4.Please read specification label on product for further information and requirements.

Installer: Leave this manual with the homeowner.

Homeowner: Operating and Cleaning information on page 6.

NOTE

If hood is to be installed Non-Ducted:

 

Purchase a set of (2) non-ducted filters from your

 

local distributor or retailer and attach them to the

 

aluminum mesh filters.

TABLE OF CONTENTS

This manual is divided into sections as follows:

“PREPARE HOOD LOCATION”

Run ductwork from roof or wall cap, and electrical wiring from service panel - to installation location

“PREPARE THE HOOD”

Get your hood ready for installation

“CONNECT WIRING”

Make electrical wiring connections to hood

“INSTALL HOOD”

Secure hood to cabinet and ductwork - install bulbs and filters

“OPERATION”

How to use the hood controls

“CLEANING”

Keep your hood in top working condition

“SERVICE PARTS”

Part numbers and exploded view of hood components

“WARRANTY”

One-year limited warranty and how to contact us

Page 1 Page 2
Image 1
Page 1 Page 2
Contents For Domestic Cooking only Table of ContentsPrepare the Hood Prepare Hood Location¼ X Round Duct PlateTeflon-coated bottom cover from hood ConnectorDamper/Duct ElectricalTOP Rectangular Tape TOP/BACK Edge SIDE-TO-SIDE Adjustment DamperSEMI-CIRCULAR Rear Rectangular Duct KnockoutConnect Wiring NON-DUCTED Filters CleaningOperation KEY NO. Part no Service PartsBROAN-NUTONE ONE Year Limited Warranty WarrantyContenido Para Cocinar Doméstico Solamente Advertencia PrecaucionPreparación DEL Lugar Donde Conector DEL Regulador DE TIRO/CONDUCTO Preparación DE LA CampanaGrapa DEL Cable Eléctrico Para AireTornillo Sujetadores Cinta DE Metal Placa Quite el agujero o agujeros ciegos para los conductosCon dos tornillos NotaConexión Eléctrica Instalación DE LA Campana Operación Filtros SIN ConductosLimpieza Clave N.º Pieza N.º Piezas DE ServicioGarantia BROAN-NUTONE Limitada POR UN AÑO Garantia
Related manuals
Manual 16 pages 55.99 Kb

QS242SS specifications

The Broan QS242SS is a high-quality under-cabinet range hood designed to enhance the cooking experience while keeping your kitchen fresh and smoke-free. With its sleek, modern stainless steel finish, this range hood not only performs exceptionally but also adds a touch of elegance to any kitchen décor.

One of the main features of the QS242SS is its powerful ventilation capabilities. It boasts a robust airflow of up to 300 CFM, effectively removing smoke, steam, and odors produced during cooking. It offers multiple speed settings, allowing users to select the desired level of ventilation based on the cooking activity. The quiet operation of the motor ensures that the ambiance of your kitchen remains peaceful, even at higher speeds.

In terms of design, the QS242SS features a contemporary aesthetic with a streamlined profile that easily integrates into various kitchen layouts. Its unobtrusive design helps to maintain an open feel in the kitchen, while the stainless steel material is not only visually appealing but also easy to clean and maintain.

The QS242SS is equipped with advanced technologies that enhance its functionality. For instance, it includes a dishwasher-safe aluminum mesh filter, which is designed to capture grease and particulate matter effectively. This filter is easy to remove and can be conveniently placed in the dishwasher for hassle-free cleaning. Additionally, the range hood features an integrated lighting system that illuminates your cooking surface, ensuring you have a clear view of your culinary efforts. The lighting is achieved through efficient halogen bulbs that provide bright, focused illumination.

Another characteristic of the Broan QS242SS is its versatility in installation. The range hood can be mounted under cabinets or against the wall, making it suitable for various kitchen configurations. Its adjustable height feature allows for user customization based on specific kitchen requirements.

In summary, the Broan QS242SS is an exceptional under-cabinet range hood that combines powerful performance with a stylish design. It includes multiple speeds, efficient lighting, and easy-to-clean filters, making it a perfect choice for homeowners who value both aesthetics and functionality in their kitchen appliances. As part of Broan's commitment to quality, this range hood is designed to enhance the overall cooking experience while maintaining a clean and fresh environment.
Top Page Image Contents