Bertazzoni H366GGVCR, H366GGVVI, H366GGVNE manual GAS Connection, Manual Shut-off Valve

Page 11

GAS CONNECTION

All gas connections must be made according to national and local codes. The gas supply (service) line must be the same size or greater than the inlet line of the appliance. This range uses a 1/2" NPT inlet (see fig. in this chapter for details of gas connections installations).On all pipe joints use sealant resistant to LP gas.

1.Manual Shut-off Valve:

This installer-supplied valve must be installed in the gas service line ahead of the appliance in the gas flow and in a position where it can be reached quickly in the event of an emergency. The manual shut-off valve shall be installed properly in order to be accessible when the appliance is installed.

2.Pressure Regulator(see fig. in this chapter)

a)All cooking equipment must have a pressure regulator on the incoming service line for safe and efficient operation, since service pressure may fluctuate with local demand. The pressure regulator is supplied separately with the appliance; regulator has two female threads ½” NPT; it shall be installed properly in order to be accessible when appliance is installed in final position.

b)Any conversion required must be performed by your dealer or a qualified licensed plumber or gas service company. Please provide the service person with this manual before work is started on the range. (Gas conversions are the responsibility of the dealer or end user.)

c)This range can be used with Natural or LP/Propane gas. It is shipped from the factory adjusted for use with natural gas.

d)Manifold pressure should be checked with a manometer, natural gas requires 4.0" W.c.P. and LP/Propane requires 11.0" W.C.P. Incoming line pressure upstream from the regulator must be 1" W.c.P. higher than the

manifold pressure in order to check the regulator. The regulator used on this range can withstand a maximum input pressure of 1/2 PSI (14.0" W.c.P.) If the line pressure is in excess of that amount, a step- down regulator will be required.

e)The appliance, its individuai shut-off valve, and pressure regulator must be disconnected from the gas

supply piping system during any pressure testing of that system at pressures in excess of 1/2 psig (3.45 kPa).

f)The appliance must be isolated from the gas supply piping system by closing its individuai manual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.45 kPa).

3.Flexible Connections:

a)If the unit is to be installed with flexible couplings and/or quick disconnect fittings, the installer must use a heavy-duty, AGA design-certified commerciai flexible connector of at least 1/2" (1.3 cm) ID NPT (with suitable strain reliefs) in compliance with ANSI Z21.41 and Z21.69 standards.

b)In Canada: CAN 1-6.10-88 metal connectors for gas appliances and CAN 1-6.9 M79 quick disconnect device for use with gas fuel.

CAUTlON: Leak testing of the appliance shall be conducted according to the manufacturer's instructions. Before placing the oven into operation, always check for leaks with a soapy water solution or other acceptable method. DO NOT USE AN OPEN FLAME TO CHECK FOR LEAKS!

A 2”( 5 cm)

B 3”(7,6 cm)

D 8”(20,3 cm)

A properly-grounded horizontally- mounted electrical receptacle should be installed no higher than 3" (7.6 cm) above the floor, no less than 2”( 5 cm) and no more than 8”(20,3 cm) from the right side (facing product). Check all local code requirements.

An agency-approved, properly-sized manual shut-off valve should be installed no higher than 3" (7.6 cm) above the floor and no less than 2”( 5 cm) and no more than 8”(20,3 cm) from the left side (facing product). To connect gas between shut-off valve and regulator, use agency-approved, properly sized flexible or rigid pipe. Check all local code requirements

11

Image 11
Contents Bertazzoni What to do if YOU Smell GAS Installation instructions Room ventilation Location and venting Installation Manual Backguard Installation Instruction Worktop Front Handle Installation Instructions Installation SIDE-BY-SIDE to Kitchen Cabinet Electrical Connection Cooker Hood InstallationVerify proper operation after servicing Manual Shut-off Valve GAS ConnectionPerformance CHECKLlST Replacement PartsChanging the Nozzles for USE with Other Types of GAS Regulation of Burners Models H366GGVService & Maintenance Instructions Descriptions Control Panel Description Using BurnersCorrect usage of pans Using the GAS OvenElectric ignition Convection GAS Oven Cooking Table Using the GAS Broiler After Sale Service Cleaning the ApplianceSpare Parts List Side Beige Page Page Page Page Page Page

H366GGVCR, H366GGVNE, H366GGVVI specifications

Bertazzoni, an esteemed name in the world of kitchen appliances, has long been synonymous with quality, innovation, and exceptional design. Among its various offerings, the H366GGVVI, H366GGVNE, and H366GGVCR models stand out as premium ranges that elevate the cooking experience. These models are part of Bertazzoni's Heritage series, which blends modern engineering with Italian craftsmanship, providing a perfect fusion of performance and aesthetics.

The H366GGVVI, H366GGVNE, and H366GGVCR each feature a 36-inch width, providing ample cooking space for culinary enthusiasts. These models come equipped with six powerful burners, each designed to accommodate a range of cooking styles and techniques. The burners offer precise temperature control, allowing users to simmer delicate sauces or achieve high heat for searing. The dual-ring burner feature enhances versatility, enabling chefs to switch easily between intense heat and more gentle cooking.

Each range includes an electric oven with a generous cooking capacity, featuring multiple cooking modes such as convection and broil. The convection mode ensures even heat distribution, making it ideal for baking and roasting. With a self-cleaning option, maintaining the oven's cleanliness is effortless, adding convenience to the cooking experience.

In terms of design, the H366GGVVI, H366GGVNE, and H366GGVCR showcase the hallmark Italian style Bertazzoni is known for. With sleek lines, professional knobs, and a variety of finishes available, including stainless steel, these ranges add a touch of sophistication to any kitchen. The design elements are not only aesthetically pleasing but also functional, with ergonomically designed knobs for easy operation.

Another notable characteristic is the integration of advanced safety features. These models are equipped with flame failure devices that automatically shut off the gas supply if a flame goes out, ensuring peace of mind while cooking.

In conclusion, the Bertazzoni H366GGVVI, H366GGVNE, and H366GGVCR range cookers exemplify the brand's commitment to quality and innovation. They offer a perfect blend of power, precision, and elegant design. Whether you are a home cook or a culinary professional, these ranges provide the tools needed to create exceptional meals while enhancing the beauty of your kitchen space.