BACKGUARD INSTALLATION INSTRUCTION
It’s always compulsory to installa the riser even for an island installation
1)Remove n°2 screws fixing worktop as shown in fig.1
2)Place front part of the backguard and attach it from bottom side with the two removed screws (point 2) as shown in fig .2
3)Fix the front part of the backguard with the screws supplied with the backguard kit (fig.3)
4)Assemble back part with front part of the backguard and fix them with a screws supplied with the backguard kit (fig.4)
1
2
3
4
6