INSTALLING THE LEGS
Bertazzoni ranges must be used only with the legs properly installed.
Four height‐adjustable legs are shipped with the range in the polysterene container situated over the appliance.
Before installing the legs, position the appliance near its final location as the legs are not suitable for moving the appliance over long distances.
After unpacking the range, raise it enough to insert the legs in the appropriate receptacles situated on the lower part of the appliance. Lower the range gently to keep any undue strain from legs and mounting hardware. If possible use a pallet or lift jack instead of tilting the unit.
Adjust leg height to the desired level by twisting the inside portion of the leg assembly until the proper height is reached. Check with a level that the cooktop is perfectly level.
INSTALLING THE HOB RAIL AND OVEN
HANDLE
Only model A304GGVXT
The rail and handle are packed with the upstand. The rail is only available on some models.
Assemble the hob rail and oven handle as shown in the pictures
8