Loosen and the screw V and pull out the burner from the support being careful not to damage the ignition plug and the thermocouple
Unscrew the nozzle R using a 7 mm. spanner and replace it with the nozzle for the new type of gas according to what is indicate in the table below ATTENTION: pay extra attention to avoid damage to the igniter and thermocouple.
Re‐install all the parts in revers sequence
STEP 4: BROILER BURNER
Loosen the screw and pull out the burner from the support being careful not to damage the ignition plug and the thermocouple.
Using a 7 mm [name of the tool] unscrew the nozzle. Replace the nozzle using the conversion set supplied with the range or by a Bertazzoni authorized parts warehouse. Each nozzle has a number indicating its flow diameter printed on the body. Consult the table on page 20 for matching nozzles to burners.
Adjust the gap X by setting it to fully open position.
18