Control Guide

GBC 2064WF-1

Operation Manual

		Set Temp.	Current Temp.
		TOP: 150*F	TOP: 140*F
		TOP: 150*F	TOP: 140*F
		BOT: 150*F	TOP: 145*F
		MODE: FWRD	GAP: 000%
		SPEED: 08ft	PRS: 030%

3		2	8
Top Temp		2	Reset
Top Temp			Reset
4	MASTER DIAL		7
Bottom Temp			Meas.
5		6
Speed		Cooling
9		10	11
Stop		Rear	Forward

•GAP: As the rollers are lifted, the GAP is measured digitally. The value is shown as a percentage. No GAP equals 000%, completely in the up positions equals 100%.

•PRS: PRS refers to the amount of downward pressure being applied to the Main Rollers. The value is shown as a percentage. FIGURE 5 shows the PRS is set for 30%. No Pressure will equal 000%, maximum pressure will read 100%.

2.Master Dial:

•Increases (+) or decreases (-) the numeric value for the selected setting when turned.

3.Top Temp:

•When pressed, permits increasing or decreasing of the top set temperature by turning the MASTER DIAL and is indicated on the control panel display. Range is 32°F- 300°F.

4.Bottom Temp:

•When pressed, permits increasing or decreasing of the bottom set temperature by turning the MASTER DIAL and is indicated on the control panel display. Range is 32°F- 300°F.

FIGURE 1

A. Power ON/OFF (I/O):

Located at the back left of the machine applies power to the laminator. The control panel display will illuminate when position marked “I” is pushed. The Off position, marked “O” removes power from the laminator.

B. Control Panel (FIGURE 1)

1.Main display Read out:

•Illuminates when the laminator is plugged in and POWER ON/OFF is in the on, (I), position. Displays settings for the top heater, bottom heater, speed, job mode, and ready/wait.

•TOP: Refers to the Top Main Rollers temperatures setting and Current Temperature.

•BOT: Refers to the Bottom Main Rollers temperatures setting and Current Temperature.

•MODE: Displays the Direction the rollers are set to... In FIGURE 5, the MODE is shown in the “FWRD” position.

•SPEED: Speed is displayed in Feet per Minute or ft/mn. FIGURE 5 Displays the Speed set at 8ft.

5.Speed:

•When pressed, permits increasing or decreasing of speed by turning the MASTER DIAL and is indicated on the control panel display. Range is 1-15.

6.Cooling:

•When pressed, turns on the cooling fans. When pressed again, turns off the cooling fans.

7.Measure:

•When pressed, allows the operator to view the amount of linear feet that the machine has run.

8.Reset:

•When pressed, permits the operator to rest the linear feet counter.

9.Stop:

•When pressed, the rollers will stop rotating.

10.Rear:

•When pressed, the rollers will allow the operator to run the machine in reverse or the rear.

11.Forward:

•When pressed, the rollers will allow the operator to run the machine in forward mode or from the front.

Page 8

GBC 2064WF-1 specifications

The ACCO Brands GBC 2064WF-1 is a sophisticated lamination machine that is designed to cater to the needs of both professional and personal users. As part of the GBC brand known for its high-quality laminating solutions, this model stands out with its user-friendly features and advanced technology.

One of the main features of the GBC 2064WF-1 is its ability to laminate both hot and cold pouches, providing versatility for different lamination needs. This dual functionality allows users to preserve a range of materials from professional presentations to personal craft projects. The machine accommodates various pouch sizes, making it suitable for everything from ID cards to standard letter-sized documents.

A notable characteristic of the GBC 2064WF-1 is its fast warm-up time, typically around five minutes. This efficiency ensures that users can quickly start laminating, which is particularly beneficial for busy office environments or during time-sensitive projects. The device also offers a rapid lamination speed, allowing multiple documents to be laminated in a short amount of time, thus enhancing productivity.

Incorporating advanced technology, the GBC 2064WF-1 features an auto shut-off function that enhances safety by powering down the machine after periods of inactivity. This is particularly important in environments where safety precautions are a top priority. Additionally, the machine includes a jam prevention system that minimizes the risk of document jams, which can be a common frustration in lamination processes.

Furthermore, the GBC 2064WF-1 is designed with intuitive controls and an informative LED indicator. This ensures users can easily monitor the machine’s operation status, making it accessible even for those who may not have prior experience with laminating equipment.

The sleek and compact design of the GBC 2064WF-1 is another advantage, allowing it to fit seamlessly into various workspaces without occupying too much valuable space. Its durability and robust construction also guarantee long-lasting performance, making it a worthwhile investment for individuals and businesses alike.

In conclusion, the ACCO Brands GBC 2064WF-1 is a highly capable lamination machine that combines efficiency, versatility, and safety features. Whether for administrative work, educational purposes, or creative projects, this model meets the demands of diverse users, ensuring high-quality lamination every time.