Speed / Temperature Control

GBC 2064WF-1

Operation Manual

This is only a general reference guide. Different settings may be suitable as the warm up time, lamination time and materials change.

Factors that may affect the speed and temperature parameters;

1.Image length

2.Image width and ink coverage.

3.Ink coverage

4.Paper type

5.Laminate thickness

6.Operating environment

7.Condition of the rollers

8.Line voltage (effects heaters)

9.Using cooling features.

You may have to adjust temperature or speed depending on stock finish, thickness *Turn heat off when not in use.

THE ART OF LAMINATION

BASIC RULES

•Do not attempt to laminate abrasive or metal Objects such as staples, paper clips and glitter, as they may damage the heat or pull rollers.

•Do not force items into the nip area of the heat rollers. An item that is not easily drawn into the laminator by the heat rollers is probably too thick to laminate.

•Wrinkles may result if an attempt is made to reposition an item once it has been grasped by the heat rollers.

•Do not stop the laminator before an item has completely exited the pull rollers. Even a momentary stop will cause a mark (heat line) on the laminated item.

Good, consistent lamination is a result of combining proper heat, tension and dwell time. Dwell time is controlled by the speed of the motor and is defined as the amount of time the material to be laminated is compressed between the heat rollers.

As a general rule, thicker items and film need to run at slower speeds because they extract more heat from the rollers at a quicker rate. Setting the speed control at slower settings gives the laminator longer dwell time thus allowing proper lamination of thick items. Thinner items, such as standard copier paper (20 lb. bond) and tissue paper, extract less heat from the rollers and can be run at faster speeds.

FILM TENSION

Proper film tension, known as brake tension, is the minimum amount required to eliminate wrinkles in the finished item. The film should be taut. A properly adjusted roll of film should not require excessive force to turn by hand.

Film tension should be enough to introduce a minor amount of drag as the film unrolls. Insufficient tension causes wrinkles, while too much tension causes stretching (necking). Uneven tension between the top and bottom rolls creates curl. Too much upper tension creates upward curl while too much bottom tension causes downward curl.

Adjustment of the pull roller clutch may be necessary if after adjusting unwind and rewind brake tensions do not improve your output quality.

Page 26

GBC 2064WF-1 specifications

The ACCO Brands GBC 2064WF-1 is a sophisticated lamination machine that is designed to cater to the needs of both professional and personal users. As part of the GBC brand known for its high-quality laminating solutions, this model stands out with its user-friendly features and advanced technology.

One of the main features of the GBC 2064WF-1 is its ability to laminate both hot and cold pouches, providing versatility for different lamination needs. This dual functionality allows users to preserve a range of materials from professional presentations to personal craft projects. The machine accommodates various pouch sizes, making it suitable for everything from ID cards to standard letter-sized documents.

A notable characteristic of the GBC 2064WF-1 is its fast warm-up time, typically around five minutes. This efficiency ensures that users can quickly start laminating, which is particularly beneficial for busy office environments or during time-sensitive projects. The device also offers a rapid lamination speed, allowing multiple documents to be laminated in a short amount of time, thus enhancing productivity.

Incorporating advanced technology, the GBC 2064WF-1 features an auto shut-off function that enhances safety by powering down the machine after periods of inactivity. This is particularly important in environments where safety precautions are a top priority. Additionally, the machine includes a jam prevention system that minimizes the risk of document jams, which can be a common frustration in lamination processes.

Furthermore, the GBC 2064WF-1 is designed with intuitive controls and an informative LED indicator. This ensures users can easily monitor the machine’s operation status, making it accessible even for those who may not have prior experience with laminating equipment.

The sleek and compact design of the GBC 2064WF-1 is another advantage, allowing it to fit seamlessly into various workspaces without occupying too much valuable space. Its durability and robust construction also guarantee long-lasting performance, making it a worthwhile investment for individuals and businesses alike.

In conclusion, the ACCO Brands GBC 2064WF-1 is a highly capable lamination machine that combines efficiency, versatility, and safety features. Whether for administrative work, educational purposes, or creative projects, this model meets the demands of diverse users, ensuring high-quality lamination every time.