Oven temperature, Too hot or too cold, Do not work | Hotpoint RB632

Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information

Before you call for service…

Troubleshooting Tips

Problem		Possible Causes	What To Do

Oven temperature		Oven thermostat	• See the Adjust the oven
too hot or too cold		needs adjustment.	thermostat—Do it yourself!
			section.

Clock and timer		Plug on range is	• Make sure electrical plug is
do not work		not completely	plugged into a live, properly
		inserted in the	grounded outlet.
		electrical outlet.

		A fuse in your home	• Replace fuse or reset
		may be blown or the	circuit breaker.
		circuit breaker tripped.

		Oven controls	• See the Using the clock
		improperly set.	and timer section.

Oven door is		The door is out	• Because the oven door is
crooked		of position.	removable, it sometimes
			gets out of position during
			installation. To straighten
			the door, push down on
			the high corner.

Power outage		Power outage or surge.	• Some models will
			automatically resume their

setting once the power is restored. On models with a clock, you must reset the clock. If the oven was in use, you must reset it by turning the Oven Temperature knob back to OFF, setting the clock and resetting any cooking function.

38

Image 38

Hotpoint RB632 Oven temperature, Too hot or too cold, Clock and timer, Do not work, Oven door is, Crooked, Power outage

Contents

Ranges Write the model and serial numbers here Staple sales slip or cancelled check hereCongratulations You Are Now Part of the Hotpoint Family Hotpoint & You Service Partnership Important Safety Notice All ranges can tip and injury could result Safety Precautions Safety Information When Cooking PORK… Oven Surface Cooking Units Customer Service Troubleshooting Tips REMEMBER… Surface Cookware Tips Using the surface unitsHow to Set Wok Cooking Using the clock and timer Clock and Timer Features To Cancel the Timer To Set the TimerTo Reset the Timer To Set the Clock Customer Service Troubleshooting Using the ovenOven Temperature Knob Before you begin… Aluminum Foil Preheating and Pan PlacementHow to Set the Oven for Broiling Broiling guide Comments Adjust the oven thermostat-Do it yourself To Adjust the Thermostat Oven Vent Care and cleaning of the rangeControl Panel and Knobs Painted Surfaces Lift-Off Oven Door To clean the inside of the doorTo clean the outside of the door Oven Shelves Oven Light Replacement on some modelsOven Heating Elements To remove the cover To remove the storage drawer How to Remove the Storage Drawer to Clean Under the RangeBroiler Pan & Grid To replace the storage drawer Porcelain Enamel Cooktop Lift-Up Cooktop on some models To remove a surface unit Surface UnitsDrip Pans To replace a surface unit Continuous-cleaning oven cleans itself while cooking To Clean the Continuous-Cleaning Oven Let the range parts cool before handling Porcelain Oven Interior on some models Installation of the range Before You Begin Prepare the Opening Flooring Under the Range Prepare for Electrical Connection Power Cord Strain Relief Installation Strain relief, they can be removed for better fit Wire Power Cord Installation Before After Wire Conduit Installation Conduit Final Check Anti-Tip Bracket InstallationLeveling the Range Before you call for service… Food does not Food does not bakeOr roast properly Broil properly At Broil Power outage Oven temperatureClock and timer Too hot or too cold One Year Hotpoint Range WarrantyWe Will Replace, At No Charge To You TDD 800-TDD-GEAC Service Telephone NumbersIn-Home Repair Service 800-GE-CARES