Hotpoint RB533 To Clean the Continuous-Cleaning Oven, Let the range parts cool before handling

Models: RB525 RB632 RB536 RB526 RB533

1 40
Download 40 pages 50.55 Kb
Page 25
Image 25
To Clean the Continuous-Cleaning Oven

Do not use soap, detergent, steel wool pads, commercial oven cleaner, silicone oven sprays, coarse pads or coarse brushes on the porous surface. These products will spot, clog and damage the porous surface and reduce its ability to work.

Do not scrape the porous surface with a knife or spatula—they could permanently damage the finish.

To Clean the Continuous-Cleaning Oven

Let the range parts cool before handling.

1

Remove shelves and cookware, including the broiler pan

and grid.

 

 

Remove excess spills and boilovers from the aluminum foil oven

2

bottom liner before removing the liner from the oven. This is to

 

 

prevent excess liquids from spilling onto the porous finish. Then

 

remove aluminum foil bottom liner and clean with a damp cloth.

 

(Before cleaning or removing the aluminum foil liner, lift the

 

bake element out of the way.)

 

Soil visibility may be reduced by operating the oven at 400°F.

3

Close the door and set the Oven Temperature knob to 400°F.

 

Time for at least 4 hours. Repeated cycles may be necessary before improvement in appearance is apparent.

REMEMBER: During the operation of the oven, the door, window and other range surfaces will get hot enough to cause burns. Do not touch. Let the range cool before replacing the oven shelves and aluminum foil oven bottom.

4 If a spillover or heavy soiling occurs on the porous surface, as soon as the oven has cooled, remove as much of the soil as possible using a small amount of water and a stiff-bristle nylon brush. Use water sparingly and change it frequently, keeping it as clean as possible, and be sure to blot it up with paper towels, cloths or sponges. Do not rub or scrub with paper towels, cloths or sponges, since they will leave unsightly lint on the oven finish. If water leaves a white ring on the finish as it dries, apply water again and blot it with a clean sponge, starting at the edge of the ring and working toward the center.

Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service

25

Page 25
Image 25
Hotpoint RB533, RB526, RB536, RB632, RB525 To Clean the Continuous-Cleaning Oven, Let the range parts cool before handling